Fitment of the Di2 junction under Garmin mount was spot on. Excellent 3D printing and all. Thx so much Bud!
Camera Mounts and Assorted 3D Printed Parts
Moderators: robbosmans, Moderator Team
The Strada Varia mount was also great, although the actual mount could be moved up 15mm and 7mm closer to the post. If you made those changes, I would buy that to replace the one I just received.
With the changes, it would hide the actual mount from behind so you wouldn’t see the bolts.
With the changes, it would hide the actual mount from behind so you wouldn’t see the bolts.
-- Factor Ostro VAM Disc
-- Specialized Aethos Disc
-- Guru Praemio R Disc
-- Factor LS Disc
-- Sturdy Ti Allroad Disc
-- Specialized Aethos Disc
-- Guru Praemio R Disc
-- Factor LS Disc
-- Sturdy Ti Allroad Disc
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Here’s one with the Varia on so you can see what I’m talking about. Maybe even 10mm closer to the seatpost. I know probably the top bolt may get in the way but as high up as possible.
-- Factor Ostro VAM Disc
-- Specialized Aethos Disc
-- Guru Praemio R Disc
-- Factor LS Disc
-- Sturdy Ti Allroad Disc
-- Specialized Aethos Disc
-- Guru Praemio R Disc
-- Factor LS Disc
-- Sturdy Ti Allroad Disc
-
WheresWaldo
- in the industry
- Posts: 887
- Joined: Fri Oct 13, 2006 12:52 am
- Location: North Carolina
@kode54
I will work on something next week. Been offline for a few days as I was building a new PC (only took me 15 months to wait for a GPU). I have everything finally set up, so I can get back to it soon.
I will work on something next week. Been offline for a few days as I was building a new PC (only took me 15 months to wait for a GPU). I have everything finally set up, so I can get back to it soon.
-
WheresWaldo
- in the industry
- Posts: 887
- Joined: Fri Oct 13, 2006 12:52 am
- Location: North Carolina
@kode64, I managed to get this finished this morning.
It is at the same link as before, http://shpws.me/SBP9. I left it still rendering the model images.
It is 11 mm higher and approximately 5 mm closer to the seat post (maybe even closer than that).
It is at the same link as before, http://shpws.me/SBP9. I left it still rendering the model images.
It is 11 mm higher and approximately 5 mm closer to the seat post (maybe even closer than that).
That is perfect. Will order and post a pic when I get it. Thx again!
Any chance to get the Varia Saddle Rail mount to be slightly lower? It hits the Gelu saddle a bit. Need that about 10mm lower. Here's a pic in the next post.
Any chance to get the Varia Saddle Rail mount to be slightly lower? It hits the Gelu saddle a bit. Need that about 10mm lower. Here's a pic in the next post.
-- Factor Ostro VAM Disc
-- Specialized Aethos Disc
-- Guru Praemio R Disc
-- Factor LS Disc
-- Sturdy Ti Allroad Disc
-- Specialized Aethos Disc
-- Guru Praemio R Disc
-- Factor LS Disc
-- Sturdy Ti Allroad Disc
-
WheresWaldo
- in the industry
- Posts: 887
- Joined: Fri Oct 13, 2006 12:52 am
- Location: North Carolina
Yeah, I can make a variant that is 10 mm lower.
-
WheresWaldo
- in the industry
- Posts: 887
- Joined: Fri Oct 13, 2006 12:52 am
- Location: North Carolina
-
WheresWaldo
- in the industry
- Posts: 887
- Joined: Fri Oct 13, 2006 12:52 am
- Location: North Carolina
I thought I would post this here as it is an interesting look at using the HP MultiJetFusion printer at Shapeways.
https://www.shapeways.com/blog/archives ... beads.html
Please note that PA12 with glass beads is only available for any model you personally upload and is not a Public facing material.
https://www.shapeways.com/blog/archives ... beads.html
Please note that PA12 with glass beads is only available for any model you personally upload and is not a Public facing material.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
