16-year-olds Cannondale Supersix Evo 2015

Who are you (no off-topic talk please)

Moderator: Moderator Team

jobvisser
Posts: 78
Joined: Sun Aug 14, 2016 10:24 am

by jobvisser

weight will follow
Image
Image
Image
Upgrades to do
1. New stem, could go with a Kalloy which will save about 60 Grams
2. Carbon bars (thinking about secondhand Syntace Racelite for €70) will save 90 grams
3. New expander (standard cannondale is 50 grams) thinking about the lighter 16 gram version
4. Sram red/ cannondale hollowgram crank
5. Continental supersonic innertubes
6. Continental GP 4000 S II


Found the original bike online , it was hung up in a garage on a bike rack and the pictures were really poor quality ,after some research i found out it was build up with shimano 105 and cannondale C3 components. i overbid some one with €1 and could come pick it up the same day. Turned out the bike belonged to the owner's brother , who passed away because of cancer. it was barely ridden and i couldn't find one scratch. Changed all the parts with sram force that i had on my six13 and sold the six13 with €100 profit.


Will be updated/tuned
Last edited by jobvisser on Tue Jun 27, 2017 8:41 pm, edited 1 time in total.

jobvisser
Posts: 78
Joined: Sun Aug 14, 2016 10:24 am

by jobvisser

Added pictures, will try to weigh it next week. would like to hear where i can upgrade without spending too much

User avatar
Tomstr
Posts: 572
Joined: Tue Oct 04, 2011 5:04 pm

by Tomstr

Lekker bezig!

Vredestein latex doet het goed qua gram/€. Mantel.com heeft ze wel liggen. :-)
Ride it like you stole it

User avatar
Asteroid
Posts: 216
Joined: Tue Jul 26, 2016 8:43 pm
Location: Los Angeles, California

by Asteroid

Fun, cool project for you. Imagine you paid less than $1,500.
Little bit confused by saying you put Force on, but the build list indicates Red.
And perhaps you went from 11sp to 10sp?
Guessing current total weight falls between 7 to 8 kg.
You can find one of those inexpensive hanging scales for $15 on Amazon.
Oldbie

jobvisser
Posts: 78
Joined: Sun Aug 14, 2016 10:24 am

by jobvisser

Tomstr wrote:Lekker bezig!

Vredestein latex doet het goed qua gram/€. Mantel.com heeft ze wel liggen. :-)


Altijd handig zo'n stikker, zijn conti supersonics niet handiger omdat ik dan niet elke dag hoef te pompen ?


Asteroid wrote:Fun, cool project for you. Imagine you paid less than $1,500.
Little bit confused by saying you put Force on, but the build list indicates Red.
And perhaps you went from 11sp to 10sp?
Guessing current total weight falls between 7 to 8 kg.
You can find one of those inexpensive hanging scales for $15 on Amazon.


i paid 550 for the bike which surpisingly came with a tacx home trainer(sold for €50) , a pair of sidi shoes(sold for €45) , ultegra pedals (sold for €35) and a giro atmos helmet which i kept.
brings the cost down to €420. i sold my old bike (six13) with all the 105 and C3 parts for 550 which makes a €130 profit. Then i bought a €300 sram red group on Ebay and gave my dad the crankset. i bought the wheelset for €250 (it's build by one of the best in our country) . The force group went to my sister's bike.

I am trying to get it to get the weight below 6Kg without spending more than €600

User avatar
Tomstr
Posts: 572
Joined: Tue Oct 04, 2011 5:04 pm

by Tomstr

Ik kan je foto's niet zien maar ik ga er van uit dat je een naamsticker met vlag op je fiets hebt. ;-)

Conti superlight kan ook maar gaat snel lek is mijn ervaring. Over de Vredestein binnen banden ben ik erg tevreden. De spanning checken moet toch voor je gaat rijden, met of zonder latex.
Ride it like you stole it

Tom06
Posts: 74
Joined: Sat Oct 31, 2015 8:42 pm

by Tom06

It's nice but where are the pictures? :mrgreen:

jobvisser
Posts: 78
Joined: Sun Aug 14, 2016 10:24 am

by jobvisser

Tom06 wrote:It's nice but where are the pictures? :mrgreen:

should be visible now... google drive somehow didnt work...

Something things i could use some advice one.

I have this "clicking" pf30 BB again . it started creaking with the original cannondale bearings so i installed a new Sram pf30 BB in it,
i did use loctite 609 but didn't use the recommended Primer.
it was click free for 25km and then i started again. i would really like to fix this but i dont know if using the primer on with a new sram BB .
i did hear some good things about the token fusion BB, should i try that one of just buy a threaded one directly ?
Image

. right now im using a normal 5mm instead of a 15mm conical spacer that came with my bike, i Want to get a 7mm Conical spacer because i find lower more comfortable, but i cant really find them online. anyone can give me a link to one ?

Tom06
Posts: 74
Joined: Sat Oct 31, 2015 8:42 pm

by Tom06

Indeed with pics its much better!
You talk about the spacer of headset?

jobvisser
Posts: 78
Joined: Sun Aug 14, 2016 10:24 am

by jobvisser

Tom06 wrote:Indeed with pics its much better!
You talk about the spacer of headset?

jup,i want the same as this one but lower
Image

jobvisser
Posts: 78
Joined: Sun Aug 14, 2016 10:24 am

by jobvisser

oops

dudemanppl
Posts: 721
Joined: Fri Feb 22, 2013 5:09 am

by dudemanppl

Jesus please fix the bar/shifter angle!

glam2deaf
Posts: 671
Joined: Mon Apr 27, 2015 4:36 am

by glam2deaf

Looks like the shifters are in the right place? Just need to rotate the bars up a bit. Unless you're Bardet...

Image
:lol:

JScycle
Posts: 148
Joined: Wed Mar 08, 2017 11:41 pm

by JScycle

glam2deaf wrote:Looks like the shifters are in the right place? Just need to rotate the bars up a bit. Unless you're Bardet...

Image
:lol:


I'm assuming that is temporary until he gets a slammed stem

jobvisser
Posts: 78
Joined: Sun Aug 14, 2016 10:24 am

by jobvisser

JScycle wrote:
glam2deaf wrote:Looks like the shifters are in the right place? Just need to rotate the bars up a bit. Unless you're Bardet...

Image
:lol:


I'm assuming that is temporary until he gets a slammed stem

jup, find it more comfortable. need to get a -17 degree stem or a smaller frame

Post Reply
  • Similar Topics
    Replies
    Views
    Last post