The Canyon love thread

[Peter_E]

Contemplating purchasing a Canyon Ultimate in size small. 177.5cm tall with an inseam 86.5cm. I ride with my saddle aproximately 77cm. I recently test rode a giant tcr in size medium that felt nice with about 8cm of drop but the giant has a pretty tall spacer stack. Since I'm more leg I think the small is the best fit but what drop would I have with the Canyon with all 27.5mm of spacers? Thanks

I am 1.78 and 75 saddle height and chose the Endurace disc in S which has a bit more stack than the uktimate. Used to have the old ultimate i M and it was fine too but prefer the S.


Skickat från min iPhone med Tapatalk

[95s10nj]

Contemplating purchasing a Canyon Ultimate in size small. 177.5cm tall with an inseam 86.5cm. I ride with my saddle aproximately 77cm. I recently test rode a giant tcr in size medium that felt nice with about 8cm of drop but the giant has a pretty tall spacer stack. Since I'm more leg I think the small is the best fit but what drop would I have with the Canyon with all 27.5mm of spacers? Thanks

I am 1.78 and 75 saddle height and chose the Endurace disc in S which has a bit more stack than the uktimate. Used to have the old ultimate i M and it was fine too but prefer the S.


Skickat från min iPhone med Tapatalk

What's your drop with the endurace small with your saddle at 75cm? How many spacers do you have? Thanks

[95s10nj]

Contemplating purchasing a Canyon Ultimate in size small. 177.5cm tall with an inseam 86.5cm. I ride with my saddle aproximately 77cm. I recently test rode a giant tcr in size medium that felt nice with about 8cm of drop but the giant has a pretty tall spacer stack. Since I'm more leg I think the small is the best fit but what drop would I have with the Canyon with all 27.5mm of spacers? Thanks

I'd suggest a size medium for you. With that you can decrease the spacers and it would still have a nice drop.

The reach on the canyon medium is 391mm compared to the tcr 383mm and I was using the full stack of spacers on the tcr. I wouldn't want to go any longer so I'd probably have to run a 90mm stem min on the medium canyon.

[RPMfr]

Contemplating purchasing a Canyon Ultimate in size small. 177.5cm tall with an inseam 86.5cm. I ride with my saddle aproximately 77cm. I recently test rode a giant tcr in size medium that felt nice with about 8cm of drop but the giant has a pretty tall spacer stack. Since I'm more leg I think the small is the best fit but what drop would I have with the Canyon with all 27.5mm of spacers? Thanks

Hello,
i'm 178 cm with 86 cm inseam (saddle heigth 76 cm). I choose a M. I have approximatly 10 cm saddle bar drop.
Check here : viewtopic.php?f=131&t=83565&start=2310#p1441854

[Peter_E]

Contemplating purchasing a Canyon Ultimate in size small. 177.5cm tall with an inseam 86.5cm. I ride with my saddle aproximately 77cm. I recently test rode a giant tcr in size medium that felt nice with about 8cm of drop but the giant has a pretty tall spacer stack. Since I'm more leg I think the small is the best fit but what drop would I have with the Canyon with all 27.5mm of spacers? Thanks

Hello,
i'm 178 cm with 86 cm inseam (saddle heigth 76 cm). I choose a M. I have approximatly 10 cm saddle bar drop.
Check here : viewtopic.php?f=131&t=83565&start=2310#p1441854

And I have roughly 9 cm drop and 7 mm of spacers on my Endurace S and 75cm saddle height and 1.77 (or1.78) talll.


Skickat från min iPhone med Tapatalk

[95s10nj]

Contemplating purchasing a Canyon Ultimate in size small. 177.5cm tall with an inseam 86.5cm. I ride with my saddle aproximately 77cm. I recently test rode a giant tcr in size medium that felt nice with about 8cm of drop but the giant has a pretty tall spacer stack. Since I'm more leg I think the small is the best fit but what drop would I have with the Canyon with all 27.5mm of spacers? Thanks

Hello,
i'm 178 cm with 86 cm inseam (saddle heigth 76 cm). I choose a M. I have approximatly 10 cm saddle bar drop.
Check here : viewtopic.php?f=131&t=83565&start=2310#p1441854

Thanks. I'm almost positive I'd have to run a 90mm stem on the medium and was worried it may not be the best fit. What's saddle tip to the cl of the bars?

[Vermu]

Hopefully linked right and works.
Thought about going sub 6. Wasn’t commited enough and now it’s standing at 6,2.

Would be relatively easy to shave off 200g but like the current setup. Oval chainrings are far from lightest.


Sent from my iPhone using Tapatalk

[Peter_E]

Contemplating purchasing a Canyon Ultimate in size small. 177.5cm tall with an inseam 86.5cm. I ride with my saddle aproximately 77cm. I recently test rode a giant tcr in size medium that felt nice with about 8cm of drop but the giant has a pretty tall spacer stack. Since I'm more leg I think the small is the best fit but what drop would I have with the Canyon with all 27.5mm of spacers? Thanks

Hello,
i'm 178 cm with 86 cm inseam (saddle heigth 76 cm). I choose a M. I have approximatly 10 cm saddle bar drop.
Check here : viewtopic.php?f=131&t=83565&start=2310#p1441854

Thanks. I'm almost positive I'd have to run a 90mm stem on the medium and was worried it may not be the best fit. What's saddle tip to the cl of the bars?

It is hard to measure the integrated bar/stem. It sweeps back quite a bit. I run hydraulic SRAM so levers are longer fit is good for me even though it is slightly shorter on paper than the old bike (Scott Foil in 54)


Skickat från min iPhone med Tapatalk

[95s10nj]

Contemplating purchasing a Canyon Ultimate in size small. 177.5cm tall with an inseam 86.5cm. I ride with my saddle aproximately 77cm. I recently test rode a giant tcr in size medium that felt nice with about 8cm of drop but the giant has a pretty tall spacer stack. Since I'm more leg I think the small is the best fit but what drop would I have with the Canyon with all 27.5mm of spacers? Thanks

Hello,
i'm 178 cm with 86 cm inseam (saddle heigth 76 cm). I choose a M. I have approximatly 10 cm saddle bar drop.
Check here : viewtopic.php?f=131&t=83565&start=2310#p1441854

Thanks. I'm almost positive I'd have to run a 90mm stem on the medium and was worried it may not be the best fit. What's saddle tip to the cl of the bars?

It is hard to measure the integrated bar/stem. It sweeps back quite a bit. I run hydraulic SRAM so levers are longer fit is good for me even though it is slightly shorter on paper than the old bike (Scott Foil in 54)


Skickat från min iPhone med Tapatalk

Thanks. I ended up ordering the Ultimate in a small and should be here tomorrow so I guess i'll see how it fits. Hopefully the stack ends up being ok. Loved the flash blue on the endurace but I wasn't crazy about the 50/34-11-34 gearing and the flexy seatpost thing. I don't have much elevation here in southern New Jersey so that kind of gearing is uneccessary.

[MarekBns]

Hi,
I have H36 on my Aeroad.... How do you guys find this cocpit? I am quite happy with it for riding. But what I do not really like is the Di2 Junction Box placement and handling. I understood Canyon do not sell the CP10 as separate component yet... Anybody changed the H36 for different integrated one or even for stem + handlebar combo? Thanks for your ideas and feedback.
Cheers

[d3kalb]

Could you point me to where you got your bottle cages? Thanks!

[Henry]

I have the Ultimate CF SLX 9.0 SL on order and was a bit confused by the new CP10 Aerocockpit. I want a really nice solution for fitting my Wahoo Elemnt Bolt and a light out front (gopro type adapter).

Will this mount fit the CP10 aerocockpit, (screw dimensions as well as hole spacing in the mount? The mount was designed for the H31 aerocockpit.

https://www.ebay.com/p/Lezyne-GPS-Compu ... 3283390926

EDIT: Answering my own question:

This mount seems to work with both the H31 and CP10 so that should work.
https://www.canyon.com/sv-se/accessorie ... 6#id=60442

/EDIT

My idea was to pair it with this adapter:

https://www.trekbikes.com/se/sv_SE/cyke ... Code=black

Have you seen any better/lighter option than the Ebay mount above? My idea is then to put this light underneath:

https://www.trekbikes.com/se/sv_SE/cyke ... Code=black

[95s10nj]

I have the Ultimate CF SLX 9.0 SL on order and was a bit confused by the new CP10 Aerocockpit. I want a really nice solution for fitting my Wahoo Elemnt Bolt and a light out front (gopro type adapter).

Will this mount fit the CP10 aerocockpit, (screw dimensions as well as hole spacing in the mount? The mount was designed for the H31 aerocockpit.

https://www.ebay.com/p/Lezyne-GPS-Compu ... 3283390926

EDIT: Answering my own question:

This mount seems to work with both the H31 and CP10 so that should work.
https://www.canyon.com/sv-se/accessorie ... 6#id=60442

/EDIT

My idea was to pair it with this adapter:

https://www.trekbikes.com/se/sv_SE/cyke ... Code=black

Have you seen any better/lighter option than the Ebay mount above? My idea is then to put this light underneath:

https://www.trekbikes.com/se/sv_SE/cyke ... Code=black

I just got a new ultimate with the cp10 bar and I purchased the canyon mount from them with the bike then purchased the 15 dollar wahoo garmin adapter to use with my bolt. Wahoo also sells a complete mount that will work with the canyon. Haven't thought about my plans for a light yet.

https://www.wahoofitness.com/devices/ac ... olt-aero-2

https://www.wahoofitness.com/devices/ac ... ter-elemnt

Hi,
I have H36 on my Aeroad.... How do you guys find this cocpit? I am quite happy with it for riding. But what I do not really like is the Di2 Junction Box placement and handling. I understood Canyon do not sell the CP10 as separate component yet... Anybody changed the H36 for different integrated one or even for stem + handlebar combo? Thanks for your ideas and feedback.
Cheers

The new cp10 with the bar end junction box is pretty sweet. It was unexpected since I thought they were still using the bars with the junction box underneath the stem.

[Henry]

Thank you, yes, I ordered that too as a temporary/race day solution but wanted something that also carries the light. Can you please post a few pics of the CP10, specially from underneath would be really interesting to see.

I have the Ultimate CF SLX 9.0 SL on order and was a bit confused by the new CP10 Aerocockpit. I want a really nice solution for fitting my Wahoo Elemnt Bolt and a light out front (gopro type adapter).

Will this mount fit the CP10 aerocockpit, (screw dimensions as well as hole spacing in the mount? The mount was designed for the H31 aerocockpit.

https://www.ebay.com/p/Lezyne-GPS-Compu ... 3283390926

EDIT: Answering my own question:

This mount seems to work with both the H31 and CP10 so that should work.
https://www.canyon.com/sv-se/accessorie ... 6#id=60442

/EDIT

My idea was to pair it with this adapter:

https://www.trekbikes.com/se/sv_SE/cyke ... Code=black

Have you seen any better/lighter option than the Ebay mount above? My idea is then to put this light underneath:

https://www.trekbikes.com/se/sv_SE/cyke ... Code=black

I just got a new ultimate with the cp10 bar and I purchased the canyon mount from them with the bike then purchased the 15 dollar wahoo garmin adapter to use with my bolt. Wahoo also sells a complete mount that will work with the canyon. Haven't thought about my plans for a light yet.

https://www.wahoofitness.com/devices/ac ... olt-aero-2

https://www.wahoofitness.com/devices/ac ... ter-elemnt

Hi,
I have H36 on my Aeroad.... How do you guys find this cocpit? I am quite happy with it for riding. But what I do not really like is the Di2 Junction Box placement and handling. I understood Canyon do not sell the CP10 as separate component yet... Anybody changed the H36 for different integrated one or even for stem + handlebar combo? Thanks for your ideas and feedback.
Cheers

The new cp10 with the bar end junction box is pretty sweet. It was unexpected since I thought they were still using the bars with the junction box underneath the stem.

[MarekBns]

The new cp10 with the bar end junction box is pretty sweet. It was unexpected since I thought they were still using the bars with the junction box underneath the stem.

Can imagine :-/
Unfortunately Canyon says it is not clear whether and when they will offer CP10 to aftermarket... so I am considering the stem + handlebar (Specialized Aerofly 2) combo....