Zipp 303 Q
Posted: Tue Feb 26, 2019 4:30 pm
anyone running the 303 firecrest tubeless disc? Looking to know (1) 'real' weight w/out tape and (2) if anyone runs 25mm tire. Inner diameter seems wide for 25 tire?
Forum
https://weightweenies.starbike.com/forum/
https://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=155802
rides4beer wrote: ↑Tue Feb 26, 2019 4:51 pmCan't speak for these wheels specifically, but I plan to run 25mm GP5000s on 21mm internal rims, should be a perfect fit, right around 28mm measured (hopefully a lil under, we'll see).
Light bicycle 46mm, they're 21mm internal, 28mm external. Just shipped out, should have them in the next couple of weeks.
I have the disc version of the U-shaped rims from them. Special ordered the 12k weave which looks fantastic in person. Had my mechanic build them up with CX-rays and a Carbon-Ti hub in front (and SCS spaced hub in back because "Specialized"). I've been on them since late October I think. They have been nothing short of fantastic, and I always get people asking me about them.rides4beer wrote: ↑Tue Feb 26, 2019 7:49 pmLight bicycle 46mm, they're 21mm internal, 28mm external. Just shipped out, should have them in the next couple of weeks.
https://www.lightbicycle.com/700C-V-sha ... tible.html
The page says disc, but they're also available for rim brakes, which is what I ordered.
Looks great! I went back and forth on the 12k, I really like it, but landed on the UD. Was gonna go glossy, but their glossy is really glossy. So I went matte and I'm gonna hit it with a bit of polish to bring it to a more satin sheen. I've read nothing but good things about them, and the communication during the ordering process was fantastic, as you can tell, I changed my mind several times!youjettisonme wrote: ↑Tue Feb 26, 2019 8:57 pmI have the disc version of the U-shaped rims from them. Special ordered the 12k weave which looks fantastic in person. Had my mechanic build them up with CX-rays and a Carbon-Ti hub in front (and SCS spaced hub in back because "Specialized"). I've been on them since late October I think. They have been nothing short of fantastic, and I always get people asking me about them.
Also, I'm running them tubeless with Cinturato 28s. I didn't notice until I went to install that the internal width which measured over 21 mm is actually beyond the spec recommendations of the Cintruatos. Right on the tire it says not to exceed 20mm width. Decided to ignore their advice, mounted them anyway, and they've been perfect although it took a couple days for the sealant to work 100%.
Here are the wheels prior to going tubeless. Turned my Diverge into something I can take on fast group rides. I enjoy riding it at least as much as my Scott Addict.