Cervélo Áspero 7.37kg

Who are you (no off-topic talk please)

Moderator: Moderator Team

User avatar
VTR1000SP2
Posts: 798
Joined: Tue Nov 05, 2013 8:21 pm

by VTR1000SP2

ooo wrote:It will look nicer if you can get valves with the same size.
What about rotor sizes? Have you tried 140 rear or 140 front/rear?
dur-ace 2x118 g (160 mm) to xtr/xt 2x88 g (140 mm) thats -60 grams
Wheels have been replaced with a spare set while I sand the logos off. Will replace the valves before they go back on.

I did consider going with smaller rotors but the negatives outweighed the positives so 160 is where I’m at.


Sent from my iPhone using Tapatalk

by Weenie


User avatar
LeDuke
Posts: 1547
Joined: Sun Oct 07, 2012 2:39 am
Location: Front Range, CO

by LeDuke

Subscribed. Bought my wife the Apex version, and it’s heavier than my HT MTB.

Weight was 9.7kg or something around there. Stock wheels will get swapped, will go tubeless as well. Hoping to figure out a way to swap out the ~800g stock cranks for a pair of Hollowgram SLs, too.




Sent from my iPhone using Tapatalk

User avatar
VTR1000SP2
Posts: 798
Joined: Tue Nov 05, 2013 8:21 pm

by VTR1000SP2

LeDuke wrote:Subscribed. Bought my wife the Apex version, and it’s heavier than my HT MTB.

Weight was 9.7kg or something around there. Stock wheels will get swapped, will go tubeless as well. Hoping to figure out a way to swap out the ~800g stock cranks for a pair of Hollowgram SLs, too.




Sent from my iPhone using Tapatalk
Hollowgram won’t fit on a BBRight frame. Your lightest option is the EC90SL.


Sent from my iPhone using Tapatalk

User avatar
LeDuke
Posts: 1547
Joined: Sun Oct 07, 2012 2:39 am
Location: Front Range, CO

by LeDuke

VTR1000SP2 wrote: Hollowgram won’t fit on a BBRight frame. Your lightest option is the EC90SL.


Sent from my iPhone using Tapatalk
I’ve seen people say this. Why is that?

I have 119mm, 125mm, 131mm, and 133mm spindles for the cranks in question. I also have multiple chainring options to adjust chain line.

Hell, the EC90s (can) use a RaceFace spindle, which is a direct copy of Hollowgram spindles and 100% compatible.

Sent from my iPhone using Tapatalk

User avatar
VTR1000SP2
Posts: 798
Joined: Tue Nov 05, 2013 8:21 pm

by VTR1000SP2

LeDuke wrote:
Sun Oct 20, 2019 4:34 pm
VTR1000SP2 wrote: Hollowgram won’t fit on a BBRight frame. Your lightest option is the EC90SL.


Sent from my iPhone using Tapatalk
I’ve seen people say this. Why is that?

I have 119mm, 125mm, 131mm, and 133mm spindles for the cranks in question. I also have multiple chainring options to adjust chain line.

Hell, the EC90s (can) use a RaceFace spindle, which is a direct copy of Hollowgram spindles and 100% compatible.

Sent from my iPhone using Tapatalk
Sounds like you may very well have the parts needed to make one fit but in the past when I looked into it, the consensus then was that it wouldn't work.

User avatar
VTR1000SP2
Posts: 798
Joined: Tue Nov 05, 2013 8:21 pm

by VTR1000SP2

Quick update: Favero pedals now have the Xpedo Mforce 4 bodies mounted and Stan's wheels replaced (while I sand the logos off very slowly), with ENVE 4.5ARs setup tubeless with the 38mm Panaracer GKs. Weight as pictured with dirt but without lights or computer is 7.56kg and most of the increase is due to the Xpedo pedal bodies, c'est la vie.

Image

User avatar
prebsy
Posts: 893
Joined: Tue Oct 23, 2012 10:52 pm
Location: PHL

by prebsy

@VTR1000SP2 your bike just showed up on glory_cycles IG you should get some credit for such a beautiful build =]

Sent from my moto g(7) using Tapatalk


User avatar
VTR1000SP2
Posts: 798
Joined: Tue Nov 05, 2013 8:21 pm

by VTR1000SP2

prebsy wrote:@VTR1000SP2 your bike just showed up on glory_cycles IG you should get some credit for such a beautiful build =]

Sent from my moto g(7) using Tapatalk
Cheers for that!


Sent from my iPhone using Tapatalk

Post Reply
  • Similar Topics
    Replies
    Views
    Last post