New to me CAAD10 ..aka Super 10

Who are you (no off-topic talk please)

Moderator: Moderator Team

Post Reply
Posts: 119
Joined: Wed Dec 30, 2015 4:04 pm

by gtinut

I finaly took it for a spin.
I got frame set from a friend who had for about ayear. Originaly was 105 version with ugly paint job. Now it is "naked" ...hard coat annodized and fork coverwd with matte UV clear.
Frame: Caad10 54cm
Fork: Dale carbon
Levers: Red
Brakes: Red
F/R Der: Red
Cranks: Red 172.5
Rings: Sram 52/36 or aBlack 52/36
Chain: Red
Handlebar: Thomson carbon 420mm
Stem: 3T 120mm
Spacer: Soul Kozak
Bar tape: Fizik Performance
cable: Jagwire Link
Seatpost clamp: SoulKozak with shim between frame and clamp
Seatpost: Performance Elite carbon 27.2x350 - 148g
Saddle: SQlab Ergowave 12cm - 148g
wheels: SoulKozak, Boyd Altamont Lite, CX-ray 24/28 - 1540g
Pedals: Time Xpresso 10
tires: Hutchinson Fusion5 allseason 25 (tubeless)

The final weight is about 6.7kg I will try to find notes with weights of some of the parts.

sent from Earth via tapatalk
Last edited by gtinut on Mon Feb 27, 2017 8:09 pm, edited 2 times in total.

by Weenie

Posts: 80
Joined: Sat Jan 07, 2017 2:49 am

by Sizzler

Well done, looks just like a black inc. Got any more details on the anodizing and fork work? Any better photos?

Posts: 119
Joined: Wed Dec 30, 2015 4:04 pm

by gtinut

I stripped frame by myself but found many imperfections. I tried wet sanding main tubes and before dropping it for hard coat - soda blasted it myself with medium grit.
Welds have little different shade with is normal. Fork was razor bladed. Cut length was around 380g without paint. I put 4 very light coats of Krylon UV resistant matte clear.
I will try to take some close up pictures.

Posts: 88
Joined: Fri Feb 10, 2017 8:48 pm
Location: Geneva, IL, USA

by gsindela

Looks fantastic!
2015 Storck Scenero G3, Force 22, Ultegra wheels, Zipp AL bars, stem, post

Posts: 108
Joined: Thu Oct 06, 2016 2:26 am
Location: SFL

by FLtrooper

Looks great!


Post Reply
  • Similar Topics
    Last post