This one?
2019 S-Works Tarmac SL6 Disc QuickStep
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
0* Offset post, available directly from specialized. I have one on my SL6Cdavies102 wrote: ↑Sat Feb 16, 2019 12:33 pmYes interesting setup. The SL6 seatpost is D shaped so must be custom offset?
-
- Posts: 42
- Joined: Thu Jan 17, 2019 10:21 am
I'd noticed your 0 degree Offset post in the other thread - it just looked almost a +10 degree post in the pic!colagreek wrote: ↑Fri Feb 22, 2019 7:18 pm0* Offset post, available directly from specialized. I have one on my SL6Cdavies102 wrote: ↑Sat Feb 16, 2019 12:33 pmYes interesting setup. The SL6 seatpost is D shaped so must be custom offset?
-
- Posts: 42
- Joined: Thu Jan 17, 2019 10:21 am
-
- Posts: 42
- Joined: Thu Jan 17, 2019 10:21 am
Is anyone able to confirm these are the BB adapters I need to work with my CeramicSpeed BB30 Bearings that came with the frame please?
I'm new to this kind of thing and thought it would be a lot easier to find what I need to use considering how popular OSBB/BB30 Specialized framesets with Shimano HollowTech II Crankset combos are? Do Specialized or Shimano not sell them as an aftermarket part? Thanks
https://www.evanscycles.com/wheels-manu ... YsQAvD_BwE
I'm new to this kind of thing and thought it would be a lot easier to find what I need to use considering how popular OSBB/BB30 Specialized framesets with Shimano HollowTech II Crankset combos are? Do Specialized or Shimano not sell them as an aftermarket part? Thanks
https://www.evanscycles.com/wheels-manu ... YsQAvD_BwE
Those are the adapters included yes. Shimano doesn't have any adaptors for anything. Specialized got the ones included as spare parts too.
/jonas l
http://instagram.com/jonaslundb
http://instagram.com/jonaslundb
If you're planning on using a Shimano crank, then perhaps install a proper BB30 insert and sell the BB30 bearings? I first tried adaptors (both Spec and Wheels MFR), and was not pleased with fit... gaps between the BB shell and adaptor, crank arms not equidistant from chain stays, etc. I then tried fitting a Praxxis Ceramic BB30 insert which resulted in a 2mm gap on the drive side cup when fully tight. Pass.Cdavies102 wrote: ↑Thu Feb 28, 2019 10:51 amIs anyone able to confirm these are the BB adapters I need to work with my CeramicSpeed BB30 Bearings that came with the frame please?
I'm new to this kind of thing and thought it would be a lot easier to find what I need to use considering how popular OSBB/BB30 Specialized framesets with Shimano HollowTech II Crankset combos are? Do Specialized or Shimano not sell them as an aftermarket part? Thanks
Finally went with the Ceramic Speed BB30 Insert. Fitment is PERFECT. According to the folks at Ceramic Speed, this is the setup Quickstep and Bora H both use. It's pricey - but the right solution IMHO.
https://www.ceramicspeed.com/en/sport/s ... mano-road/
Instagram @rich_dub_u
'19 Trek Emonda SLR H1 Rim Brake (6,250g) | '21 Sworks Tarmac SL7 (7,300g) | '21 BMC Teammachine SLR_01 | '15 Sworks Epic World Cup (10,242g)
'19 Trek Emonda SLR H1 Rim Brake (6,250g) | '21 Sworks Tarmac SL7 (7,300g) | '21 BMC Teammachine SLR_01 | '15 Sworks Epic World Cup (10,242g)
-
- Posts: 42
- Joined: Thu Jan 17, 2019 10:21 am
Thanks for the heads up - i’ve gone with your recommendation and purchased the same as you have. Hopefully it arrives early next week so I can get it built up.Rich_W wrote: ↑Fri Mar 01, 2019 3:08 pmIf you're planning on using a Shimano crank, then perhaps install a proper BB30 insert and sell the BB30 bearings? I first tried adaptors (both Spec and Wheels MFR), and was not pleased with fit... gaps between the BB shell and adaptor, crank arms not equidistant from chain stays, etc. I then tried fitting a Praxxis Ceramic BB30 insert which resulted in a 2mm gap on the drive side cup when fully tight. Pass.Cdavies102 wrote: ↑Thu Feb 28, 2019 10:51 amIs anyone able to confirm these are the BB adapters I need to work with my CeramicSpeed BB30 Bearings that came with the frame please?
I'm new to this kind of thing and thought it would be a lot easier to find what I need to use considering how popular OSBB/BB30 Specialized framesets with Shimano HollowTech II Crankset combos are? Do Specialized or Shimano not sell them as an aftermarket part? Thanks
Finally went with the Ceramic Speed BB30 Insert. Fitment is PERFECT. According to the folks at Ceramic Speed, this is the setup Quickstep and Bora H both use. It's pricey - but the right solution IMHO.
https://www.ceramicspeed.com/en/sport/s ... mano-road/
Thanks!
-
- Posts: 42
- Joined: Thu Jan 17, 2019 10:21 am
By the way, anyone after Ceramicspeed BB30 bearings - I have a new set for sale cheap!
Nice! Glad I could help. Looking forward to seeing your build.
Instagram @rich_dub_u
'19 Trek Emonda SLR H1 Rim Brake (6,250g) | '21 Sworks Tarmac SL7 (7,300g) | '21 BMC Teammachine SLR_01 | '15 Sworks Epic World Cup (10,242g)
'19 Trek Emonda SLR H1 Rim Brake (6,250g) | '21 Sworks Tarmac SL7 (7,300g) | '21 BMC Teammachine SLR_01 | '15 Sworks Epic World Cup (10,242g)
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 42
- Joined: Thu Jan 17, 2019 10:21 am
It’s done - for now!
Waiting for a few bits to finish it off (bottle cages, pedals, carbon PRO Stealth saddle etc) but it’s built and ready to ride! Really happy with how it’s turned out. Thanks to some of you guys for the help on wiring and bottom bracket, glad I went with the full CeramicSpeed bottom bracket instead of nylon inserts.
Went with the new XTR rotors - they look better in my opinion and are lighter than Dura Ace ones in 140/160mm sizes with the same tech.
Waiting for a few bits to finish it off (bottle cages, pedals, carbon PRO Stealth saddle etc) but it’s built and ready to ride! Really happy with how it’s turned out. Thanks to some of you guys for the help on wiring and bottom bracket, glad I went with the full CeramicSpeed bottom bracket instead of nylon inserts.
Went with the new XTR rotors - they look better in my opinion and are lighter than Dura Ace ones in 140/160mm sizes with the same tech.