Who are you (no off-topic talk please)
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
Perp
- Posts: 54
- Joined: Sat Jan 19, 2013 3:03 am
by Perp on Fri Jul 09, 2021 12:19 pm
biwa wrote:Anyone with a size M Alpe d'Huez know/could measure the c-t length of the seat tube? The geometry doesn't show.
Just got my M frame. What exactly is c-t? BB to TT or post?
Sent from my Pixel 5 using Tapatalk
-
biwa
- Posts: 411
- Joined: Fri Sep 21, 2018 8:39 pm
by biwa on Sat Jul 10, 2021 4:02 am
Perp wrote: ↑Fri Jul 09, 2021 12:19 pm
biwa wrote:Anyone with a size M Alpe d'Huez know/could measure the c-t length of the seat tube? The geometry doesn't show.
Just got my M frame. What exactly is c-t? BB to TT or post?
Sent from my Pixel 5 using Tapatalk
Thanks for your help. I mean from the centre of BB to the end of the seat tube where the seatpost inserts (highlighted in the red box in the pic). Is that how you measure it at 52cm?
-
Attachments
-
-
Perp
- Posts: 54
- Joined: Sat Jan 19, 2013 3:03 am
by Perp on Sat Jul 10, 2021 5:13 pm
biwa wrote:Perp wrote: ↑Fri Jul 09, 2021 12:19 pm
biwa wrote:Anyone with a size M Alpe d'Huez know/could measure the c-t length of the seat tube? The geometry doesn't show.
Just got my M frame. What exactly is c-t? BB to TT or post?
Sent from my Pixel 5 using Tapatalk
Thanks for your help. I mean from the centre of BB to the end of the seat tube where the seatpost inserts (highlighted in the red box in the pic). Is that how you measure it at 52cm?
Yes, that's what I measured
Sent from my Pixel 5 using Tapatalk
-
JimmyM13
- Posts: 1
- Joined: Mon Oct 12, 2020 5:00 am
by JimmyM13 on Wed Oct 13, 2021 9:16 am
Just checking with the group but anyone else had one of those ti bolts snap? I bust one today (bikes a year old) but obviously not a quick fix and going to be a warranty claim:-(
-
Kumppa
- Posts: 488
- Joined: Mon Oct 13, 2014 10:05 am
-
jmagoulas
- Posts: 156
- Joined: Mon Dec 26, 2016 3:00 am
- Location: Connecticut USA
-
unclearv
- Posts: 74
- Joined: Sun Apr 14, 2019 2:32 pm
by unclearv on Mon May 23, 2022 4:32 pm
Looking at the geo charts but I see a dip in the top tube where the stem is mounted.
Can anyone confirm that the stack height in the chart starts at the top of the headset cap or if it is a across the top of the top tube so +5 or +3mm?
-
fersl7
- Posts: 4
- Joined: Wed Jul 27, 2022 3:03 pm
by fersl7 on Thu Jul 28, 2022 2:24 pm
Time Alpe d huez 01, I have a problem with the titanium bolt (screw)that goes in the frame that holds the seat clamp, it was released from the frame and is loose, it is glued or has a metal insert, how is it fixed to the frame??
-
jmagoulas
- Posts: 156
- Joined: Mon Dec 26, 2016 3:00 am
- Location: Connecticut USA
by jmagoulas on Fri Jul 29, 2022 8:19 pm
fersl7 wrote: ↑Thu Jul 28, 2022 2:24 pm
Time Alpe d huez 01, I have a problem with the titanium bolt (screw)that goes in the frame that holds the seat clamp, it was released from the frame and is loose, it is glued or has a metal insert, how is it fixed to the frame??
I believe bonded in during the layup process. Over torqued?
-
fersl7
- Posts: 4
- Joined: Wed Jul 27, 2022 3:03 pm
by fersl7 on Sat Jul 30, 2022 4:03 am
Well no over torqued because in the frame instructions say it's 6nm and I have a 5nm tool , so I guess is a factory defect
I don't want glue in my frame
-
wheelsONfire
- Posts: 6294
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
by wheelsONfire on Sat Jul 30, 2022 10:07 am
fersl7 wrote: ↑Sat Jul 30, 2022 4:03 am
Well no over torqued because in the frame instructions say it's 6nm and I have a 5nm tool , so I guess is a factory defect
I don't want glue in my frame
Glue will not hold either, not the typical super glue anyway!
Interested to read if you get a Time repair on this or a DIY from you or a bike shop.
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.