Victoire Cycles - Columbus XCR - Road Bike

[elfuinha]

This one is very nice to look at! I love the frameset! What fork is it? THM?

I would change stem, seatpost, pedals and the crankset (Clavicula SE) - but hey, this is a question of personal preferences and aesthetics...

THM Scapula CT 3k, black decals

[elfuinha]

Final Update and the bike is done:

Ended Ordering this wheels, should be here in the middle of the next month:

Schmolke TLO 45T 24/28 + wheelsmfg Hubs (Alchemy ELF + ORC_UL) + Sapim CX-Ray 2x front and rear.

Sram Red 11-26

Veloflex Arenberg 25 Tubular

[elfuinha]

Should be around 1250g

Enviado do meu SM-G935F através de Tapatalk

[elfuinha]

22528-015_IMG_4598.jpg
22528-012_IMG_4596.jpg3313-0002_IMG_4600.jpg7624-0002_IMG_4602.jpg

Should be around 1250g

Enviado do meu SM-G935F através de Tapatalk

Well and all went to s*#t...

Acording to R2bike there where a problem with one of the rims or both i don't know, and i cancel the deal. To me and R2bike they are still in prototype stage.

Don't know what i'm going to buy, but i'm inclined to the MAVIC Cosmic ultimate 2017

[elfuinha]

It's Finished

Enviado do meu SM-G935F através de Tapatalk

[fa63]

That looks great, well done!

[Fuchspk]

Thats a clean and nice looking bike. I like the colour of that frame with the black parts.
Just do not like the big chainring, i think a thinner one would be better.

[burglarboycie]

Gorgeous bike! I'd second what Fuchspk said about the chainring though.

[Stolichnaya]

So nice. It has a great prototype kinda vibe. The chainring only adds to that vibe as well.

I am on a wait list for a very nice custom steel slated for my wife (not Victoire) and can't decide if the stainless upgrade is worth it or not. It would be great to have a ride report from you once you have some decent kms on that bike.

Really exceptionally executed. Congrats.

[elfuinha]

So nice. It has a great prototype kinda vibe. The chainring only adds to that vibe as well.

I am on a wait list for a very nice custom steel slated for my wife (not Victoire) and can't decide if the stainless upgrade is worth it or not. It would be great to have a ride report from you once you have some decent kms on that bike.

Really exceptionally executed. Congrats.

Many thanks

Enviado do meu SM-G935F através de Tapatalk

[elfuinha]

So nice. It has a great prototype kinda vibe. The chainring only adds to that vibe as well.

I am on a wait list for a very nice custom steel slated for my wife (not Victoire) and can't decide if the stainless upgrade is worth it or not. It would be great to have a ride report from you once you have some decent kms on that bike.

Really exceptionally executed. Congrats.

I've about 1500km on the bike now...

And I can say it rides equal to my Moots Vamoots RSL.

It's about 900g heavier... but it's stiffer on the front triangle... mostly because of the 44mm headtube.

About the normal steel vs stainless...

Stainless is stiffer... rust free... and lighter...

Enviado do meu SM-G935F através de Tapatalk

[romalor]

Hello
I've found a lot of informations bout your frame on victoire website
but can you tell us what diameter and thickness tubing did you choose for the TT ?
The seat tube is the 33 mm from what I can read
The downtube is 38 mm I guess
But I can't tell for the top tube it looks smaller than the seat tube or the shape is different I don't know ... 31,8 or 35 mm ?

thanks

[elfuinha]

Hello

I had to look in the emails

Top Tube: Ref.:   XCRL11600W

If i not mistaken...

It is the W shape from Columbus

Enviado do meu SM-G935F através de Tapatalk

[elfuinha]

31,7mm but horizontal oval shape

Enviado do meu SM-G935F através de Tapatalk

[Wingnut]

It's Finished

20170225_142330.jpg

20170225_142343.jpg

Enviado do meu SM-G935F através de Tapatalk

Still one of my favourites on here!