maybe i have smaller tube
custom Scott Scale 700 RC 6.630g
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I also have run the rear brake internally. I did open up the headtube hole, just big enough for the bare brake hose, but the stop is still ok to use say a 4mm deraileur hose and end cap if needed. At the bottom bracket I ran the hose out of what was the front mech cable guide port, I am running a x1 so I cut the plastic cable guide in half, I may still open or at least champfer the hole to get a smoother run on the cable to the rear stay or use the drainport hole. I would have liked to do a full internal run to a new exit port on the chainstay but it would have involved a little too much carbon work.
Apart from Kai's great mods there is also this chap (https://www.facebook.com/pg/lightbikesisrael/photos/) who has done a couple of great internal mods both rear brake and deraileur.
http://imgbox.com/g/pwZdZuyf9E
Apart from Kai's great mods there is also this chap (https://www.facebook.com/pg/lightbikesisrael/photos/) who has done a couple of great internal mods both rear brake and deraileur.
http://imgbox.com/g/pwZdZuyf9E