SEVEN 622 SLX Carbon / Ti Lug

[KarlC]

Got this frame set recently as I've always liked the look the Carbon / Ti mixed bikes........















And as I recived her, once on display at Mellow Johnny's, the build sheet says she's a stock 54 with and ENVE 2.0 fork instead of the Seven 5e, I never really like the look of the curved Seven fork anyway. The beefy 1" stays are nice and shapley, all welds are very clean, no scratches to be found, its like she was never used ........

[KarlC]

The 54 frame came in at 1178g with the Chris King head set, I latter removed the Chris King head set and it was 90g, so that puts the frame at 1088g ........




The removed Chris King head set

[KarlC]

Enve 2.0 1 1/8" fork, it still could be trimed a bit and sanded or I could install my Enve 1.0 ?? (Enve 1.0 is 280g?)



Extralite crown race




Extralite Ultrastar 3 Expander, Top Cap and Bolt

[KarlC]

One of the goals I had for this project was to lower the stack so I installed a Extralite UltraTop / UltraBottem Headset. The UltraTop dropped it about 10mm vs the CK, then I used a Deda Superleggero Stem 120 -8 stem that has a 34mm stack. The 2 together droped it about 16mm.

Extralite UltraTop / UltraBottem Headset




Deda Superleggero Stem 120 -8 stem

[KarlC]

A few more parts

Campy Cups




Speedplay stainless




Dura Ace 11-30 11spd





Campy parts

[LeMomo]

Those lugs are absolutely stunning!

[burglarboycie]

Ooooh, ok this is looking good!!

[Look565w]

Holy smoke ........... looking forward to seeing it finished!

[KarlC]

Those lugs are absolutely stunning!

Yes they are relly nice and the carbon tubes are very interesting to watch as they change in the lighting



.

[KarlC]

The frame came with this 7 seat post clamp that I dont really like the looks of it



So I used this J&L clamp I had laying around




Berk Lupina Saddle - I have 2 of these now and love them




Unknow cheep ebay 27.2 seat post in 3K and clamp that I am using for now. I plan to change to 31.6 UD to match the rest of the tubes better (If my odd ball plan works that is)

[KarlC]

Cheep ebay cages that I had to modifi to make work as they where to tight to fit any bottle, I would not buy them again, but I had them so




Bottle cage bolts

[KarlC]

J&L skewers




Zipp 404 tubs with Veloflex Arenberg 25s

[KarlC]

Durring mock up, and the decided not to go with a -12 stem



With the CK headset and taller stack -10 stem





And here is a rather crapy pix of how she sites right now at 6.32kg. I plan to ride some and get to know her, then decide if I want to throw more WW parts at it.

[Grobar]

Nice build! Which handlebars do you use ? Are you happy so far with the chinese seatpost ?

[jbaillie]

That frame is pretty close to perfection. Definitely give it a proper photo shoot!