New to disc brakes and a bit confused with the compatibility between through axles and framesets. I'm considering Cervelo R5 disc which comes with proprietary 12mm t/a.'s front and rear. Wondering if or how the frame accepts larger diameter through axles?
I understand wheelset brands use different size t/a's, but I'm not sure if the frame is compatible with other size through axles? For example, if I'm using the original 12mm axles and decide to use different wheels requiring a 15mm axle, would I just need an adapter for the hub/wheelset and continue to use the same 12mm axles?
I hope this makes sense?
Thanks in advance
Through axles question
Moderator: robbosmans
-
- Posts: 12570
- Joined: Mon Jul 24, 2017 12:02 pm
No, you would only ever use wheels with 12mm endcaps installed. 15mm TA is for MTB and some chunky early gravel bikes.
Wheels/hubs are otherwise TA agnostic. If the 12mm endcaps are installed on the hub, then that wheel can be used with any bike that uses 12x100 / 12x142mm TA.
Wheels/hubs are otherwise TA agnostic. If the 12mm endcaps are installed on the hub, then that wheel can be used with any bike that uses 12x100 / 12x142mm TA.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com