Fulcrum freehub conversion

Everything about building wheels, glueing tubs, etc.
Post Reply
Tricky1
Posts: 91
Joined: Mon Jul 18, 2011 7:25 am

by Tricky1

Considering a used 2013 Fulcrum Red Wind H50 XLR CULT wheelset. The rear wheel has a Shimano freehub, and I'm running Campy. My Fulcrum racing 3 wheelset has a Campy freehub, but not sure it's compatible on the Red Wind? Thanks in advance!

by Weenie


User avatar
bikerjulio
Posts: 1901
Joined: Fri Dec 11, 2009 10:38 pm
Location: Welland, Ontario

by bikerjulio

I believe that these both use a version of Campagnolo's OS axle cup and cone hubs (ie the good ones).

There was a change to the axle around 2007. If both hubs are post-2007 then you should be fine.

Remember that the freehub retaining nut is reverse threaded. Then it's easy to swap.
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM

Tricky1
Posts: 91
Joined: Mon Jul 18, 2011 7:25 am

by Tricky1

Thanks Julio!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post