Page 2 of 157

Re: Open mold wide profile carbon wheels

Posted: Wed Jun 13, 2012 3:44 pm
by odin99
tharmor wrote:I heard back from BEV and it was a bit disappointing. First, they were assuming that I was a business looking to resell, which of course, I'm not. Second, there is a minimum purchase order of 50 pieces (not sure if that's complete sets or not). However, just out of curiousity's sake I asked if I met the 50 piece minimum what the cost would be, and on the 80mm tubular, it was $178 USD.

Not bad at all. Now I just wish they had a distributor (which they don't - I asked that too).



group buy?

Re: Open mold wide profile carbon wheels

Posted: Wed Jun 13, 2012 3:44 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Open mold wide profile carbon wheels

Posted: Wed Jun 13, 2012 6:53 pm
by ms6073
tharmor wrote:Second, there is a minimum purchase order of 50 pieces (not sure if that's complete sets or not).
Take what Real Design mentioned and run with it. For many of these resellers, the MOQ can be overcome by indicating that 'your' company will first need to arrange for the purchase of some sample pieces for testing wheel builds with the hubs you plan to use.

Re: Open mold wide profile carbon wheels

Posted: Wed Jun 13, 2012 7:04 pm
by tharmor
ms6073 wrote:
tharmor wrote:Second, there is a minimum purchase order of 50 pieces (not sure if that's complete sets or not).
Take what Real Design mentioned and run with it. For many of these resellers, the MOQ can be overcome by indicating that 'your' company will first need to arrange for the purchase of some sample pieces for testing wheel builds with the hubs you plan to use.



Just read what "Evelyn" wrote to me back and forth and try to make sense of it all - for reference, th emails sort from most recent to the original ::



Sorry in this case it is not possible sorry.


We can accept one sample order before production.  But you need to give me your company detail first.
 
We charge for sample and shipping cost and bank charge.  Please kindly noted.
 
Give me also the shipping address so I can check and let you know the total charge for the sample.  Thank you.
 
 
Best Regards,
 
Evelyn

Dear Travis:

How are you?  Hope all is well.
 
Sorry we do not have distributor.
 
BWR-131: without logo, OEM package FOB Taiwan US$ 178.00/each rim
Min. Q'ty request per order: 50pcs
 
Our payment term is:
All sample orders: 100% T/T upon confirming the order.
First production order: 100% T/T upon confirming the order.
Second production order: 50% T/T upon confirming the order, balance 50% T/T 2 weeks before shipment.
Third production order & on: 30% T/T upon confirming the order, balance 70% T/T 2 weeks before shipment.
 
Please kindly check above information and kindly let us know if you have any questions or if you need anything else?  Thank you.
 
Hope to hear from you soon and have a nice day.
 
 
Best Regards,
 
Evelyn

Dear Travis:

Thank you for your quick reply.
 
Our first order min. is 50pcs and than after first order the min. is 100pcs per item.  Please kindly noted.
 
Let me know if you have any more questions or if you need anything else?  Thank you.
 
Have a nice day and keep in touch.
 
 
Best Regards,
 
Evelyn


Dear Travis:

Thank you for your e-mail and inquiry.
 
For price detail, please kindly send us below information.  Thank you.
Your full company name?
Your full company address?
Your company website?
Your company phone, fax and e-mail address?
Your company contact person?
 
Thank you.
 
Hope to hear from you soon and have a nice day.
 
 
Best Regards,
 
Evelyn

Re: Open mold wide profile carbon wheels

Posted: Thu Jun 14, 2012 2:59 am
by eric
FarSports has some wider "CX" rims. They will sell to individuals.

Re: Open mold wide profile carbon wheels

Posted: Thu Jun 14, 2012 3:35 am
by Arky
Does anyone have a direct link to the "cx" rims? Finding a specific rim on that site is very difficult.

Re: Open mold wide profile carbon wheels

Posted: Thu Jun 14, 2012 4:44 am
by Imaking20

Re: Open mold wide profile carbon wheels

Posted: Thu Jun 14, 2012 6:31 am
by CAFERACER
tharmor wrote:
ms6073 wrote:
tharmor wrote:Second, there is a minimum purchase order of 50 pieces (not sure if that's complete sets or not).
Take what Real Design mentioned and run with it. For many of these resellers, the MOQ can be overcome by indicating that 'your' company will first need to arrange for the purchase of some sample pieces for testing wheel builds with the hubs you plan to use.



Just read what "Evelyn" wrote to me back and forth and try to make sense of it all - for reference, th emails sort from most recent to the original ::



[i]Sorry in this case it is not possible sorry.

----- Original Message -----
From: Travis Harmor
To: evelyn
Sent: Wednesday, June 13, 2012 10:06 PM
Subject: Re: BWR-131 (80mm Tubular)

I'm convinced you do not understand my situation. I am ONLY interested in buying two rims for my personal bicycle. I would NOT be interested in buying 50. 

If there is a way for me to place an order for just 2 BWR-131 at $178 + shipping then please let me know. Otherwise, I would have to look elsewhere. 

For reference, my address is ::

Edited out the home address

Regards,

Travis C. Harmor


Man you were rude in that e-mail thread. It is similar to when travelling abroad seeing loud Americans ask for something in English then get annoyed when they aren't understood. Their usual response is to say the original request louder and slower.

Re: Open mold wide profile carbon wheels

Posted: Thu Jun 14, 2012 10:10 am
by Phill P
Do farsports have their own CF facilities or are they a trading house again?

I see they have a chinerallo frame listed, but most of the other road frames look more uniquely inspired.

How does 390g for a 50x23 tubular stack up? I'm guessing a little heavier since it is classed as a CX rim. The weight seems good to me, 50mm deep and still lighter than 99% of Al clinchers.

Re: Open mold wide profile carbon wheels

Posted: Fri Jun 15, 2012 12:14 am
by tharmor
Man you were rude in that e-mail thread. It is similar to when travelling abroad seeing loud Americans ask for something in English then get annoyed when they aren't understood. Their usual response is to say the original request louder and slower.



I'll admit that I got rude with her. I have to admit that. Nevertheless, our emails were more like chats in the sense that we were going back and forth within minutes of one another. After the third time she requested my company name, I wanted to leave it at that.

The last thing I need to be labeled is a loud American. Forgive me if I came across that way.

Re: Open mold wide profile carbon wheels

Posted: Wed Jan 09, 2013 2:05 pm
by Bregne
Any news on this?

Re: Open mold wide profile carbon wheels

Posted: Wed Jan 09, 2013 2:37 pm
by LouisN
Anybody knows where these guys source their new 2013 "wide" rims ?
Looks a lot like copies of some known brands... :wink:

http://www.boydcycling.com/2013-product-revamp/

Louis :)

Re: Open mold wide profile carbon wheels

Posted: Wed Jan 09, 2013 3:04 pm
by NWSAlpine
Boyd switched manufacturers for his new line. Not sure who makes them but I would image he has a good relationship with his manufacturer and might have an "exclusive" deal for now. I haven't seen anything like this from the open mold guys yet. Very nice and quality built wheels.

Re: Open mold wide profile carbon wheels

Posted: Wed Jan 09, 2013 3:08 pm
by HillRPete
This side of the pond, UK-based Wheelsmith has 23mm wide tubulars and 24mm clinchers with Gigantex rims. Selling full builds only.

Re: Open mold wide profile carbon wheels

Posted: Wed Jan 09, 2013 4:16 pm
by prendrefeu
*cough*

Coincidentally, FarSports announced last night their newest line of wheels.
You guessed it: wide, "U shaped profile"

Kinda funny that Boyd comes out with them at the same time.
I'd still rather buy FarSports.

Re: Open mold wide profile carbon wheels

Posted: Wed Jan 09, 2013 4:16 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Open mold wide profile carbon wheels

Posted: Wed Jan 09, 2013 4:25 pm
by Imaking20
Where was this announcement?