Please delete, topic is mess, i will create a new one.

[card0s]

Sexy!!
I am thinking of going the same route as you, get an Ultegra mechanical and changing over time the groupset to Force or who knows the new to be released next year Shimano eletronic groupset.
It would be quite the upgrade from my Look 675 Light.
Altough I am also considering the new Canyon Aeroad and the Look 795 Blade RS, which are a bit more aero focused but also heavier.

[Mcdeez]

Awsome build! I have a supersix evo too, love it!

Отправлено с моего CLT-L04 через Tapatalk

[req110]

I bought s-tubo on front (22g), and tubolito road on rear (40g) and saved something

I was doing some weight-ins on my kitchen scale

Front wheel, lb46 x-hub, gp5k 25, s-tubo, axle, red 160mm = 1025g
Rear same, cassette 11-28 red, red 140mm = 1307g
Frameset, groupset, cages, pedals, hb, computer mount, etc, saddle winter china (135g) with radar mount (45g) 4282g

Means
6614g total with wintersaddle135g and radar mount45

6569g total with saddle135g, NoRadarMount

Potential:

Seatpost yokes are 46g, i should save 22g J&L ordered yesterday

Replace my rotors, sram 118 102 = 220g / for xtr 90 105 = 195g / galfer 76 98 = 174g

save 25g with XTR / save 46g with Galfer
save 5g with saddle (back to my selle slr boost carbonio l3 vs. this china)

So from actual 6569g i can save additional 73g and move to 6496g

[req110]

As posted here
viewtopic.php?f=3&t=156359&p=1654748#p1654748

I had issue with damaged carbon on head tube, cannondale gave me new frameset, so i am on MY2021 now.

6466g (including two cages, computer mount, 4iiii power meter, pedals. NOT including radar mount and gopro mount.)

Frameset, supersix evo hi-mod team replica my2021, size 54cm
Front, LB46 carbon ti x-hub, gp5k 25 clincher, tubolito s-tubo, galfer road centerlock 160mm
Rear, LB46 carbon ti x-hub 56T, gp5k 25 clincher, tubolito road, cassette 11-28 Red, galfer road centerlock 140mm
Groupset SRAM RED ETAP 11s
Crankset Cannondale SISL2, 172.5mm, 50/34 with 4iiii Podiiiium 520g
Chain KMC
Seatpost with J&L yokes and carbon cradle
Cockpit Farsports F1 400x110, with garmin mount, 325g total
7.5mm + 7.5mm spacers + 5mm conversion kit
Pedals Speedplay Ti 170g
Cages Bontrager XXX 2x19g, Ti bolts
Saddle Selle Italia SLR Boost Carbonio L3 132g
Deda bartape, around 26g... now i moved to some silca tape, which is around 10g heavier

[trex]

Would you be so kind and share with us what kind of J&L yokes and carbon cradle did you use?
This one? https://www.ebay.pl/itm/J-L-Ti-Screw-Yo ... Swl09gIAbL
What about that carbon cradle?

Many thanks!

As posted here
viewtopic.php?f=3&t=156359&p=1654748#p1654748

I had issue with damaged carbon on head tube, cannondale gave me new frameset, so i am on MY2021 now.

6466g (including two cages, computer mount, 4iiii power meter, pedals. NOT including radar mount and gopro mount.)

Frameset, supersix evo hi-mod team replica my2021, size 54cm
Front, LB46 carbon ti x-hub, gp5k 25 clincher, tubolito s-tubo, galfer road centerlock 160mm
Rear, LB46 carbon ti x-hub 56T, gp5k 25 clincher, tubolito road, cassette 11-28 Red, galfer road centerlock 140mm
Groupset SRAM RED ETAP 11s
Crankset Cannondale SISL2, 172.5mm, 50/34 with 4iiii Podiiiium 520g
Chain KMC
Seatpost with J&L yokes and carbon cradle
Cockpit Farsports F1 400x110, with garmin mount, 325g total
7.5mm + 7.5mm spacers + 5mm conversion kit
Pedals Speedplay Ti 170g
Cages Bontrager XXX 2x19g, Ti bolts
Saddle Selle Italia SLR Boost Carbonio L3 132g

[req110]

Exactly those yokes. (J&L from above url)

The carbon cradle is this one, but it's taller and it's not the best fit. It is around 11g, stock is 17g or so. I am not using their yokes.

https://www.aliexpress.com/item/3290577 ... 47b4f25363

[req110]

Moving to Acros Mellow tape gained around 10g, but much better look and incredible feel!

[Aryeh]

This 3d printed radar mount is 7.5g and works well for me.

[req110]

Wow, can you provide a source?

[card0s]

This 3d printed radar mount is 7.5g and works well for me.

Looks nice.
Do you have a sideways picture with the radar mounted?

[Aryeh]

This 3d printed radar mount is 7.5g and works well for me.

Looks nice.
Do you have a sideways picture with the radar mounted?

Here you go

[Aryeh]

Wow, can you provide a source?

Here's a link to the file https://www.thingiverse.com/thing:4788212

I ordered it from https://www.makexyz.com/

[card0s]

This 3d printed radar mount is 7.5g and works well for me.

Looks nice.
Do you have a sideways picture with the radar mounted?

Here you go

Thank you. It looks very nice, I'll have to get one myself now

[George46GR]

Wow, can you provide a source?

Here's a link to the file https://www.thingiverse.com/thing:4788212

I ordered it from https://www.makexyz.com/

THANK YOU SO MUCH !!!! It will be perfect under my saddle with oval (7x9) carbon rails, in order to mount my magicshine rear light which has a garmin mount.

Thank you again !!!

[req110]

Disadvantage of this mount, opposed to mine, is that it won't allow you to use even the smallest saddlebag. I am storing my tools, spare, etc. in toolBottle, but for longer rides, i move some of the stuff to small saddle bag, so i can use two bottles.

But of course the weight advantage is teasing. On the other hand, i think the proper metric of weighting bikes is - bike + bottle cages + computer mount + pedals.... while computer itself, and mounts for lights or pump are not included.