Show us your sub-6kg builds

[reedplayer]

The Polygon looks good.

[xsnailx]

Further weight reduction with extralite chainrings and new wheelset (Farsports rims ~215g each / DT aerolite / bitex rear hub, novatec front hub and VITTORIA Corsa Speed 23 mm tubulars)


the topic is here:
viewtopic.php?f=10&t=163212

[poulhansen]

Cannondale six13, 5.59kg

[stevieboy]

56cm Fuji SL
5.815kg
With 49mm Caden tubs
Have new seatpost and skewers on the way
Should be 5.7ish soon




Sent from my iPad using Tapatalk

Got anything else.... Your selling

[MihaiZarnescu92]

Merlin Extralight Double Butted Titanium 1996 Frame
Mizuno Full Carbon 1" Fork
Campagnolo Super Record 11V Derailleurs \ Shifters \ Cassette \ Chain
Lightweight Standard III Wheels
THM Clavicula Crankset \ Bottom bracket \ THM Fibula Brakes
Chris King 1" Headset
Extralite Stem \ Garmin Hanger \ Skewers \ Pulleys
Darimo Seatpost \ Handlebar
WR Compositi Saddle
Carbon TI X-Cap Headset \ Crankset & Bottlecage Bolts \ Chain Rings
Carbon Works Bottlecages
Look Keo Carbon TI Pedals
Alligator I-Link Cable Housing
Total weight 5.95KG.

[C36]

In 20 years of WW I don’t think I ever posted a complete bike… I have a built story but never satisfied by the writing🫣

In the meantime 5870g in aero version ready for the Alps (mean GPS, assioma PM, 11-32 cassette)

Can drop 200g with the CCUs and the Corsa Speed that is the very best version of the bike, but use only during properly planned rides.

Few “just for the pleasure of attention to details cause this is WW”
- hollow Ti screws


- Ti hoods collars (collar and screws) with carbon plates
- Differentiated Ti QR (carbon Ti on front, Corima with thick Ti axle at the rear and home made final nut)

Attention to details on the finish
- Lucendi 3D printed spacers for the Farsport bar


- Lucendi 3D printed Wahoo bolt for the bar


- bars wrapped trop down (no electrical tape to finish)
- shrink tube to finish the brake cables
- shrink fabric to secure the di2 cables

And probably the geekiest thing… out of curiosity, temperature stripes to see the max temp recorded with my rim brakes (there are under the latex tube too)

[idinfo68]

Specialized Aethos SUB5

[poulhansen]

Focus Izalco Max 4.418 kg

[tarmackev]

That Izalco's very cool. I love the bulid.

[Jermond]

So sad .... not a single disc brake rotor in sight!
So, what is the average cost to build these bikes?

[spdntrxi]

So sad .... not a single disc brake rotor in sight!
So, what is the average cost to build these bikes?

look up a couple post

[HumanReason]

Colnago Master X-Light (Final Weight: 5.84kg)

3rd iteration of this build, a little lighter each time and finally sub 6kg.






Frame: Colnago Master X-Light 56cm, 1730g
Fork: Columbus Minimal, 325g uncut
Brifter: Campy Super Record (2014)
Front Derailleur: Campy Super Record (2014)
Rear Derailleur: Campy Super Record (2014)
Crankset: THM Clavicula SE, 301g
BB: THM, 75g
Brakes: Ciamillo Gravitas, 146g
Brake Pads: Corima Carbon 2.0, 10g
Chainrings: Extralite, 104g
Chainring Bolts: Extralite, 9
Cassette: Recon Aluminium, 110g
Chain: Campy Record
Cables/Housing: Jagwire Elite Link
Pedlas: Speedplay Zero Ti, 163g
Bars: Darimo, 132g
Stem: Deda Superlegerra, 110g
Seatpost: Darimo T1, 71g
Saddle: Selle Italia SLR Tekno, 93g
Hubs: Extralite UltraHub
Spokes: Sapin Race
Rims: Farsports 25T-23UL (20h/24h), 225g/227g
Tires Veloflex Record tubular, 200g
Skewers: KCNC fluted ti (front) 16g, Delta Bolt-on (rear) 34g
Heatset: Chris King 1", 73g
Tape: Newbaum Cloth, 32g
Expander: Columbus 1", 23g
Top Cap + Bolt: Carbon Cap, Schmolke Carbon Bolt, 2g
Bar End Caps: Doain Cycling, 5g

[Nixster]

Amazing weight for such a heavy frame.
Although the 11g cassette must help

[Turrifik]

Just barely sub 6 ready to ride. Have since changed the RD and FD


Sent from my iPhone using Tapatalk