Pictures of Colnagos

Moderator: Moderator Team

Post Reply
coriordan
Posts: 169
Joined: Thu Nov 16, 2017 3:30 pm

by coriordan

Worth bearing in mind that you can assume everything calnago says about Colnago should supercede whatever your reseller says. Your seller is definitely wrong about the rear brake run

stang1
Posts: 135
Joined: Mon Jan 30, 2012 8:57 am

by stang1

Image

Just got to have it :beerchug:

by Weenie


moonoi
Posts: 453
Joined: Sat Nov 21, 2015 3:04 pm
Location: Bangkok, Thailand
Contact:

by moonoi

8 months from ordering and it's finally here, waiting for it to be built, but in the meantime here's a sneak peak of the frame out of the box.

Image

Will be built with DA Di2, CeramicSpeed T45 Threaded Shimano BB, Vibe Aero bars and stem, Selle Italia Flite Flow Kit Carbonio Saddle and a Venn Rev 507 TCD wheelset.

Sent from my SM-G965F using Tapatalk


Last edited by moonoi on Thu Jul 12, 2018 6:34 am, edited 1 time in total.

User avatar
TonyM
Posts: 2578
Joined: Thu Jan 22, 2015 4:11 pm

by TonyM

Nice!

The Pro Vibe aero bars and stem are really nice but the Pro Stealth Evo is even better and will match the Colnago concept better IMHO.

moonoi
Posts: 453
Joined: Sat Nov 21, 2015 3:04 pm
Location: Bangkok, Thailand
Contact:

by moonoi

I mainly went with this bar and stem because it definitely supports the bar end junction box I want to use, and it's cheaper than the stealth

Sent from my SM-G965F using Tapatalk


chunky666
Posts: 112
Joined: Wed Nov 01, 2017 12:01 pm

by chunky666

moonoi wrote:
Thu Jul 12, 2018 6:34 am
8 months from ordering and it's finally here, waiting for it to be built, but in the meantime here's a sneak peak of the frame out of the box.

Image

Will be built with DA Di2, CeramicSpeed T45 Threaded Shimano BB, Vibe Aero bars and stem, Selle Italia Flite Flow Kit Carbonio Saddle and a Venn Rev 507 TCD wheelset.

Sent from my SM-G965F using Tapatalk
FINALLY!!!!!!

Pleased you've finally got it!

Looks lovely in white.

Fingers crossed it'll be built in no time at all and you can actually get out and ride it

User avatar
themidge
Posts: 735
Joined: Fri Jan 13, 2017 4:19 pm
Location: Freeedooom!

by themidge

moonoi wrote:
Thu Jul 12, 2018 6:34 am
Selle Italia Flite Flow Kit Carbonio
They really need to come up with some shorter names for their saddles! Mine is a Selle Italia SLR flow vanox.
That frame looks really nice in white and gold, if a little hard to keep looking clean.
:hello:
Cannondale Supersix 2008 (weight: 7.3kg)
B'twin Triban 540 (in bits)
Vitus "Benotto" 979 (weight: :? )
Pre-War Hetchins Brilliant (weight: it's a touring bike)

KotP
Posts: 32
Joined: Thu Mar 29, 2018 12:31 am

by KotP

moonoi wrote:
Thu Jul 12, 2018 6:34 am
8 months from ordering ....
Your patience has paid off, very nice.
moonoi wrote:
Thu Jul 12, 2018 6:34 am
CeramicSpeed T45 Threaded Shimano BB....
Would you be able to provide the actual weight of the BB, or are you not doing the build yourself?

moonoi
Posts: 453
Joined: Sat Nov 21, 2015 3:04 pm
Location: Bangkok, Thailand
Contact:

by moonoi

My LBS is doing the build, didn't think to weigh the BB when I had it in my possession, sorry.

Sent from my SM-G965F using Tapatalk


rexyi1990
Posts: 82
Joined: Tue Feb 20, 2018 3:05 pm

by rexyi1990

derosa2000 wrote:
Thu Jun 28, 2018 10:30 pm
Image
Peaceful life! Cool

AJS914
Posts: 2121
Joined: Tue Jan 28, 2014 6:52 pm

by AJS914

First C64 to go on a date! :-)

KotP
Posts: 32
Joined: Thu Mar 29, 2018 12:31 am

by KotP

moonoi wrote:
Sat Jul 14, 2018 8:01 am
My LBS is doing the build, didn't think to weigh the BB when I had it in my possession, sorry.

Sent from my SM-G965F using Tapatalk
That's a shame, thanks for the reply. Anyone else have the weight of the ceramicspeed BB?

I've seen a few builds with it but built up by a LBS not a weight weenie :P

nismosr
Posts: 1047
Joined: Mon May 05, 2008 5:15 pm

by nismosr

another new build .. waiting for this one

ImageTNMR1 by nismosr, on Flickr

moonoi
Posts: 453
Joined: Sat Nov 21, 2015 3:04 pm
Location: Bangkok, Thailand
Contact:

by moonoi

Almost done, not happy with the cabling (didn't install the cable stop at the entry point on the headtube), so have asked the LBS to do it properly before I pick it up, also need to sort out the fit, hence the stack of spacers at the moment, and not impressed with the tape job, but I can fix that myself later. Weight is pretty impressive though for a 56s disc aero bike...

Image

Image


Sent from my SM-G965F using Tapatalk



by Weenie


chunky666
Posts: 112
Joined: Wed Nov 01, 2017 12:01 pm

by chunky666

moonoi wrote:
Wed Jul 18, 2018 3:10 am
Almost done, not happy with the cabling (didn't install the cable stop at the entry point on the headtube), so have asked the LBS to do it properly before I pick it up, also need to sort out the fit, hence the stack of spacers at the moment, and not impressed with the tape job, but I can fix that myself later. Weight is pretty impressive though for a 56s disc aero bike...

Image

Image


Sent from my SM-G965F using Tapatalk
Very nice.

The cable stop has pulled out of mine already. Think I need to try and get it 'stuck' with something in there but I'm a bit reluctant to stick anything on the paintwork as I'm having to get the seat post replaced after the lacquer has a small section!

Also nice to see your weight is similar to mine. My wheels come up at 1700g and I'm using a basic saddle and stem combo. Still room to improve it but all in all not too bad

Post Reply
  • Similar Topics
    Replies
    Views
    Last post