Moderator: Moderator Team
Looking forward to the build.
However, your levers are positioned quite low on the bars, and there is very little backwards rotation on the bars. You could achieve much the same position, and make it more pleasing on the eye by bringing the levers up the bars, rotating them backwards and losing the spacers.
Beautiful build though.
Only change I'd think about is what you've already suggested... changing the headset out for the "X" version. You have the "Y" version made by Acros. I really don't like that design as much, both from an aesthetic and a functional standpoint. The little wedge and screw just seems like at best it would be a dirt collector and at worse it seems like it would be very easy for it to come loose over time and require constant readjusting. The X version (made by FSA I believe) is much cleaner looking and you also have the option of using the lower top cap or the higher one. You don't have that option with the Acros. Would also get black versus white, but definitely black spacers. Please don't slam it or anything dumb like that unless that truly is where you want it to end up. While 3cm of spacers on top of the headset cover is quite a bit aesthetically, if that's what you need then fine, and 2cm or less is perfectly fine aesthetically as well in my eyes at least. Fit first.
- Similar Topics
- Last post
Giant TCR Pro build..now with finished pictures.
Last post by alpinestar « Thu Sep 07, 2017 3:09 pmReplies: 31
Posted in Introduce Yourself / Gallery - Please use metric weights.by alpinestar » Thu Aug 10, 2017 8:39 pm » in Introduce Yourself / Gallery - Please use metric weights.
- 31 Replies
- 6374 Views
Last post by alpinestar
Thu Sep 07, 2017 3:09 pm