Page 1 of 1

Prologo Scratch

Posted: Sun Feb 20, 2011 6:10 pm
by Limerick23
Hi,
Could anybody give the height of the Prologo Scratch measured from the low part of the dip in the saddle and the very bottom of the rails.

Thanks

Re: Prologo Scratch

Posted: Mon Feb 21, 2011 6:51 pm
by Calnago
Pretty darn close to 50mm (Scratch Nack Pro) as seen on my bike (click below). The Nack version has carbon rails which may be a millimeter or two thicker.

I thought it was one of the lower profile saddles I could get but compared to my Selle Italia SLR Team that I have on another bike its height is at least 1-1.5 cm greater. Plus it's not as flat as the Selle Italia so I end up sitting a bit higher, meaning I didn't end up with quite as much seatpost showing as I thought i was going to have. That's ok though, because I completely buried the LTD on the Dorico LTD seatpost, rather than cutting off the just the D like I thought I'd end up doing. Still looks good on a traditional build I think. I'm assuming you're trying to calculate how much seatpost you might have showing on a new build or something?

Re: Prologo Scratch

Posted: Tue Feb 22, 2011 9:09 am
by maxxevv
Sounds like an ISP concern though .. ? :noidea:

Prologo Scratch

Posted: Tue Feb 22, 2011 11:11 am
by Calnago
Could be, but limerick23 doesn't say why he wants to know, just asks the dimension. Limerick23, are you considering a frame with an integrated seatpost or are you just trying to determine how things might look aesthetically?

Re: Prologo Scratch

Posted: Thu Feb 24, 2011 11:37 pm
by Limerick23
Its to get a lower saddle as seatpost is maybe a tad too low, so for aesthetic.

Re: Prologo Scratch

Posted: Fri Feb 25, 2011 3:21 pm
by majklnajt
I had Prologo Scratch. Its 5 cm tall in the front clamp area. Liked it a lot! Looks great!!! (see i n my link pics)
Now I have Scratch Nack and its 4,5 cm tall and a litlle harder. Like it.

Re: Prologo Scratch

Posted: Mon Feb 06, 2012 8:20 pm
by Farnit
The Nago Evo is more comfortable