Moots Vamoots RSL - 6140g

[GT56]

I think we have similar taste. I spent less, and get more, 6.5kg.

I'm using FMB PR 25, cotton. Ride is more supple than Conti Competition but seems to wear faster. Also, I can notice some irregular spots (I.e. Runout) when I spin the wheel. I guess it is probably a result of handmade. It doesn't seems to suffer road cuts as much as the conti.

cool, what is the headtube length and stack-height ?

txs

[teocl]

cool, what is the headtube length and stack-height ?

txs

It's a stock size 54 with a 5mm spacer.

[elfuinha]

I think we have similar taste. I spent less, and get more, 6.5kg.

I'm using FMB PR 25, cotton. Ride is more supple than Conti Competition but seems to wear faster. Also, I can notice some irregular spots (I.e. Runout) when I spin the wheel. I guess it is probably a result of handmade. It doesn't seems to suffer road cuts as much as the conti.

Looks really good, but you still have to loose 320g to get "more = equal" , and when you have a bike that is already very light with a titanium frame (that weight's 1250g), you will spend more to loose those 320g without lowering the weight limit of the bike 100/110kg.

because below this "weight limit of the bike 100/110kg", it's easy to loose just with the wheels, with a sub 1kg wheels and a 22mm sprint tubular but I wouldn't ride that bike.

Best regards
Very good taste in your bike.

[elfuinha]

new parts have arrived:

the combo will be like my last one Calfee like, with UD wrapped joint.

Ax-lightness 4200 42cm
MCFK Stem 110mm
still have to get the old Kedge Garmin Mount.





Expect to remove between 80g, from the present combo that I have to new one.

[elfuinha]

I'm using FMB PR 25, cotton. Ride is more supple than Conti Competition but seems to wear faster. Also, I can notice some irregular spots (I.e. Runout) when I spin the wheel. I guess it is probably a result of handmade. It doesn't seems to suffer road cuts as much as the conti.

with FMB Paris Roubaix 25 Silk, is the same some irregular spots but nothing special, my last tubulars the Schwable one 24, at least the rear one had lateral deviation at the valve joint.
this is the biggest tubular I can fit in the fork, 1mm clearance, is what I have.

[steff]

new parts have arrived:

the combo will be like my last one Calfee like, with UD wrapped joint.

Ax-lightness 4200 42cm
MCFK Stem 110mm
still have to get the old Kedge Garmin Mount.



Expect to remove between 80g, from the present combo that I have to new one.

wow , nice built to be
could you tell us actual weight of those parts ?
I will have soon mine from jure

[teocl]

Looks really good, but you still have to loose 320g to get "more = equal" , and when you have a bike that is already very light with a titanium frame (that weight's 1250g), you will spend more to loose those 320g without lowering the weight limit of the bike 100/110kg.

because below this "weight limit of the bike 100/110kg", it's easy to loose just with the wheels, with a sub 1kg wheels and a 22mm sprint tubular but I wouldn't ride that bike.

I agree. A bike is most enjoyable when one is able to ride it with confidence.

[elfuinha]

new parts have arrived:

the combo will be like my last one Calfee like, with UD wrapped joint.

Ax-lightness 4200 42cm
MCFK Stem 110mm
still have to get the old Kedge Garmin Mount.



Expect to remove between 80g, from the present combo that I have to new one.

wow , nice built to be
could you tell us actual weight of those parts ?
I will have soon mine from jure

90g stem
175g handlebar
30g K-edge

[elfuinha]

All shipped.
The waiting starts.

[elfuinha]

here is some work that is being made by BERK:

[elfuinha]

a little update, almost done:

[elfuinha]

Already shipped.
Haven't seen the finish product.
Pictures tomorrow.
Next week should be here.

[GT56]

cool, what is the headtube length and stack-height ?

txs

It's a stock size 54 with a 5mm spacer.

txs, but can you measure the headtube lenght, the Moots Geo Table only shows the version with the regular headtube ?

[teocl]

Mine measures 13.5cm.
It is 1 cm longer than the standard headtube as per stated by Moots. The result is a similar stack as the standard head tube.

[elfuinha]

all complete now.

Thanks Berk, another great BarStem Combo:








6140g:
Frame - Moots Vamoots RSL 56 + Paragon Stainless Cable Ajusters
Fork - THM Scapula F with custom black decals matt
Front derailleur hanger - MCFK 3K 34.9mm New Version
Chain Catcher - RaceWare 3D Printed Hollow Titanium
Headset - chris king sotto voce 1 1/8 nothreadset headset + SPIN Titanium 3mm Base Plate.
spacers - RaceWare 3D Printed Hollow Titanium - Custom with my name, on one side of the 10mm
seatpost clamp - Tune 34.9mm
Seatpost - MCFK 3K 30.9mm + Parts of PassionM5 Yokes
Seat - MCFK 3K
Stem - MCFK 3k 110mm by BERK COMPOSITES, Ti Bolts
Bar - Ax-lightness 4200 42cm by BERK COMPOSITES
Bartape - Lizard Skins DSP 2,5mm
bottle cages and hardware - King Cages + ti Bolts
Cables - Campagnolo 2015
Brakes - THM Carbones Fibula with custom black decals matt
Brake Pads - Lightweight Shimano
Front derailleur - Campagnolo Super Record 2015
Rear derailleur - Campagnolo Super Record 2015
Crankset - THM Carbones Clavicula matt
Bottom Bracket - THM Carbones PFBB30
Chainrings - Carbon-Ti Road EVO Titanium 50/35
Chainring bolts - Parts of Passion
Chain - KMC X-11 SL DLC black
Shifters - Campagnolo Super Record 2015 + Ti hardware
Cassette - Campagnolo Super Record 11-25
Wheels - Lightweight Meilenstein 20/20 - 36T ratchet
Tubulars - FMB Paris Roubaix 25mm Silk
Pedals - Keywin Carbon-TI
Computer mounts - K-Edge Pioneer by BERK COMPOSITES
Computer/Sensors - Pioneer SGX-CA500

Add to remove the I-links and Mini-I-links as they don't fit the internal passage holes of the handlebar.