Page 63 of 77
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Wed Aug 11, 2021 3:31 pm
by Raymonndo
I've just found this thread! Does anyone make a Specialized SWAT Saddle mount for a Garmin Varia RTL515? That would be amazing if so.
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Wed Aug 11, 2021 3:31 pm
by Weenie

Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Wed Aug 11, 2021 5:36 pm
by johnrho
Raymonndo wrote:I've just found this thread! Does anyone make a Specialized SWAT Saddle mount for a Garmin Varia RTL515? That would be amazing if so.
https://www.shapeways.com/product/GTBT3 ... li=ostatus
Sent from my iPhone using Tapatalk
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Mon Aug 16, 2021 9:39 pm
by kode54
Hey Bud…perfect execution of the medium length saddle mount for the Garmin Varia.
Thx so much.

Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Wed Sep 01, 2021 12:41 pm
by Wadl
(edit: I was wrong)
Re: Varia mount for the new Venge
Posted: Wed Sep 01, 2021 12:43 pm
by Wadl
(edit: I was wrong)
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Wed Sep 01, 2021 1:25 pm
by WheresWaldo
@Wadl
That plug is from a 2019+ Venge.
It might fit on a Tarmac but that picture is not a Tarmac, unless you are telling me the owner put 'venge' stickers on his Tarmac.

Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Fri Sep 03, 2021 7:22 pm
by Wadl
oh, my bad, probably one of the last Venge sold..

Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Fri Sep 03, 2021 10:41 pm
by WheresWaldo
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Sat Sep 04, 2021 7:57 pm
by Wadl
WheresWaldo wrote: ↑Fri Sep 03, 2021 10:41 pm
If you ever wanted to mount your Varia sideways, I built this mount for someone. I have permission to report the images here.
LOL it's me !

Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Sat Sep 04, 2021 8:44 pm
by WheresWaldo
Wadl wrote: ↑Sat Sep 04, 2021 7:57 pm
WheresWaldo wrote: ↑Fri Sep 03, 2021 10:41 pm
If you ever wanted to mount your Varia sideways, I built this mount for someone. I have permission to report the images here.
LOL it's me !
Too funny

Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Mon Sep 06, 2021 12:33 pm
by 1sanglier
Is it work fine in this position ?
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Mon Sep 06, 2021 2:10 pm
by WheresWaldo
@1sanglier,
My guess is that the cone of detection is exactly that, a 'cone'. But Garmin might have put a shaping lens on the detector, so only Garmin would know with 100% certainty.
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Tue Sep 07, 2021 2:07 pm
by Wadl
1sanglier wrote: ↑Mon Sep 06, 2021 12:33 pm
Is it work fine in this position ?
Yes, I've been using that Varia for a long time and I didnt notice any difference between the vertical and the horizontal position !

(P.S. by the way, those are my pics, I am the one using it like that

)
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Tue Sep 21, 2021 7:04 am
by aquilinx
Hi thank you for making all these amazing mounts.

I am wondering can you push this inward and shorten this for a couple of mm so that the rear light sticks with the saddle even more?
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Tue Sep 21, 2021 7:04 am
by Weenie

Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Camera Mounts and Assorted 3D Printed Parts
Posted: Tue Sep 21, 2021 3:12 pm
by WheresWaldo
@aquilinx,
Which mount is that, I could make it a bit deeper and adjust the angle if you like. I can't do anything until I return home from visiting my parents on October 1.