Custom Enve Fray build (naked carbon)

[jayjay]

The bike will be build by my LBS next week and I can't be more excited

Some weights for my size 56 frame:
Frame with all hangers, bolts, storage cover etc: 1055g (UDH derailleur hanger is 26g) (no seatpost clamp, headset cover etc)
Frame with only front derailleur hanger: 941g (hanger isn’t removable )
Fork uncut: 477g

SES AR One-Piece handlebar size 100mm x 40cm
Handlebar with endcaps: 353g
Topcap with bolt: 10g
Computer mount: 43g

Fork expander: 22g
Headset cover, bearings etc: 88g
Seatpost clamp: 29g
Seatpost (350mm / 0mm offset): 187g
Di2 plug: 7g
Thru axles: front 33g / rear 43g
2x storage sleeves: 76g (not sure yet if I need both)

[B0tt0mline]

Great!

Which bikeshop did you choose?

[jayjay]

Great!

Which bikeshop did you choose?

Thanks.
Paint was done by @editvelogirona

[morrisond]

Great!

Which bikeshop did you choose?

Thanks.
Paint was done by @editvelogirona

Did you order it naked from ENVE and they did the Decals or did they have to strip the paint? It looks nice. The only thing I probably would have done was to have the Paint shop put the same coloured logos on the stem and presumably the post.

[jayjay]

Did you order it naked from ENVE and they did the Decals or did they have to strip the paint? It looks nice. The only thing I probably would have done was to have the Paint shop put the same coloured logos on the stem and presumably the post.

They had to remove all the paint.
God damn, I did no think about the logos on the handlebar and seatpost
I guess it's too late now...

[EtoDemerzel]

fantastic custom job!
you can still get stickers to match and put on the seatpost and stem.

[jayjay]

fantastic custom job!
you can still get stickers to match and put on the seatpost and stem.

Thanks!
Should I talk to my painter about these stickers? Or who could produce them?

[jayjay]

Wheels are done:
Nextie NXT35CGX (25mm internal / 32mm external)
DT Swiss 350
Sapim CX-Ray
Brass nipples
Conti GP 5000 30mm
RideNow TPU tubes
Shimano RT-CL900 discs

A little bit heavier than I hoped
Front: 707g
Rear: 822g

[EtoDemerzel]

fantastic custom job!
you can still get stickers to match and put on the seatpost and stem.

Thanks!
Should I talk to my painter about these stickers? Or who could produce them?

Your painter should be able to supply them or Enve can give you the company to order custom decals from.

[bmCube]

Here are some company's that enve recommends for custom decals: Groundkeepercustom.com, Slikgraphics.com, Stikrd.com
I ordered mine from slikgraphics

[jayjay]

8,0 kg

Ultegra Di2 and DuraAce 11-34 cassette.
Garmin Ralley pedals
Arundel Mandible cages
Enve/K-Edge computer mount + GoPro mount
CeramicSpeed T47 bb
Specialized Power Arc Pro Elaston
Conti GP 5000 30mm -> WAM 32,2mm
Also added a few oil slick titanium bolts 13g instead of the 8g for the cheap aluminium bolts

[kode54]

Great!

Which bikeshop did you choose?

Thanks.
Paint was done by @editvelogirona

Did you order it naked from ENVE and they did the Decals or did they have to strip the paint? It looks nice. The only thing I probably would have done was to have the Paint shop put the same coloured logos on the stem and presumably the post.

I think the naked carbon looks great as is. Matching the logos on stem and seatpost may be a bit much/loud.

[rollinslow]

That is a great looking bike! I really like the decal on the head tube.