The CAAD Build Thread...

Moderator: Moderator Team

Post Reply
Posts: 395
Joined: Sat Mar 16, 2013 9:21 am

by Fiery

CamMancuso wrote:" onclick=";return false;" onclick=";return false;

Look at the geo chart above, 2006 Six13 was offered in a 53cm as a frameset only which is how I purchased it. The 53 was slightly large (standover, seat tube..) The top tube was about right as I have a long reach, I had a 110 stem on there and just about slammed down

I stand corrected.

So, the geometry can be compared directly to the CAAD10. You had a decent length stem for that size and you didn't need more drop either, it seems. If the only problem was standover, that's a lot like toe overlap - not really a problem, but you do have to think about it. The 50 would net you a bit over 2cm of standover clearance at the expense of adding 15mm of spacers. Reach doesn't change much; taking into account the steeper seat tube angle, you'd need to go to a 120mm stem, no more. The 52 would give you almost 1cm of standover as well as 1cm of spacers, and you could keep the 110mm stem or go to 120 depending on what feels better.
Last edited by Fiery on Mon Oct 07, 2013 8:00 pm, edited 1 time in total.

Posts: 529
Joined: Thu Dec 22, 2011 12:39 pm
Location: DC

by plpete

bringing a bit of old school back. CAAD8 with original Force shifters and crank and newer derailleurs.


by Weenie

User avatar
Posts: 108
Joined: Mon Nov 07, 2011 8:02 pm
Location: England

by theosaurus

love that caad 8
although I wouldn't quite call it old school just yet
yes, but how much does it weigh?

Posts: 220
Joined: Sun Jul 30, 2006 3:05 am
Location: Georgia

by 12x23

Agree. Those raw-hibrite 8's, Six/13's, and System 6's will never grow old.

Posts: 35
Joined: Thu Feb 04, 2010 7:58 pm
Location: Spain

by Farnit

Size 52, complete 105, RS10 wheelset, FSA alu cockpit and SLK cranks 8'3kg
CIMG1664 - copia.JPG

Posts: 291
Joined: Fri Jan 03, 2014 7:37 am

by dogg

that 7 is just lovely. frame bar combo and saddle really pull it all together

User avatar
Posts: 6775
Joined: Sun Jun 18, 2006 10:29 am
Location: Athens, Greece

by kgt


User avatar
Posts: 844
Joined: Sun Dec 12, 2004 2:49 pm
Location: Mårslet, Denmark

by Anders

My 2012 CAAD10 slightly rebuild :D It's a size 60 at 6,96 kg.


Frame: Cannondale CAAD10 size 60 drilled for Di2 1330g
Fork: Cannondale Super Six Evo custom painted 295g
Stem: 3T ARX Team 110mm 115g
Handlebar: 3T Ergonova Team Stealth 44cm 215g
Bartape: Specialized Roubaix 75g
Stem cap: Absolute Black 3g
Headset: Cannondale with STS cover 70g
Garmin bracket: Tilquist
Saddle: Specialized Romin Pro 163g
Seatpost: Enve zero setback 27.2/250 130g
RD: Shimano Ultegra Di2 250g
FD: Shimano Ultegra Di2 160g
Levers: Shimano Ultegra Di2 313g
Battery: Shimano 58g
Cassette: Shimano Dura Ace 7900 12-25 181g
Chain: Shimano 7900 250g
Brakes: TRP R970SL with Zipp pads 212g
Brake cables: Alligator I-link
Crankset: Cannondale Hollowgram SL 175mm with 53/39 Spidering 621g
Pedals: Speedplay Zero with Ward titanium spindles 156g
Wheelset: Zipp 303 Firecrest Carbon Clincher 1493g
QR: Zipp ti 65g
Tyres: Continental Attack/Force 350g
Tubes: Michelin latex 150g
Bottlecages: Tune Universal 45g
Last edited by Anders on Wed Feb 12, 2014 10:27 pm, edited 5 times in total.

Posts: 357
Joined: Mon Mar 28, 2011 6:46 pm
Location: Amsterdam

by TimmS

What's new? Brake cable hanging lose? :wink:

(it's the wheels right?)

Posts: 11
Joined: Tue Jan 28, 2014 9:14 pm

by ollander

caad 10/4 2014
size 52
full carbon fork
ultegra shifters 6800
ultegra brakes 6800
ultegra front and rear derailleur 6800
stem pro vibe7s 110/minus graphics
handlebar pro vibe 7s 42cc/ minus graphics
seatpost dale c2
saddle fizik arione R7
crankset FSA SLk light compact
pedals ultegra 6800 carbon
tyres vittoria evo sc
wheels mavic open pro
hubs miche primato
spokes sapim x-ray flat/front round/rear
cassette ultegra6800 11/25
barwrap fizik
k-edge chain catcher
K-edge garmin mount pro
weight 7,7kg
greetz Jan 8)
Last edited by ollander on Wed Jan 29, 2014 4:05 pm, edited 6 times in total.

User avatar
Posts: 650
Joined: Mon May 15, 2006 12:19 am
Location: Vancouver, BC, Canada.

by hmai18


I want that BBQ frame and Ultegra 11, but can't justify upgrading from my existing CAAD10 Red/Force mix for such minimal gain. Seriously though, nice whip.

Posts: 11
Joined: Tue Jan 28, 2014 9:14 pm

by ollander

how to put a big picture in the reply?
greetz Jan 8)
Last edited by ollander on Wed Jan 29, 2014 4:10 pm, edited 4 times in total.

Posts: 736
Joined: Sun Jun 17, 2007 6:56 pm

by drainyoo

A bunch of gorgeous bikes in here. Can't wait to finish mine so that I can post it. Here is the build thread if you want to follow the progress:


User avatar
Posts: 1172
Joined: Mon Jan 10, 2005 10:47 am
Location: somewere floating between here and the other side

by michel2

12x23 wrote:Agree. Those raw-hibrite 8's, Six/13's, and System 6's will never grow old.

More like a timeless classic !(;

by Weenie

Post Reply
  • Similar Topics
    Last post