Bucket list bike: Mosaic RT1

Who are you (no off-topic talk please)

Moderator: Moderator Team

Imaking20
Posts: 2050
Joined: Fri Nov 18, 2011 5:19 am

by Imaking20

*heavy breathing*

Lighter than expected:
Image

Also PF30, which wasn't expected. And means I get to play the "waiting on a bottom bracket" game again :(
Current:
Acid Minty

Retired:
Wilier Wonka | The Dentist | The Bucket List | Specialissima | Evo | T2 | Blue | Project C6.0 | Felt AR FRD | Colnago C59 | S-Works Tarmac SL4| S-Works Venge | Wilier Cento1 SL | Tarmac SL2

User avatar
pdlpsher1
Posts: 2424
Joined: Thu Jul 19, 2012 6:09 pm
Location: CO

by pdlpsher1

A competent builder can tap T47 threads in a PF30 shell. There’s a YouTube video on how this is done properly. I have a T47 and with a CK T47 BB it’s free spinning and noise free. I also got the CK grease injection head for the BB. Twice a year I remove the crank and inject fresh grease (cheap green marine waterproof grease) through the BB bearings. New grease goes in and the nasty black grease comes out. Will proper maintenance the T47 BB will likely outlive me.


Sent from my iPhone using Tapatalk

by Weenie


Imaking20
Posts: 2050
Joined: Fri Nov 18, 2011 5:19 am

by Imaking20

Oh, I'm actually one of the few who is a fan of PF30. Especially in a BB that started life as a round tube. I never had a peep out of my delrin BBs in the T2.
Current:
Acid Minty

Retired:
Wilier Wonka | The Dentist | The Bucket List | Specialissima | Evo | T2 | Blue | Project C6.0 | Felt AR FRD | Colnago C59 | S-Works Tarmac SL4| S-Works Venge | Wilier Cento1 SL | Tarmac SL2

RyanH
Moderator
Posts: 2580
Joined: Tue Jan 17, 2012 4:01 pm
Location: Los Angeles, CA
Contact:

by RyanH

Seconded. PF30 in a Ti frame is quite good, particularly when paired with a delrin BB.

User avatar
godzuki26
Posts: 1200
Joined: Sat Jul 28, 2012 11:31 pm

by godzuki26

Nice! Is that set up for internal cable routing?

@Dudemanppl - thoughts on this frameset please.
:arrow: BH Ultralight
:arrow: Litespeed Ghisallo
:arrow: Scott Addict Singlespeed
_________________

ImageCannondale Evo HiMod
ImageFelt AR FRD

Imaking20
Posts: 2050
Joined: Fri Nov 18, 2011 5:19 am

by Imaking20

^Is that a joke? Please don't ask for him to come share his opinion here...

The frame is setup for electronic only.
Current:
Acid Minty

Retired:
Wilier Wonka | The Dentist | The Bucket List | Specialissima | Evo | T2 | Blue | Project C6.0 | Felt AR FRD | Colnago C59 | S-Works Tarmac SL4| S-Works Venge | Wilier Cento1 SL | Tarmac SL2

dudemanppl
Posts: 963
Joined: Fri Feb 22, 2013 5:09 am

by dudemanppl

:D

KarlC
Posts: 948
Joined: Fri Dec 05, 2014 2:08 am
Location: San Diego Ca USA

by KarlC

godzuki26 wrote:
Fri Apr 05, 2019 3:05 am
Nice! Is that set up for internal cable routing?

@Dudemanppl - thoughts on this frameset please.
LOL ..... stir that pot

.

Imaking20
Posts: 2050
Joined: Fri Nov 18, 2011 5:19 am

by Imaking20

Built... ish

Image
Current:
Acid Minty

Retired:
Wilier Wonka | The Dentist | The Bucket List | Specialissima | Evo | T2 | Blue | Project C6.0 | Felt AR FRD | Colnago C59 | S-Works Tarmac SL4| S-Works Venge | Wilier Cento1 SL | Tarmac SL2

romanmoser
Posts: 320
Joined: Sun May 06, 2018 8:30 pm

by romanmoser

It's more than okay

User avatar
jbaillie
Posts: 573
Joined: Thu Nov 01, 2012 4:17 pm

by jbaillie

Looks awesome & plenty of drop. What topper is that?

Imaking20
Posts: 2050
Joined: Fri Nov 18, 2011 5:19 am

by Imaking20

It's a Ritchey topper. The graphics are lasered on top of the black finish, so a steady hand and about 10 minutes with a new razor blade cleaned it up.
Current:
Acid Minty

Retired:
Wilier Wonka | The Dentist | The Bucket List | Specialissima | Evo | T2 | Blue | Project C6.0 | Felt AR FRD | Colnago C59 | S-Works Tarmac SL4| S-Works Venge | Wilier Cento1 SL | Tarmac SL2

AZR3
Posts: 822
Joined: Wed Sep 12, 2012 9:00 pm
Location: Az USA

by AZR3

Bummer this didn’t workout for you, loved the look of it

KarlC
Posts: 948
Joined: Fri Dec 05, 2014 2:08 am
Location: San Diego Ca USA

by KarlC

AZR3 wrote:
Mon Apr 15, 2019 11:46 pm
Bummer this didn’t workout for you, loved the look of it
Yea, I was looking forward to this build

.

kode54
Posts: 1635
Joined: Tue May 23, 2006 9:39 pm

by kode54

what happened? didn't fit?
- Factor 02 Disc + DA9170 + Enve 4.5AR CK CL hubs
- Moots Vamoots Disc RSL Titanium + DA9170 + Enve 3.4AR CK CL hubs
- Parlee Altum + DA9150 + Enve SES 4.5 Ene carbon hubs
- Argonaut Spacebike 2.0 + DA9170 + Enve SES 5.6 DT Swiss 240 CL hubs

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post