Specialized Allez Sprint
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Hello!
Soon I have got all the parts to start building it
Specs:
2024 Allez Sprint Disc Size 56
Roval Rapide cockpit
S-works seatpost
Björn Setka saddle
Lightbicycle WR45 rims
Extralite Cyberfront and Cyberrear hubs
Dtswiss Aerolite spokes
Sram Red Shifters with Andrea Campenni Design carbon clamps
Sram Red xplr rear derailleur
Sram Red 10-36 cassette
Hope Rx4+ brakes with Galfer rotors
Elilee X-novanta crank with Garbaruk 42T lightweight chainring
Ceramicspeed BB
Soon I have got all the parts to start building it
Specs:
2024 Allez Sprint Disc Size 56
Roval Rapide cockpit
S-works seatpost
Björn Setka saddle
Lightbicycle WR45 rims
Extralite Cyberfront and Cyberrear hubs
Dtswiss Aerolite spokes
Sram Red Shifters with Andrea Campenni Design carbon clamps
Sram Red xplr rear derailleur
Sram Red 10-36 cassette
Hope Rx4+ brakes with Galfer rotors
Elilee X-novanta crank with Garbaruk 42T lightweight chainring
Ceramicspeed BB
Last edited by Tlundberg on Tue Jan 14, 2025 4:13 pm, edited 1 time in total.
Allez Sprint - WIP
Crux DSW - WIP
Epic HT - WIP
Crux DSW - WIP
Epic HT - WIP
- justinfoxphotos
- Posts: 291
- Joined: Thu Jul 25, 2024 12:38 am
- Location: Sydney, AUSTRALIA
- Contact:
Nice! Looks like you might get the build very close to 7kg flat!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Got my 3D printed adapters for the Roval Rapide cockpit from Racewear Direct. Bottom bracket and rear derailleurhanger and a few other parts will be in red. Hope it will be fine with silver and black
Allez Sprint - WIP
Crux DSW - WIP
Epic HT - WIP
Crux DSW - WIP
Epic HT - WIP
Hope Rx4+ in red also
Got the spokes today so the wheels will end up at 1280g. Almost regret that I didn't go for carbon spokes, that had got them down to around 1200g
Rx4+ is the same weight as Dura-Ace but they are 4-pot calipers vs DA 2-pot
Got the spokes today so the wheels will end up at 1280g. Almost regret that I didn't go for carbon spokes, that had got them down to around 1200g
Rx4+ is the same weight as Dura-Ace but they are 4-pot calipers vs DA 2-pot
Allez Sprint - WIP
Crux DSW - WIP
Epic HT - WIP
Crux DSW - WIP
Epic HT - WIP
I have cut the fork and mounted Continental GP 5000 in 30mm width. A few more parts then it's complete. The Roval rapide computermount is rather heavy, can anyone recommend a lighter one? Seems like 6,9 kg might be possible w/o pedals
Allez Sprint - WIP
Crux DSW - WIP
Epic HT - WIP
Crux DSW - WIP
Epic HT - WIP
- justinfoxphotos
- Posts: 291
- Joined: Thu Jul 25, 2024 12:38 am
- Location: Sydney, AUSTRALIA
- Contact:
I got one from MagCAD for my SL8. 18g, which is much lighter than the 52g Roval mount.
https://www.magcad-designs.com/products ... ized-mount
Had a change of mind, I'm going for a 1X setup and Shimano doesn't offer much so I have ordered Sram Red shifters, carbon clamps from Andrea Campenni Design, Sram Red Xplr rear derailleur so I will have the ability to run a 10-44 if going abroad to somewhere with mountains. But will use a Red 10-36 cassette and Garbaruk 42T chainring in their lightweight design for now
Allez Sprint - WIP
Crux DSW - WIP
Epic HT - WIP
Crux DSW - WIP
Epic HT - WIP
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com