Basso Diamante ultegra di2

[MrCurrieinahurry]

My bmc should be back on the road soon and I'll compare them properly

Sent from my MAR-LX1B using Tapatalk

[MrCurrieinahurry]

..

Sent from my MAR-LX1B using Tapatalk

[Osoi3900]

..

Sent from my MAR-LX1B using Tapatalk

When the standard 8 vertices rectangular prism is just too heavy.

[MrCurrieinahurry]

Looks beautifuly made. Had it Custom painted to match my basso and has come in at 90 grammes so super happy...

Sent from my MAR-LX1B using Tapatalk

[itsacarr]

Well that is a nice touch.

[tomsneo]

Very nice! what else do you have planned?

[nismosr]

Beautiful saddle!

[nismosr]

I've picked up the same frame and groupset. I wanted to tidy up the di2 because the cable going in to that down tube cable stop isn't particularly tidy. On the 2020 frame set it runs in through a hole in the brake stop. There's plenty of material on the brake stop so you can cut a small notch in there and run the cable in through next to the brake cable.

Thanks for the idea Slack, I just did this and looks cleaner now.

[MrCurrieinahurry]

I'm gunna do the cable mod when I'm free next to pop to the shop.. Did you guys have to change the di2 cable for a longer one do you know?

Sent from my MAR-LX1B using Tapatalk

[itsacarr]

I'm excessive but I used to run a shorter cable from bar into down tube. Then put an extender then a cable down to junction. It that was so I could take the front off for various travel.

Otherwise I always used the longest di2 cable regardless to be safe. 1000-1200mm with 40mm bars and bar end junction.

[MrCurrieinahurry]

Well vred superlight latex tubes installed 94 grammes saved. Was going to whack the corsa controls on but hadn't realised the hutchinsons are only 384g for the pair where as the corsa controls were 547g.
So they are back hanging up.


Sent from my MAR-LX1B using Tapatalk

[MrCurrieinahurry]

[tomsneo]

looking good!

[Osoi3900]

You need a higer gate

[MrCurrieinahurry]

Hahaha deof ain't my gate mate lol