Making the transition to tubulars
Moderator: robbosmans
Forum rules
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Generally speaking, the intention of the 'perfect' glue job is to create the best possible bond between the rim bed and the basetape. Accordingly, the better the glue job, the more difficult the tire will be to remove. If you can easily dismount the tire, it stands to reason that such a glue job will also result in a greater likelihood for the tire to become dismounted unintentionally. I would always personally recommend that the tire be glued with its retention whilst riding as the overriding consideration.
I think I might have to give tape a go...I glued my tyres on so well it was difficult to say the least. Without the tyre levers I would have been there even longer.KCookie wrote: ↑Thu Mar 29, 2018 9:34 pmUse tape and can have a tyre changed in minutes and im a novice. It's so easy and clean. Carry a tufo tyre, nice a light no pre stretching and you'll be on your way in 5 mins with clean hands.Wingnut wrote: ↑Thu Mar 29, 2018 1:06 pmWell stuff that! I've been training on tubulars for the last 7 months and got my first puncture today, took me over half an hour to peel the old tyre off and then a nightmare to stretch the spare pre glued tyre on.
I used to race on tubulars over 20 years ago but training on them...f#@&k that! I'm back to clinchers for my training wheels from now on...
Just another soon to be tubular newbie checking in.
My question is more to do with tyre sizing.
In Clinchers.. the wider the rims the wider the spread (in most cases) so my 26mm Specialised turbo cotton on Roval CLX50 measures in at nearly 30mm wide (caliper).
The nice thing about this combo is that the profiles align almost perfectly.
How does tubulars present itself on narrow/wider rims? As there is no open ended part to spread.. I would expect tubs to have some spread on wider rims but not too much?
Using a wider tyre than the rim(narrow) would present a mushroom shape as well?
For instance, on Bora 35s (24.2mm width) is this better paired with (profile wise) 25mm Veloflex Roubaix or 27mm Vlaanderen . I know there are more to tyres than profiles matching the rims.
Does the equation change when going to a rim that are wider?
Thanks for answering questions from a tubbie (tubular newbie).
My question is more to do with tyre sizing.
In Clinchers.. the wider the rims the wider the spread (in most cases) so my 26mm Specialised turbo cotton on Roval CLX50 measures in at nearly 30mm wide (caliper).
The nice thing about this combo is that the profiles align almost perfectly.
How does tubulars present itself on narrow/wider rims? As there is no open ended part to spread.. I would expect tubs to have some spread on wider rims but not too much?
Using a wider tyre than the rim(narrow) would present a mushroom shape as well?
For instance, on Bora 35s (24.2mm width) is this better paired with (profile wise) 25mm Veloflex Roubaix or 27mm Vlaanderen . I know there are more to tyres than profiles matching the rims.
Does the equation change when going to a rim that are wider?
Thanks for answering questions from a tubbie (tubular newbie).
it's really a matter of how the rim bed radius matches the tub
taking extreme cases...
- puting a large diameter tub on a small radius rim bed (typically on a narrow rim) will mean the basetap will make best contact at the edges of the rim bed, but the centre may not stick so well
- the other way around, a narrow tub on a large radius rim bed will make good contact in the centre but the edges make not even touch the rim bed, this is worse than the first case i think
neither is good, you want a good match for strong adhesion
the diameter of a tub isn't really affected, it is a tube, the internal pressure keeps it circular
on the boras personally i'd go 25mm for road, afaik a tyre bulging out beyond the rim is not good aerodynamically
taking extreme cases...
- puting a large diameter tub on a small radius rim bed (typically on a narrow rim) will mean the basetap will make best contact at the edges of the rim bed, but the centre may not stick so well
- the other way around, a narrow tub on a large radius rim bed will make good contact in the centre but the edges make not even touch the rim bed, this is worse than the first case i think
neither is good, you want a good match for strong adhesion
the diameter of a tub isn't really affected, it is a tube, the internal pressure keeps it circular
on the boras personally i'd go 25mm for road, afaik a tyre bulging out beyond the rim is not good aerodynamically
What kind/ brand of tape do you use?KCookie wrote:Once you try it i dont think you'll go back. I've got full confidence in tape. Never had an issue yet and on $7k rims to.
Sent from my SM-G930F using Tapatalk
Sent from my iPhone using Tapatalk
Hey addictR1.addictR1 wrote:What kind/ brand of tape do you use?KCookie wrote:Once you try it i dont think you'll go back. I've got full confidence in tape. Never had an issue yet and on $7k rims to.
Sent from my SM-G930F using Tapatalk
Sent from my iPhone using Tapatalk
This is the one I use.
Sent from my SM-G930F using Tapatalk
fingers got itchy and accidently clicked on buy it now... so now i have a new set of DA C40 inbound. here are the tubs i have now:
Veloflex SPrinter 22mm (currently on Aero 72)
Veloflex Carbon 23mm x 1
Aero 72 is 26.2mm wide while the C40 is 28mm wide
the 22mm might be too narrow on the C40... so probably need to buy new tubs.
question is.. can i use the carbon 23mm for front and get a 25mm Arenberg for the rear? was thinking to get the Roubaix but may be odd with black side walls front and tan in the back.
Never had a rim that wide before... so just wanna make sure it's well protected.
i'm also open to trying other tubs as well.. thanks.
Veloflex SPrinter 22mm (currently on Aero 72)
Veloflex Carbon 23mm x 1
Aero 72 is 26.2mm wide while the C40 is 28mm wide
the 22mm might be too narrow on the C40... so probably need to buy new tubs.
question is.. can i use the carbon 23mm for front and get a 25mm Arenberg for the rear? was thinking to get the Roubaix but may be odd with black side walls front and tan in the back.
Never had a rim that wide before... so just wanna make sure it's well protected.
i'm also open to trying other tubs as well.. thanks.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Are these measurements at the brake track?
I run Carbon-Arenberg on 303/404 combo.
303 measures 28mm and 26.5mm at the brake track.
404 26.5mm and 25.3mm respectively.
I had to use Carbon cos my previous frame's fork was too tight for 25mm. And because it is still in a very good shape, I decided not to change it.
If 28mm is at the brake track I would go for 25mm tubs.
For 26.5mm (303) 23mm is the narrowest tub I'd consider. I had to put 22mm (Extreme) couple of times on this rim and it looked weird, too narrow.
I run Carbon-Arenberg on 303/404 combo.
303 measures 28mm and 26.5mm at the brake track.
404 26.5mm and 25.3mm respectively.
I had to use Carbon cos my previous frame's fork was too tight for 25mm. And because it is still in a very good shape, I decided not to change it.
If 28mm is at the brake track I would go for 25mm tubs.
For 26.5mm (303) 23mm is the narrowest tub I'd consider. I had to put 22mm (Extreme) couple of times on this rim and it looked weird, too narrow.