the Cipollini club

Moderator: Moderator Team

Post Reply
User avatar
kgt
Posts: 6779
Joined: Sun Jun 18, 2006 10:29 am
Location: Athens, Greece

by kgt

All Cipollinis are very stiff at the BB, Bond included. Maybe RB1K is even stiffer but I doubt you will ever need anything stiffer than the Bond. At least IME.

Cyclemark
Posts: 4
Joined: Fri Jun 23, 2017 9:34 pm

by Cyclemark

Work in progress

Image


Sent from my iPhone using Tapatalk

User avatar
kgt
Posts: 6779
Joined: Sun Jun 18, 2006 10:29 am
Location: Athens, Greece

by kgt

:thumbup:

MiddMan
Posts: 147
Joined: Sun Jun 07, 2015 4:54 pm

by MiddMan

Hey all, looking for stem and bar suggestions for my Cipo RB800. It’s the last piece I need before I start the build! I live very far from a LBS so impossible to try in person. But I do know I want compact with traditional bend (not ‘ergo’).

Aesthetics and ergonomics are important so I’m leaning toward Deda. It looks good on a Cipollini. Question is:

1) Superleggero / Superleggera combo
2) Ditto, but 35 version (although I absolutely need to be able to tape top of bars too)
3) Superzero bar and stem (I don’t like aero bars, but they seem fairly tame; but again, I need to be able to tape bars up on the flats too or no deal... I also want flat transit from bar to Campy Record hoods, ands it hard to tell if it’s possible with superzero—very little about them online)
That said,
4) Superzero stem with Superleggera bars

Feel free to post response on my other thread to keep this one on topic.

Dowks
Posts: 70
Joined: Sat Aug 03, 2013 2:47 pm
Location: Surrey, England

by Dowks

@leej88

I am also on the large side (90kg, 184cm) and have a Bond and NK1K.

I find the Bond a better bike for the roads around me (Surrey, UK) with broken road surfaces, chip seal etc. on longer rides. The NK1K is a much more direct feel for me than the Bond, not worse just different. The Bond gets more mileage as a result, love it. I have riden the NK1K in local TT and its fantastic when you are trying to go as fast as possible, which ain't that fast for me, but it's all relative :lol:

Riding both bikes on wide rims with 25mm tyres

Look595
Posts: 31
Joined: Mon Jan 23, 2017 3:55 am

by Look595

I am confused which of the Cipollini frame should i go for as there are just too many models available. May i also ask would it be advisable to get the old RB1k since the RB1k The One is out in the market now. Thanks :)

nestornnk
Posts: 153
Joined: Sun Aug 10, 2014 3:44 pm
Contact:

by nestornnk

NK1K size medium. 7kg with Record and Bora Ultra tubulars.
While it is been a long time since i had my Bond lets see how this goes compared to
BondImage


Sent from my iPhone using Tapatalk

FilmAt11
Posts: 255
Joined: Sun Jan 09, 2011 2:35 am

by FilmAt11

Nice build Nestor. What size in each bike? I see the geometry differs.

nestornnk
Posts: 153
Joined: Sun Aug 10, 2014 3:44 pm
Contact:

by nestornnk

My bond was large and this is medium.Usually i am riding a 52s Colnago which fit me really good.
Back to mechanical with this one and it feels really strange....

I will try to post a review how this rides comparing to Bond and a C60

jwied82
Posts: 7
Joined: Tue Aug 08, 2017 1:53 am

by jwied82

Just picked this a few days ago:

Image

Didnt need it at all, but got a good deal on the complete bike.
Havent ridden it or even put pedals on it as we are in the middle of a 2+ week stretch of nothing above 20F where i live.
Weight is 7.16 kg (without pedals) which i am really happy with.. i was expecting heavier with Ultegra Di2 considering the Bond is not a particularly light frame.
May end up changing saddle if the SLR doesnt agree with my backside and might have to change to a 120 or 130 stem since the Bond doesn't really have all that long of a reach/top tube.

Looking forward to riding it, hopefully next week. Will be my first experience with electronic shifting.

zappafile123
Posts: 323
Joined: Sun Jun 01, 2014 8:24 am

by zappafile123

Can anyone comment on differences in ride quality between the RB800 and the NK1K? I'm thinking of offloading my XR4 and moving onto a Cippo - I've been meaning to get one for a while and both frames are available with the former being about 2k cheaper than the latter.
Bianchi Oltre XR4 |BMC SLR01 16' |Cannondale SS Evo HM 12'| Focus Izalco Max | Ridley Helium SL 15' | Basso Diamante 15' | Bianchi Oltre XR2 | Scapin Dyseys S8 | Time ZXRS | Giant TCR SL 12' | Ridley Noah 08' | Look 585 | Cervelo Soloist SLC

nismosr
Posts: 1023
Joined: Mon May 05, 2008 5:15 pm

by nismosr

Hi, wanted to find out which BB do I need for rb800 which has a bb386 bottom bracket If i were going to use a 3d+ p2m crankset. Thank you

zappafile123
Posts: 323
Joined: Sun Jun 01, 2014 8:24 am

by zappafile123

nismosr wrote:
Wed Mar 07, 2018 5:56 pm
Hi, wanted to find out which BB do I need for rb800 which has a bb386 bottom bracket If i were going to use a 3d+ p2m crankset. Thank you
A Rotor PF4630 BB will fit - The 3D+ crankset has a 30mm spindle thats long enough to fit into a BB386 frame. The only difference between PF30 and BB386 is the width of the shell which limits which cranksets will fit e.g. a BB30 crank wont fit becuase the spindle isnt long enough. Luckily for you Rotor thought ahead and made their cranksets compatible with pretty much everything on the market.
Bianchi Oltre XR4 |BMC SLR01 16' |Cannondale SS Evo HM 12'| Focus Izalco Max | Ridley Helium SL 15' | Basso Diamante 15' | Bianchi Oltre XR2 | Scapin Dyseys S8 | Time ZXRS | Giant TCR SL 12' | Ridley Noah 08' | Look 585 | Cervelo Soloist SLC

nismosr
Posts: 1023
Joined: Mon May 05, 2008 5:15 pm

by nismosr

zappafile123 wrote:
Thu Mar 08, 2018 12:27 am
nismosr wrote:
Wed Mar 07, 2018 5:56 pm
Hi, wanted to find out which BB do I need for rb800 which has a bb386 bottom bracket If i were going to use a 3d+ p2m crankset. Thank you
A Rotor PF4630 BB will fit - The 3D+ crankset has a 30mm spindle thats long enough to fit into a BB386 frame. The only difference between PF30 and BB386 is the width of the shell which limits which cranksets will fit e.g. a BB30 crank wont fit becuase the spindle isnt long enough. Luckily for you Rotor thought ahead and made their cranksets compatible with pretty much everything on the market.
awesome .. it doesn't have to be a Rotor brand correct as long as it is PF4630 there's a few choices like Wheel Manufacturing BB . Thank you!

PLuKE
Posts: 202
Joined: Sat Aug 16, 2014 5:26 pm
Location: Suffolk, UK

by PLuKE

Just a quick photo out on a short ride last night.

Bond in small
Dura Ace 9100
Zipp 404 FC
Corsa G+ 23c with latex tubs
Deda Superleggera handlbars
Deda Superleggero 110 stem
Fabric race flat saddle.

Image

Post Reply
  • Similar Topics
    Replies
    Views
    Last post