Schmolke TLO 45 vs Bora One 50?

Everything about building wheels, glueing tubs, etc.
Lafolie
Posts: 700
Joined: Tue Sep 08, 2009 10:12 pm

by Lafolie

Noctiluxx wrote:
Fri Feb 15, 2019 5:56 pm
The Schmolke for your Instagram account, the Boras for your rides.
haha :-)

User avatar
wheelsONfire
Posts: 2950
Joined: Mon Jul 07, 2014 8:15 am
Location: NorthEU

by wheelsONfire

maxice wrote:
Fri Feb 15, 2019 2:11 pm
Looking for a wheelset (Clincher) for a Colnago C64 disc build. Its spec'd with Campag 11 EPS disc so just the wheelset to confirm.

They are both about the same price. The Schmolke is c250g lighter with CarbonTI hubs and are slightly wider by 0.6mm, not sure if they are more aero or not?

For a 67kg rider, mainly undulating roads in and around Kent/Essex/Surrey at c30-50kph on the flats (and way way slower on the climbs) what wheel would you recommend?

The Boras would make it all match but its a heavier wheel and I'm not 100% keen on the look of the G3 lacing on both wheels

....would I even notice the extra weight?
You're looking to buy either Bora or Schmolke?
You have none of them now?

Heck, you could use other hubs to, why not the latest DT Swiss 180 hubs and Schmolke rims?

From what i have been told, it's true. The width of the rim should be wider.
I talked directlt to Eastons technical department. Aero 55 rims are very close to 28mm over brack track and the leading width is close to 30mm.
Tires with best aero-benefit were 22-23mm, even with such a wide rim.
So i would go for the widest rim i could find if aero was "the deal".
However, i'm not convinced the latest 19mm internal width rims are such a good idea if the frame and fork itself, handles maximum 25mm width of the tires.

A good option should also be Tune Schwarzbrenner 45C
Great hubs, very light and not expensive compared to the other two.
Bikes:

Ax Lightness Vial EVO Race (2018.12.21)
viewtopic.php?f=10&t=156137
Paduano Racing Fidia (kind of shelved)
Open *UP* (2016.04.14)


Ex bike; Vial EVO D

by Weenie


maxice
Posts: 84
Joined: Wed Aug 15, 2018 11:05 pm

by maxice

wheelsONfire wrote:
Wed Aug 14, 2019 1:39 pm
maxice wrote:
Fri Feb 15, 2019 2:11 pm
Looking for a wheelset (Clincher) for a Colnago C64 disc build. Its spec'd with Campag 11 EPS disc so just the wheelset to confirm.

They are both about the same price. The Schmolke is c250g lighter with CarbonTI hubs and are slightly wider by 0.6mm, not sure if they are more aero or not?

For a 67kg rider, mainly undulating roads in and around Kent/Essex/Surrey at c30-50kph on the flats (and way way slower on the climbs) what wheel would you recommend?

The Boras would make it all match but its a heavier wheel and I'm not 100% keen on the look of the G3 lacing on both wheels

....would I even notice the extra weight?
You're looking to buy either Bora or Schmolke?
You have none of them now?

Heck, you could use other hubs to, why not the latest DT Swiss 180 hubs and Schmolke rims?

From what i have been told, it's true. The width of the rim should be wider.
I talked directlt to Eastons technical department. Aero 55 rims are very close to 28mm over brack track and the leading width is close to 30mm.
Tires with best aero-benefit were 22-23mm, even with such a wide rim.
So i would go for the widest rim i could find if aero was "the deal".
However, i'm not convinced the latest 19mm internal width rims are such a good idea if the frame and fork itself, handles maximum 25mm width of the tires.

A good option should also be Tune Schwarzbrenner 45C
Great hubs, very light and not expensive compared to the other two.
I ended up with the Boras to have everything matching

Post Reply
  • Similar Topics
    Replies
    Views
    Last post