Show us your sub-6kg builds

[RyanH]

I figured a thread to aggregate the sub-6kg builds would be nice. Probably should be a thread for sub-5kg since those are true WW builds while the sub-6kg crowd is more or less just crossing the lines of a WW build (in my opinion).

I'll go first:



A Ti Reunion: My WW Litespeed Xicon - 5.76kg (HiRes Pics Up)



My attempt at a WW Colnago C59 @ 5.70kg

[AZR3]

Hoping to get my R3 under 6k, I'm right on the edge at 6290 but soon I should be dropping some grams!

And that's with Power2Max Type S power meter and BBInfinte bottom bracket, so those two things right there added 166g over the stock spider and bottom bracket

[RyanH]

Pssh...I've done both of mine with a powermeter and heavy frames, one of which is 1300g!

[AZR3]

Well I don't run tubs so that's a couple hundred grams right here as well. Also not running any exotic parts, zipp bars, rotor crank and 1350g Alu clinchers.

[kevosinn]

Here is a few for you.

my 4.64 kg Scott addict. (paint stripped to save weight)



And my latest Cryptic frame. 5.6 kg with a full di2 group.

[kakan]

That last Cryptic was wonderful!

[Marin]

My FM066 @ 5.98kg:



Switching from Contis to SWorks got me back above 6000g though, currently it's sitting @ 6.09kg and looks like this:



I have absolutely no idea where I could save some 100g without spending a fortune or losing functionality...

I want aero bars & wheels, fast clinchers, oval chainrings, 11-28 cassette, padded saddle, steel pedal spindles, normal cable housing. Suggestions?

[akaricerocket]

my Cervelo 5.68kg 12.5lbs

and trek District 5.45kg 12lbs

[Vallinotti]

Here is the mine





Frame - AX-Lightness Vial EVO 52cm
Fork - THM Scapula CT
Headset - AX-Lightness stock
Wheels - Meilenstein Obermayer Tubular
Tires - Continental Competition 22mm
Skewers - Lightweight
Crankset - THM Clavicula M3 110mm / SRM
Chain - KMC X11SL-DLC-Black
Chainrings - Praxis Works 52/36
Front derailleur - Sram Red 22
Rear derailleur - Sram Red 22
Chain Catcher - Carbonice
Shifters - Sram Red 22
Cassette - Sram Red 22
Brakes - THM Fibula
Stem - AX-Lightness Rigid 120mm
Handlebar - MCFK without stickers
Handlebar plugs - Carbonice
Handlebar tape - Deda Elementi cork
Seatpost - AX-Lightness stock
Seatpost - AX-Lightness Daedalus 27.2x350mm
Saddle - AX-Lightness Leaf
Pedals - Time Xpresso 15
Brake housing system - AICAN Bungarus housing and cables
Shift housing system - Power Cordz Swift Cable System
Bottle cage - Mighty

[sugarkane]

My Parlee when it was 5.3kgs



And at 5.7kgs with the race wheels

[jsinclair]

I'm pretty sure this was 5.8kg in this photo. Maybe it was with slightly different wheels, i cant quite remember.

[sugarkane]

A beautiful machine Jsinclair

[BmanX]

Some stunning builds. I can't wait for someone to build a frame using SRAM eTap and the frame only has a cable run for the rear brake. This would be exciting for me to see.

[stevec1975]

5.69 KG Scott CR1:



I am thinking of Sram Red eTap on this, when I can get hold of the parts, at which point I will strip off the paint on the frame, remove cable stops etc.

[cerro]

My old Cannondale Caad10, missed alu in this thread. 5,74kg: