Who are you (no off-topic talk please)
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
07stuntin6r
- Posts: 246
- Joined: Mon Aug 08, 2016 2:09 am
by 07stuntin6r on Sun Apr 07, 2019 4:04 am
silvalis wrote:You would probably want to stick to an 11s chain if you're messing with the cassette. A 10s chain is a touch too wide would stick inside a 11s cassette.
Read this thread in regards to mixing "speeds"
viewtopic.php?f=3&t=156324
I got a new sram 11spd chain on there already.
Sent from my iPhone using Tapatalk
-
07stuntin6r
- Posts: 246
- Joined: Mon Aug 08, 2016 2:09 am
by 07stuntin6r on Thu Apr 11, 2019 10:40 pm
coreyaugustus wrote:
That's a good looking saddle. I keep meaning to go test one out.
Thanks, I had the S-Works power arc and liked the power better. Got a good deal and trade in this one.
Sent from my iPhone using Tapatalk
-
07stuntin6r
- Posts: 246
- Joined: Mon Aug 08, 2016 2:09 am
by 07stuntin6r on Thu Apr 11, 2019 10:41 pm
Well was gonna plunge and put an order for the new Aerofly 2 bars but out of stock until June. Any other recommendations? Looking at the zipp sl70 aero or maybe Easton ec70
Sent from my iPhone using Tapatalk
-
ultyguy
- Posts: 2332
- Joined: Fri Aug 06, 2010 1:35 pm
- Location: Geneva
by ultyguy on Fri Apr 12, 2019 2:06 pm
That’s HOT! need to get a good pic of my pink one up, deserves it. I’m really impressed with mine, super handling and the acceleration is addictive.
Sent from my iPhone using Tapatalk
-
07stuntin6r
- Posts: 246
- Joined: Mon Aug 08, 2016 2:09 am
by 07stuntin6r on Thu Apr 18, 2019 1:38 am
Alright I’m in the market for a power meter. Got S-Works cranks as you can see so I was looking at the Quarq spider which I’ve found for 799 which seems steep and it sure If it’s a better investment. Also interested in the sram red crankset power meter. Wanting to stay with bb30 unless other options are better. Are there any other good options around 1k or so? Don’t want to do the power tap hub either.
Sent from my iPhone using Tapatalk
-
07stuntin6r
- Posts: 246
- Joined: Mon Aug 08, 2016 2:09 am
by 07stuntin6r on Sat May 04, 2019 1:10 pm
Just got a used SLSpeed stem to replace my zip sprint. Think the length was a little too long for me and the extra 12degree drop was as well.
Got pictures of the stem I am a little worried if the little cracks or what not will be an issue. Didn’t notice them and it was not disclosed when I bought it online. I did press and jerk on it all 200lbs of me and it held up. They don’t seem to be dee just the outside....but it is near where the bolts are so could be a result of prior user over torquing.
Sent from my iPhone using Tapatalk
-
mattr
- Posts: 4671
- Joined: Fri May 25, 2007 6:43 pm
- Location: The Grim North.
by mattr on Sat May 04, 2019 1:17 pm
You've bought a cracked, second hand, carbon stem?
I'd have sent it back before fitting it.
According to the seller, you cracked it.
-
07stuntin6r
- Posts: 246
- Joined: Mon Aug 08, 2016 2:09 am
by 07stuntin6r on Sat May 04, 2019 2:06 pm
mattr wrote:You've bought a cracked, second hand, carbon stem?
I'd have sent it back before fitting it.
According to the seller, you cracked it.
Like I said I was cracked without my knowledge and he is aware because I’ve spoken to him. I’m just curious if it will be an issue they way it is. While tightening I didn’t hear any noise when I Tq’d to 6nm
Sent from my iPhone using Tapatalk
-
mattr
- Posts: 4671
- Joined: Fri May 25, 2007 6:43 pm
- Location: The Grim North.
by mattr on Sat May 04, 2019 7:06 pm
07stuntin6r wrote: ↑Sat May 04, 2019 2:06 pm
I’m just curious if it will be an issue they way it is.
Almost guaranteed to cause a problem at some point.
Ands it's *really* somewhere i wouldn't want a failure.