Cannondale Hollowgram carbon wheels (Disc brake version) - weight and details
Moderator: robbosmans
-
- Posts: 120
- Joined: Sat Jul 10, 2010 6:38 am
Lets get a thread going about the disc brake version of the Cannondale Hollowgram wheels that come stock with lots of the SS (Non-HM and HM bikes)
Detailed info:
Rims: Cannondale HollowGram Si Disc Carbon Clincher, 19mm inner, 35mm deep, tubeless ready
Hubs: Cannondale HollowGram Si Disc, straight-pull, SRAM Maxle Stealth 12x100 thru-axle front 24h, 135x9 QR rear, 28h, Center-lock
Spokes: DT Aerolite bladed spokes 24 front (radial/2cross), 28 rear (2cross) - Alloy nipples
OEM Wheelset weight: 1446g
OEM Inner Tire: Vittoria Corsa G+ 25mm: 259g
OEM Inner Tube: Maxxis 60mm Valve: ~100-120g
OEM Tire Strip: Unknown
More details from https://www.bikebug.com/cannondale-holl ... 05084.html
35mm deep, full carbon rim. Long sheet carbon construction. Disc-specific.
Rim width: 19mm internal /25mm external.
Hubs: HollowGram custom, 39t/3-pawl freehub for fast engagement, sealed precision bearings.
Detailed info:
Rims: Cannondale HollowGram Si Disc Carbon Clincher, 19mm inner, 35mm deep, tubeless ready
Hubs: Cannondale HollowGram Si Disc, straight-pull, SRAM Maxle Stealth 12x100 thru-axle front 24h, 135x9 QR rear, 28h, Center-lock
Spokes: DT Aerolite bladed spokes 24 front (radial/2cross), 28 rear (2cross) - Alloy nipples
OEM Wheelset weight: 1446g
OEM Inner Tire: Vittoria Corsa G+ 25mm: 259g
OEM Inner Tube: Maxxis 60mm Valve: ~100-120g
OEM Tire Strip: Unknown
More details from https://www.bikebug.com/cannondale-holl ... 05084.html
35mm deep, full carbon rim. Long sheet carbon construction. Disc-specific.
Rim width: 19mm internal /25mm external.
Hubs: HollowGram custom, 39t/3-pawl freehub for fast engagement, sealed precision bearings.
2018 Supersix Evo Hi-Mod Disc Dura-Ace
Conti SS + Gp5000
3t Ernova Team
Garmin 520 Plus
Look Keo Blade 2 Carbon Ti
15lb 15oz
Conti SS + Gp5000
3t Ernova Team
Garmin 520 Plus
Look Keo Blade 2 Carbon Ti
15lb 15oz
-
- Posts: 120
- Joined: Sat Jul 10, 2010 6:38 am
Front 12x100 Thru axle weight: 56.3g
Rear 135 QR weight: 64.4g (why so heavy?)
Rear 135 QR weight: 64.4g (why so heavy?)
2018 Supersix Evo Hi-Mod Disc Dura-Ace
Conti SS + Gp5000
3t Ernova Team
Garmin 520 Plus
Look Keo Blade 2 Carbon Ti
15lb 15oz
Conti SS + Gp5000
3t Ernova Team
Garmin 520 Plus
Look Keo Blade 2 Carbon Ti
15lb 15oz
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 120
- Joined: Sat Jul 10, 2010 6:38 am
does anyone know if these wheels have cartridge bearings or are they cup and cone?
2018 Supersix Evo Hi-Mod Disc Dura-Ace
Conti SS + Gp5000
3t Ernova Team
Garmin 520 Plus
Look Keo Blade 2 Carbon Ti
15lb 15oz
Conti SS + Gp5000
3t Ernova Team
Garmin 520 Plus
Look Keo Blade 2 Carbon Ti
15lb 15oz
I just got a pair of the 35s on a new bike.
The front wheel didn't feel particularly light but that might be the weight of the disc rotor.
I need to check with the shop as I think there are some bits missing - but there were no valves to make them tubeless.
Anyone know if they should have come with the bike or whether i just need to source some third party valves?
The front wheel didn't feel particularly light but that might be the weight of the disc rotor.
I need to check with the shop as I think there are some bits missing - but there were no valves to make them tubeless.
Anyone know if they should have come with the bike or whether i just need to source some third party valves?
I've not measured them but if I compared the total bike weight compared with my farsport feeders (1250) and adjusted for different tyres they're around 1550 - 1600 including rim tape I would say. I will also add they're quite a tricky rim to get tyres on as well!
Worth also bearing in mind there's a non-sl knot 45 and that they changed the hubs from dtswiss to formula hubs for the 2021 models from what I can tell so this may effect things too.
-
- Posts: 250
- Joined: Tue Oct 08, 2019 10:15 am
They should come with the tubeless valves, they were in the box of miscellaneous bits (extra spacers etc) for mine.JimboP wrote: ↑Fri Mar 05, 2021 11:27 pmI just got a pair of the 35s on a new bike.
The front wheel didn't feel particularly light but that might be the weight of the disc rotor.
I need to check with the shop as I think there are some bits missing - but there were no valves to make them tubeless.
Anyone know if they should have come with the bike or whether i just need to source some third party valves?
Cannondale SSEvo3 'Atticus' - 7.2kg
viewtopic.php?f=10&t=161634
Cannondale Systemsix ’Dante’ - 7.7kg
viewtopic.php?f=10&t=167144
viewtopic.php?f=10&t=161634
Cannondale Systemsix ’Dante’ - 7.7kg
viewtopic.php?f=10&t=167144
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com