Kayrehn Fuji SL 1.1

[mythical]

I can use a stem upgrade though *hint hint*

Noted! Would you like a skewer upgrade with QR levers with that?

[2focused]

What made you go for wi-fli while running 11-26?

[Kayrehn]

What made you go for wi-fli while running 11-26?

I wrecked my previous short cage and thought I'll get the Wifli for versatility. 11-26t is for local usage, for overseas trips I'll slap on a 11-32. Going to the Pyrenees next month! [emoji2]

[Kayrehn]

Since the build 'ended' a while back, didn't thought I'll change any components any more. But then I chanced upon a reasonably cheap pair of Tune Skyline skewers on ebay and Bike24 had a sale on the Time Xpresso 15, so.

Weight of bike is now 4.91kg! 50g off on the pedals alone is really nice. I'll try to be real careful with walking on the Time cleats though.

Now, the only thing I still look forward to is a Wert stem... That will bring it down to maybe 4.88kg, if it ever happens...

Sent from my SM-G930F using Tapatalk

[godo]

Hi. Im buying carbonice eva 2.0 31.8 clamp for my fuji sl
But it is not tightening for my seatpost.
Can you help me?
If you can please take picture seatpost clamp and seat tube
Um...Your eva 2.0 is custom made product?

[Kayrehn]

Hey I bought it off Starbike and it works well for me. Maximum torque is 4nm but 3.5nm should be enough, from an email reply by Carbonice.

Sent from my SM-G930F using Tapatalk

[rexyi1990]

Hey, what's this line on the down tube? something to worry about?

No, that is very normal carbon layer, don't worry.

[rexyi1990]

Hey I bought it off Starbike and it works well for me. Maximum torque is 4nm but 3.5nm should be enough, from an email reply by Carbonice.

Sent from my SM-G930F using Tapatalk

Hey, it's exactly the same situation as mine, and no problem for that.

[godo]

Hey I bought it off Starbike and it works well for me. Maximum torque is 4nm but 3.5nm should be enough, from an email reply by Carbonice.

Sent from my SM-G930F using Tapatalk

Thankyou.
It is strange.
Why can not I do it?
If you have a vernier caliper, can you measure the size?

[Kayrehn]

Oh I just realised, I think this frame fits a 27.2mm seatpost, not 31.8.

Sent from my SM-G930F using Tapatalk

[godo]

Oh I just realised, I think this frame fits a 27.2mm seatpost, not 31.8.

Sent from my SM-G930F using Tapatalk

Yes I know that seatpost size.

And i mesure seat tube size is 30.4mm!

[rexyi1990]

NICE JOB! What is the bar end?

[RyanH]

He got them 3D printed.

@Kayrehn
Can you snap a level side shot so I can see the bar profile? I'm waffling between Schmolke and Haero and prefer my drops to be level with the ground. Schmolke seems to be very similar to Ergonova which means I'll have goofy looking bars but Haero looks like it may be able to look correct.

[Delorre]

Schmolke seems to be very similar to Ergonova which means I'll have goofy looking bars

Take a look at the newer superergo bars. They finaly updated the geometry to something very nice. You can see what it looks like in one of the recent c64 build threads over here

[Fiery]

There are some good side-shots of the Haero bar in jvanv8's thread here. Not the SL version, but same reach/drop spec, looks like the same shape.