Spokes from Lightbicycle?
Moderator: robbosmans
Has anyone ordered spokes alongside rims when ordering from Lightbicycle. I was intending to source them separately but they are offering to supply them with my rims. Do they get the lengths correct and are their prices reasonable?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I got the Pillar 1420 spokes (along with a set of rims) from them once because I couldn't find a US source for that brand of spoke. These are a Chinese copy of CX-Rays. The lengths were as I specified but I've had way more of those spokes break than CX-Rays or Aerolites so I considered it a failed experiment.
I live in China and I heard some online wheelbuilders prefer cnspoke mac aero424 over the pillar 1420.
Also it might be different with straight pull compared to J-bend. Straight is supposed to be a bit more resiliant at the head. I use J-bend 424s and haven't had one break. Had several alloy nipples fail because of short spoke lengths but that was my own fault. I was always able to reuse the spoke after the nipple broke. So I gotta say I'm impressed with these spokes. (As with Pillar they are made in Taiwan.)
Now a year later I've taken time to correct the spoke lengths with new 424 s and couldn't be happier. (I didn't need a whole new set of spokes, just 8+12 because I swapped spokes around. rDS to fr and fr to rNDS) I'm running 20/24h and I weigh around 65kg.
/a
Also it might be different with straight pull compared to J-bend. Straight is supposed to be a bit more resiliant at the head. I use J-bend 424s and haven't had one break. Had several alloy nipples fail because of short spoke lengths but that was my own fault. I was always able to reuse the spoke after the nipple broke. So I gotta say I'm impressed with these spokes. (As with Pillar they are made in Taiwan.)
Now a year later I've taken time to correct the spoke lengths with new 424 s and couldn't be happier. (I didn't need a whole new set of spokes, just 8+12 because I swapped spokes around. rDS to fr and fr to rNDS) I'm running 20/24h and I weigh around 65kg.
/a
I just built a wheel using Pillar 1420, most Chinese suppliers have PBA 1420 which are slightly different from PSR x-tra 1420. I read on mtbr that the combination of Pillar spokes and nipples leaves little room for length errors. See this http://forums.mtbr.com/wheels-tires/my- ... 58365.html
Mac424 are a little more affordable than Pillar 1420
Mac424 are a little more affordable than Pillar 1420