Cervelo S2 DA Di2

Who are you (no off-topic talk please)

Moderator: Moderator Team

CodeineCowboy
Posts: 2
Joined: Wed Jun 21, 2017 3:29 am

by CodeineCowboy

Damn that looks clean.... did you run the Di2 wires with the rear brake cable? Any tips for running the Di2 wires on a S2 frame? Looking to build a S2 with the new 9150 group. I assume the battery fits in the seat tube? Nice work

Kumppa
Posts: 194
Joined: Mon Oct 13, 2014 10:05 am

by Kumppa

That cockpit... Superb.

by Weenie


Beancouter
Posts: 393
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

Correct - The cable has been run with the rear brake cable (with another cable connecting the levers, and another from a shifter to the bar end plug). The main issue is battery location - i have dropped it in the seat tube with a withdrawal strap attached to it so I can pull it out (slightly nervous about dropping stuff into a frame!!£.. I did buy the di2 adaptor for the s5 but was too much hassle to make It worth the effort. I will take a look at the new 2017 seatpost at some point to see if it is easier.


Sent from my iPhone using Tapatalk

cunn1n9
Posts: 103
Joined: Sat Jan 15, 2011 1:24 am

by cunn1n9

Beancouter wrote:Correct - The cable has been run with the rear brake cable (with another cable connecting the levers, and another from a shifter to the bar end plug). The main issue is battery location - i have dropped it in the seat tube with a withdrawal strap attached to it so I can pull it out (slightly nervous about dropping stuff into a frame!!£.. I did buy the di2 adaptor for the s5 but was too much hassle to make It worth the effort. I will take a look at the new 2017 seatpost at some point to see if it is easier.


Sent from my iPhone using Tapatalk


Did you have to drill a hole to feed the di2 cable in near the rear brake cable? I had the same thing done in my s5. Small hole a small price to pay for a much tidier setup. No idea why cervelo does route this way and provide the hold themselves.


Sent from my iPhone using Tapatalk

Beancouter
Posts: 393
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

No managed to slip it behind the plastic cable stop


Sent from my iPhone using Tapatalk

mr.wulf
Posts: 4
Joined: Sat Jun 23, 2007 9:43 pm

by mr.wulf

I love that build!

Are you running 25mm Conti GP 4000II on your wheelset? Does the S2 frame and fork have enough clearance to run them?
By chance do you know the inner widht of your rims?

Thanks a lot!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post