Werking cycles prototypes

Who are you (no off-topic talk please)

Moderators: MrCurrieinahurry, maxim809, Moderator Team

Post Reply
stevec1975
Posts: 553
Joined: Tue Nov 24, 2009 12:37 pm
Location: London

by stevec1975

it looks great, does it only fit to one side of the 2 bolts on the bottom half of the stem? i.e. you usual one of the existing bolts and the 35 long one you supply?

User avatar
Werking
in the industry
Posts: 150
Joined: Sat Oct 03, 2015 11:34 am
Location: Trentino, Italy
Contact:

by Werking

@Stevec1975 thanks! No only one screw. In the box there is also the titanium screw. You have to replace the stem screw with our titanium 35 mm lenght screw.


In the Pic there is what you will you have in the shipping box

Also some boxes are almost ready to be shipped[emoji3]ImageImage

Inviato dal mio A0001 utilizzando Tapatalk
http://werking.cc - Handcrafted bicycles - Made in Italy



http://alpitude.cc - bike components

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
Werking
in the industry
Posts: 150
Joined: Sat Oct 03, 2015 11:34 am
Location: Trentino, Italy
Contact:

by Werking

If you follow me on instagram, probably you have just seen this new prototype of hardtail front. The project is for a customer that would like to have a custom MTB frame, 26". Yes, it's correct 26 inches [emoji16]

ImageImageImage

Inviato dal mio A0001 utilizzando Tapatalk
http://werking.cc - Handcrafted bicycles - Made in Italy



http://alpitude.cc - bike components

syplam
Posts: 90
Joined: Thu Feb 02, 2017 7:30 am

by syplam

Werking wrote:If you follow me on instagram, probably you have just seen this new prototype of hardtail front. The project is for a customer that would like to have a custom MTB frame, 26". Yes, it's correct 26 inches [emoji16]

ImageImageImage

Inviato dal mio A0001 utilizzando Tapatalk


The gloss finish looks really nice in the first picture!!


Sent from my iPhone using Tapatalk

User avatar
Werking
in the industry
Posts: 150
Joined: Sat Oct 03, 2015 11:34 am
Location: Trentino, Italy
Contact:

by Werking

syplam wrote:
Werking wrote:If you follow me on instagram, probably you have just seen this new prototype of hardtail front. The project is for a customer that would like to have a custom MTB frame, 26". Yes, it's correct 26 inches [emoji16]

ImageImageImage

Inviato dal mio A0001 utilizzando Tapatalk


The gloss finish looks really nice in the first picture!!


Sent from my iPhone using Tapatalk
Yes, I'm collaborate with Tony spray. He makes amazing paintjobs. This paintjob is relative simple. Customer wants a total black body with some red.

Here some other pics.ImageImage

Inviato dal mio A0001 utilizzando Tapatalk
http://werking.cc - Handcrafted bicycles - Made in Italy



http://alpitude.cc - bike components

User avatar
robobiking
Posts: 56
Joined: Fri Nov 27, 2015 3:10 pm
Location: Katwijk
Contact:

by robobiking

Absolutly stunning, Love it that you still made a 26inch bike.
I sure love mine still. :thumbup:
https://robobiking.wordpress.com/
Test & Story Blog for all kind of cycling stuff

Cannondale F600 tuned (9kg)

User avatar
Werking
in the industry
Posts: 150
Joined: Sat Oct 03, 2015 11:34 am
Location: Trentino, Italy
Contact:

by Werking

Thank you robobiking.

Yesterday some new pics about layup of headtube joint for a model S road frame Image

Inviato dal mio A0001 utilizzando Tapatalk
http://werking.cc - Handcrafted bicycles - Made in Italy



http://alpitude.cc - bike components

Johnny Rad
Posts: 2025
Joined: Fri Feb 17, 2006 6:22 am
Location: Zion

by Johnny Rad

Very slick set-up on your new Stelvio out-front mount.

At 15g it's very competitive in weight, but no lighter than RWD. However, your design doesn't require any real estate on the bar and I like that.

Is a lighter 35mm bolt available? Maybe there's not enough weight to be saved there...

Keep posting here and on IG! Keep collaborating with Tony Spray for beautiful paint.

User avatar
sugarkane
in the industry
Posts: 1797
Joined: Wed Jan 19, 2011 11:14 am
Location: SYD
Contact:

by sugarkane

need to arrange some of your bottle cages.. are there options on the finish or graphics??

User avatar
Werking
in the industry
Posts: 150
Joined: Sat Oct 03, 2015 11:34 am
Location: Trentino, Italy
Contact:

by Werking

Johnny Rad wrote:Very slick set-up on your new Stelvio out-front mount.

At 15g it's very competitive in weight, but no lighter than RWD. However, your design doesn't require any real estate on the bar and I like that.

Is a lighter 35mm bolt available? Maybe there's not enough weight to be saved there...

Keep posting here and on IG! Keep collaborating with Tony Spray for beautiful paint.


Yes, the direct competitor are the metal aluminum mounts, that Weights all over 20 grams in the best choice. We prefer to use ti screw for the best quality of strenght, lightness and safety. For this previous reasons we offer only ti screw. We don t want to save an half of grams and perhaps -20% of safety using a ergal screw.

Inviato dal mio A0001 utilizzando Tapatalk
http://werking.cc - Handcrafted bicycles - Made in Italy



http://alpitude.cc - bike components

User avatar
Werking
in the industry
Posts: 150
Joined: Sat Oct 03, 2015 11:34 am
Location: Trentino, Italy
Contact:

by Werking

sugarkane wrote:need to arrange some of your bottle cages.. are there options on the finish or graphics??
No, actually only clear coat glossy, in the next future, very soon, Matt finish. I think that Matt finish is huge on this cage.

Inviato dal mio A0001 utilizzando Tapatalk
http://werking.cc - Handcrafted bicycles - Made in Italy



http://alpitude.cc - bike components

User avatar
Werking
in the industry
Posts: 150
Joined: Sat Oct 03, 2015 11:34 am
Location: Trentino, Italy
Contact:

by Werking

Hey guys! I would like to share last frameset that I have make.

The paintjob is made mixed a metal red with deep metal blue. Paint by Tony spray. The images do not reflect the reality. It's only my opinion but under sunlight the framset is amazing. The fork is Enve 2.0 tapered, Chris king Inset I3.

Sorry but I forgot to weigh it before sending it.

Image

A nice detail of top tube
Image

Image
http://werking.cc - Handcrafted bicycles - Made in Italy



http://alpitude.cc - bike components

Ozrider
Posts: 1018
Joined: Sat Nov 20, 2010 6:06 am
Location: Perth, Western Australia

by Ozrider

Ozrider - Western Australia
Parlee Z5 XL (6055g/13.32lbs) Trek Madone 5.9 (7052-7500g)Jonesman Columbus Spirit (8680g)
Chase your dreams - it's only impossible until it's done

User avatar
Werking
in the industry
Posts: 150
Joined: Sat Oct 03, 2015 11:34 am
Location: Trentino, Italy
Contact:

by Werking

Ozrider wrote:https://cyclingtips.com/2017/11/werking-cycles-model-s-bespoke-carbon-frameset-review/


Sent from my iPad using Tapatalk


Wonderful pics by Matt. It's a old version especially for the routing cable system in BB zone. Actually is without the aluminium holders, less weight and better shifting. Also the disc frameset is ready for the 28 mm tyre, the road is coming an upgrade to suite easily the large tyre (not gravel at the moment, but in the future...).
http://werking.cc - Handcrafted bicycles - Made in Italy



http://alpitude.cc - bike components

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



BmanX
Posts: 3841
Joined: Thu Nov 10, 2005 5:31 pm

by BmanX

following
BIG DADDY B FLOW
AERO & LIGHT is RIGHT for 2 decades

Post Reply