Cervelo S2 DA Di2
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
- Posts: 2
- Joined: Wed Jun 21, 2017 3:29 am
Damn that looks clean.... did you run the Di2 wires with the rear brake cable? Any tips for running the Di2 wires on a S2 frame? Looking to build a S2 with the new 9150 group. I assume the battery fits in the seat tube? Nice work
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 1090
- Joined: Fri Apr 20, 2012 9:04 pm
Correct - The cable has been run with the rear brake cable (with another cable connecting the levers, and another from a shifter to the bar end plug). The main issue is battery location - i have dropped it in the seat tube with a withdrawal strap attached to it so I can pull it out (slightly nervous about dropping stuff into a frame!!£.. I did buy the di2 adaptor for the s5 but was too much hassle to make It worth the effort. I will take a look at the new 2017 seatpost at some point to see if it is easier.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Beancouter wrote:Correct - The cable has been run with the rear brake cable (with another cable connecting the levers, and another from a shifter to the bar end plug). The main issue is battery location - i have dropped it in the seat tube with a withdrawal strap attached to it so I can pull it out (slightly nervous about dropping stuff into a frame!!£.. I did buy the di2 adaptor for the s5 but was too much hassle to make It worth the effort. I will take a look at the new 2017 seatpost at some point to see if it is easier.
Sent from my iPhone using Tapatalk
Did you have to drill a hole to feed the di2 cable in near the rear brake cable? I had the same thing done in my s5. Small hole a small price to pay for a much tidier setup. No idea why cervelo does route this way and provide the hold themselves.
Sent from my iPhone using Tapatalk
-
- Posts: 1090
- Joined: Fri Apr 20, 2012 9:04 pm
No managed to slip it behind the plastic cable stop
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sorry for the necropost. Would you mind taking a closeup picture of how you did this please. I'm hoping you have the same cable stops as my R3 and I would like to do this.Beancouter wrote:No managed to slip it behind the plastic cable stop
Sent from my iPhone using Tapatalk
Thanks!
David
Sent from my ONEPLUS A6003 using Tapatalk