painting a carbon steerer black

Questions about bike hire abroad and everything light bike related. No off-topic chat please

Moderator: Moderator Team

Post Reply
Posts: 839
Joined: Mon Dec 14, 2009 6:26 pm

by konky

I want to paint a section of a fork steerer tube as it's exposed after fitting a new insubstancial Extralite stem. My guess an auto shop would be the best place to get a suitable paint to cover the yellowish steerer. Any other ideas?

Posts: 340
Joined: Mon Nov 17, 2008 9:56 pm

by motorthings


by Weenie

User avatar
Posts: 1235
Joined: Thu Aug 25, 2005 7:09 pm
Location: In the industry

by elviento

Pretty much any method should work. A proper paintjob may add thickness to it and installation could create unsightly marks which could be exposed.

I say just leave it alone.
Fast falcons:" onclick=";return false;
Facebook: falcobikeglobal

Posts: 260
Joined: Thu Sep 30, 2010 3:32 pm
Location: S.E. TN

by lechat

If you really want to do it, mask the area off carefully and hit it with adhesion promoter ( Bulldog, Duplicolor ) followed by paint. Rattlecan for both.

Posts: 839
Joined: Mon Dec 14, 2009 6:26 pm

by konky

I've found a perfect solution for this one. Believe it or not it's electrical tape. I happened to have some knocking around and it was the perfect width and tone of black. You really can't see it, all you see is black.

Posts: 323
Joined: Fri May 21, 2010 3:08 am
Location: Milton, Canada

by nspace

Would be surprised if the paint stayed, or thickness of paint didn't cause problems with mounting an Extralite. In my experience, the Extralite stem is hard enough to slide onto the steerer without anything on it, at least on my Enve 2.0. If the fit is tight, I think I would just take a sharpie once it was installed and color the exposed area.

by Weenie

Post Reply
  • Similar Topics
    Last post