Aethos S-works [Custombuild]

[BREW2]

Sharing my new custom Aethos S-WORKS Size 56 build.

Goal weight: 5.5kg + - 100g with sram red axs and some light german carbon parts

Aethos S-works frame + fork (cuted) size 56 - 913g
Axle f+b - 52g
headset - 44g
spacer - 2g
Seatpost clamp - 18g
hanger - 13g
derailleurhanger front - 9g
Fork expander x bolt - 21g
Tot framekit with hardware- 1072g


THM Clavicula vevparti - 305g
Carbon TI 46-33 - 106g
Carbon TI klingbultar - 7g
Total crankset - 418g

Ceramicspeed BSA 30mm
Bottombracket 75g

MCFK stem - 89g
MCFK handlebar - 176g
Cockpit total - 265




(picture taken)

[BREW2]

637g for frame with bottlecagebolts, protecting tape and without as the picture show 631g.
282g fork (cut).

[BREW2]

[BREW2]

First out is the crankset: THM Clavicula 172.5mm 110bcd 5arm.
CarbonTi carborings 46x33t
CarbonTi crankbolts

Weight crankset Total- 418g
crank - 305g
bolts - 8g
Chainring x2 - 106g

[Eldasch]

The crankset is a beauty
I guess I will also get one.

[BREW2]

The crankset is a beauty
I guess I will also geht one.

Just buy!

[BREW2]

Ceramicspeed BSA - 75g

[BREW2]

MCFK 100mm stem - 89g
MCFK 420mm handlebar - 176g
Cockpit tot - 265g

[bikeboy1tr]

Its a beauty for sure, but you state that it is a size 56 but the seat tube shows 54.

[BREW2]

Its a beauty for sure, but you state that it is a size 56 but the seat tube shows 54.

Yeps, sorry for that. The picture was taken from the web because mine was ugly.

[BREW2]

WHEELS

Rim ROVAL Alpinist (24h front and rear).
weight 343 & 333.5g

Hubs DT-swiss 180 straightpull 24H
Weight
Rear- 182g
Front - 94g

Spokes & nipples
DT revolution straightpull 2.0 - 1.5 - 2.0
12 (285mm) + 35 (288mm)
DT prolock hexagonal 14mm alu.

Complete Wheelset x rims-hubs-spokes-nipples
WEIGHT-1197g

[ome rodriguez]

Very nice! Like the frame color and quite light for a 56 build.
Where did you buy roval alpinist rims only?

[Osoi3900]

Nice Global set

[damond]

The build is top notch but damn!!! That's an awesome set of Global knifes!!!!

[Prawn]

That's a dedicated effort on the wheels... am I correct in saying that switching to the 180s saved 50g compared to roval hubs?