CX Build: Trek Crockett Disk 2018
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Happy with the arrival of the cassette today but unfortunately all of the tyres are over the advertised weight of 365g...
I'll be fitting the best of the bunch at 378g each. My teammate doesn't know it yet, but they're paying a finders fee of 12g
I'll be fitting the best of the bunch at 378g each. My teammate doesn't know it yet, but they're paying a finders fee of 12g
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Does anyone have experience selecting good inner tubes for CX?
Latex are lighter and will definitely help with the ride feel, but I don't want to puncture and I've heard they can adhere to your tyres over the course of a season. Should I stick with butyl?
Latex are lighter and will definitely help with the ride feel, but I don't want to puncture and I've heard they can adhere to your tyres over the course of a season. Should I stick with butyl?
Nice!
I think I'll be hitting the 9kg Mark then with a full hydro ultegra set up.
There are some bits which I'm thinking of getting that knock a bit the weight:
Kcnc post
Sub 200g saddle
Pro one or 5000 tl tyres
You mind posting another photo of the bike standing? Curious to see the volume of those Strada Biancas on the frame!
Also, are you able to place the rear axle closest to the frame wth those tyres on?
Congrats on the build!
I think I'll be hitting the 9kg Mark then with a full hydro ultegra set up.
There are some bits which I'm thinking of getting that knock a bit the weight:
Kcnc post
Sub 200g saddle
Pro one or 5000 tl tyres
You mind posting another photo of the bike standing? Curious to see the volume of those Strada Biancas on the frame!
Also, are you able to place the rear axle closest to the frame wth those tyres on?
Congrats on the build!
-
- in the industry
- Posts: 429
- Joined: Fri Dec 07, 2012 8:34 pm
- Location: CO
does anyone have crank arm to chainstay clearance issues with these frames? I have a size 58 2019 with sram force gxp crank and sram gxp press fit bottom bracket. drive side crank arm has 12-15mm chainstay clearance, non drive side has about 2mm chainstay clearance. i havent had a chance to tae some bb shell measurements but wondering if the rear triangle could be off.
im also getting a bad tick/creak while pedaling. replaced the bottomg bracket and the chainring/spider with a direct mount wolftooth and issue still there. i have yet to swap pedals to check that.
im also getting a bad tick/creak while pedaling. replaced the bottomg bracket and the chainring/spider with a direct mount wolftooth and issue still there. i have yet to swap pedals to check that.
Can’t say I’ve had any clearance issues, and I run a Stages NDS power meter on mine. Regarding the ticking, check the skewers (if you have a QR model) to make sure they’re tight, and check the headset bearings.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Madone 9 - https://bit.ly/2Nqedbn
Emonda SLR - https://bit.ly/2UK5FP8
Crockett - https://bit.ly/2Xem4sk
Emonda SLR - https://bit.ly/2UK5FP8
Crockett - https://bit.ly/2Xem4sk