Powertap Wheel Build Advice?

Discuss light weight issues concerning road bikes & parts.
eric
Posts: 2196
Joined: Tue Nov 11, 2003 9:47 pm
Location: Santa Cruz, California, USA
Contact:

by eric

Ghost234 wrote:
timsterc wrote:Just use an Open Pro with 28 spokes. It is nothing fancy, but it is bombproof.


I'd recommend an XR270 rather than an Open Pro. My experience with Open Pros on a Powertap was poor. They're not very stiff rims and they eventually crack at a spoke hole. XR270s weigh the same or a little less and are stiffer due to larger cross section, making a stronger wheel that lasts longer.

You can lace the PT hub 1x heads in on the DS to increase the bracing angle. Supposedly the G3 hub flange spacing was improved over the older PT hub I have, so it may not work on the G3.

by Weenie


User avatar
kavitator
Posts: 1148
Joined: Sun Sep 21, 2008 9:07 pm
Location: Slovenia---that forest land

by kavitator

i am looking for good powertap wheel

will be 60mm carbon tubular rim good- 24 holes (internal nipples)- DS 1x heads in, NDS 2x
sapim cx ray spokes
max spoke tension 130kg
for training and racing on elite level?

Post Reply
  • Similar Topics
    Replies
    Views
    Last post