BMC Teammachine SLR01 (2018) 5.94kg

[bilwit]

Updated 07/09/2020: viewtopic.php?f=10&t=147890&p=1584235#p1584235
BMC Teammachine SLR01 (2018)



FRAMESET: BMC SLR01 (2018) Size 54, Kogel BB86 to DUB
GROUPSET/DRIVETRAIN: DA9150, 53x36 Carbon-Ti, Quarq DZero 170mm, KMC X11SL Gold Chain
BRAKES: Cane Creek Direct Mount G4 eeBrakes
WHEELSET 1 (pictured): Light Bicycle R45T (Carbon-Ti), Veloflex Roubaix, BDop Steel 11-28
WHEELSET 2 : Light Bicycle R65T (Carbon-Ti), Veloflex Arenberg, Ultegra 11-28 cassette)
BAR-STEM: Bontrager Aeolus RSL VR-C Handlebar 380mm x 110mm
SADDLE: Alpitude Gardena 128mm 3K, Darimo BMC SLR01 D-shape seatpost
COCKPIT, etc: Extralite Ultrastar 3 (6g), KAPZ headcap
QUICK RELEASE: J&L Ti Bolt-on
FINISHING KIT: Elite Vico Carbon bottlecage, Alpitude carbon chain catcher, Jagwire Elite Link cabling, Tesa 56108 tape
PEDALS: Speedplay Zero, Toronto Cycles Ti Spindles/Bowties


WEIGHTS (including x1 bottle cage, mount, headunit, pedals):
Wheelset 1 (45mm): 5.94kg
Wheelset 2 (65mm): 6.11kg

FRAMESET: BMC SLR01 (2018) Size 54, C-Bear PF4130 BB
GROUPSET: DA9150, 52x36 Praxis, Rotor 3D+ 170mm w/ Power2Max NG Eco, KMC X11SL Gold Chain
BRAKES: Cane Creek Direct Mount G4 eeBrakes
WHEELSET 1: Light Bicycle R55/R65 (Industry Nine Torch hubs), Continental GP5000 23mm, Vittoria Latex Tubes, Velox 19mm tape, Ultegra 11-28 cassette
WHEELSET 2 (pictured): Light Bicycle R45T (Carbon-Ti tubs, Veloflex Roubaix, BDop Steel 11-28 cassette)
STEM: Extralite Hyperstem -12° 120mm
SADDLE: Berk Lupina (padded, oval rails), Darimo BMC SLR01 D-shape seatpost
HANDLEBARS: ENVE Aero SES
COCKPIT, etc: Extralite Ultrastar 3 (6g), KAPZ headcap, 5mm Cillos Spacer (1g), Alptitude Stelvio v2 (Extralite Hyperstem)
QUICK RELEASE: J&L Ti Bolt-on
FINISHING KIT: Elite Vico Carbon bottlecage, Alptitude carbon chain catcher, Jagwire Elite Link cabling, Lizardskin DSP v2 1.8mm black bar tape
PEDALS: Speedplay Zero, Toronto Cycles Ti Spindles/Bowties


WEIGHTS (including x1 bottle cage, mount, headunit, pedals):
Wheelset #1: 6.625kg
Wheelset #2: 6.200kg

FRAMESET: BMC SLR01 (2018) Size 54, integrated fork/seatpost/headset, C-Bear PF4130 BB
GROUPSET: DA9070, 53x36 Rotor 3D+ 170mm w/ Power2Max NG Eco, KMC X11SL Gold Chain
BRAKES: Cane Creek Direct Mount G4 eeBrakes
WHEELSET 1: Light Bicycle R35/R45 (grooved brake track, Industry Nine Torch hubs), Continental GP4000SII 23mm, Continental Race Light Tubes, BDop Steel cassette)
STEM: Extralite Hyperstem -12° 120mm
SADDLE: Berk Lupina (padded, oval rails)
HANDLEBARS: ENVE Aero SES
COCKPIT, etc: Extralite Ultrastar 3 (6g), KAPZ headcap, 5mm Cillos Spacer (1g), Raceware Wahoo Elemnt ENVE Aero Bar Mount
QUICK RELEASE: J&L Ti Bolt-on
FINISHING KIT: Elite Custom Race bottlecage, Alptitude carbon chain catcher, Jagwire Elite Link cabling, Lizardskin DSP 1.8mm black bar tape
PEDALS: Speedplay Zero, Toronto Cycles Ti Spindles/Bowties [/list]

TOTAL WEIGHT (including x1 bottle cage, mount, headunit, pedals): 6.54kg

[list]
FRAMESET: BMC SLR01 (2018) Size 54, integrated fork/seatpost/headset, C-Bear PF4130 BB
GROUPSET: DA9070, 53x36 Rotor 3D+ 170mm w/ Power2Max NG Eco
WHEELSET: Light Bicycle R55/R65, Veloplugs, Continental GP4000SII 23mm, Vittoria Latex Tubes, CS-9000 cassette
STEM: Extralite Hyperstem -12° 120mm
SADDLE: Berk Lupina (padded, oval rails)
HANDLEBARS: ENVE Aero SES
COCKPIT, etc: Extralite Ultrastar 3 (6g), KAPZ headcap, 5mm Cillos Spacer (1g), Raceware Wahoo Elemnt ENVE Aero Bar Mount
QUICK RELEASE: View-Speed Series 4 Skewers
FINISHING KIT: Elite Custom Race bottlecage, Alptitude carbon chain catcher, Jagwire Elite Link cabling, Lizardskin DSP 1.8mm black bar tape
PEDALS: Speedplay Zero, Toronto Cycles Ti Spindles/Bowties [/list]

TOTAL WEIGHT (including x1 bottle cage, mount, headunit, pedals): 6.89kg

FRAMESET: BMC SLR01 (2018) Size 54, integrated fork/seatpost/headset, CeramicSpeed BB86 Shimano (Total: 1.62kg)
GROUPSET: DA9000 mechanical, 170mm crankset, 52x36 Osymetric chainrings (169.4g), Stages power meter
WHEELSET 1: FLO45, Veloplugs, Vittoria Corsa G+ 23mm/25mm, CS-9000 cassette (Front Total: 0.99kg, Rear Total: 1.33kg)
WHEELSET 2 (pictured): IMUST 40mm, Continental GP4000SII 23mm, CS-9000 cassette, Velox rim tape, Mr Tuffy Ultra Lite tire liner
STEM: Kalloy UNO -17D 110mm
SADDLE: Fizik Arione R1 (145.00g)
HANDLEBARS: Fizik Cyrano Chameleon 40cm (180.50g)
COCKPIT, etc: Extralite Ultrastar 3 (6g), KAPZ headcap, 5mm Cillos Spacer (1g), Raceware Wahoo Elemnt Bar Mount (17g)
QUICK RELEASE: Extralite Streeters (29g)
FINISHING KIT: Elite Custom Race bottlecage, Osymetric chain catcher, Jagwire Elite Link cabling, Absoluteblack chainring bolt covers
PEDALS: Speedplay Zero, Toronto Cycles Ti Spindles/Bowties [/list]

TOTAL WEIGHT (including x1 bottle cage, mount, headunit, pedals): 6.72kg

US Roundel headcap, bar tape all the way to the stem, and Osymetric rings are nods to the king of cool (no, not Froome ). Didn't really make any particular WW choices outside of the expander plug, QR, and Speedplay mods so I'm content with sitting around the UCI limit.

[bilwit]

(deleted)

[TonyM]

Sorry for the terrible pics, no fancy camera for me

BMC Teammachine SLR01 (2018)
TOTAL WEIGHT (including x1 bottle cage, mount, headunit): 6.775kg

US Roundel headcap & Osymetric rings are nods to the king of cool (no, not Froome ). Didn't really make any particular WW choices outside of the expander plug and quick release. Could have gone WW with the stem since I have a couple Hyperstems lying around but I quite like the girth of the BMC stem and it puts its position not far off from my steel bike.




SLR01 Frame Sz54+Fork+Seatpost+Headset 1.62kg
SLR01 Mechanical Stem 163.70g
Osymetric 52x36 169.4g
Fizik Arione R1 145.00gg
Fizik Cyrano Chameleon 40cm 180.50g
FLO45+Veloplugs+Continental Grand Prix 4000 SII 23mm (front)
FLO45+Veloplugs+Continental Grand Prix 4000 SII 23mm (rear)
Extralite Ultrastar 3 ~6g
Extralite Streeters quickrelease ~29g
Raceware Wahoo Elemnt Bar Mount 17g
Wahoo Elemnt Bolt 60.6g
Elite Custom Race bottlecage
Speedplay w/ Ti spindles&bowties from Toronto Cycles
Fizik Performance bar tape
Jagwire Elite Link
DA9000 mechanical w/ 170mm crankset
Stages power meter

Looks very clean! Love it !

[Yetiunio]

I'm not big fan of steel, but your BMC looks amazing! Is the frame white, or this is more light grey colour?

[bilwit]

I'm not big fan of steel, but your BMC looks amazing! Is the frame white, or this is more light grey colour?

white!

[Yetiunio]

white!

Better than! Very nice!

[exFictitiouZ]

absolutely love the colour scheme. red and white.

(although I fully understand that white paint is the ultimate antithesis of WW, but....)

[muffinman]

Dang these are cool. I want a steel road bike one day

[bilwit]

Here's my winter setup and some details.



WINTER SETUP (CHANGES)

• FENDERS: Planet Bike Cascadia ALX (rear), SKS Raceblade (front); both with rainydaybiking mudflaps
• STEM: Deda Pista (gloss) 110mm
• HANDLEBARS: Fizik Cyrano Snake 40cm
• WHEELSET: Boyd Altamont Lite Ceramic w/ Mr Tuffy Ultra Lite tire liner
• CASSETTE: Shimano 6800 Ultegra 11-Speed Cassette, 11-28T
• CHAIN: Shimano Ultegra/XT CN-HG701
• CABLING: Jagwire Elite Link

TOTAL WEIGHT (including mount, headunit, pedals): 8.350kg

Around 8.7kg with saddlebag and lights. It's a whale but can't really complain about the fender coverage and alloy braking surface. The shallow rims are very much appreciated--I've taken it out in some insane storms with 45kmph+ winds and downpour and the handling was as good as I could ask for. Ceramic coating on the rear wheel is almost completely gone at this point.. hydraulic disc brakes sounds very appealing right about now.

[Mtek]

BMC looks so clean in white, love it.

[TonyM]

Not sure if you know but BMC has a low head cone for the Roadmachine (instead of the high head cone that you have in your Roadmachine) so that you have a lower stack and a cleaner look if you don’t want any spacer and a slammed stem. Look at mine in the same section. I have the low head cone and no spacer.

[bilwit]

Not sure if you know but BMC has a low head cone for the Roadmachine (instead of the high head cone that you have in your Roadmachine) so that you have a lower stack and a cleaner look if you don’t want any spacer and a slammed stem. Look at mine in the same section. I have the low head cone and no spacer.

You mean Teammachine? I might try a -12 or -17 stem (the native BMC one is -6) before I look into the headset top cone thing but I'm actually quite happy with the position so far

[TonyM]

Not sure if you know but BMC has a low head cone for the Roadmachine (instead of the high head cone that you have in your Roadmachine) so that you have a lower stack and a cleaner look if you don’t want any spacer and a slammed stem. Look at mine in the same section. I have the low head cone and no spacer.

You mean Teammachine? I might try a -12 or -17 stem (the native BMC one is -6) before I look into the headset top cone thing but I'm actually quite happy with the position so far

Oh sorry I meant for the Roadmachine and you have a Teammachine. I don’t know if the Teammachine has different head cones.

You could try with a - 10 first (Pro Vibe stem)

[survivor]

What is the stem length on your TeamMachine?

[bilwit]

What is the stem length on your TeamMachine?

it came with a 110mm @ -6 degree stem