Canyon Ultimate CF SLX 2015 (new pics page 3)
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
- Posts: 263
- Joined: Sat Apr 26, 2008 4:14 pm
- Location: The Elongated Country
Thanks for all the kind words! Did a short shakedown ride today (sweet spot intervals) and the frame characteristics are spot on, just what I was looking for.
I have considered black Zipp decals, perhaps later.
@ netromsa
50-38 is due to two things:
1. Me not being as fast as I used to be
2. While Sweden is quite flat I want to be able to switch to 34t for trips to the Alps.
I have considered black Zipp decals, perhaps later.
@ netromsa
50-38 is due to two things:
1. Me not being as fast as I used to be
2. While Sweden is quite flat I want to be able to switch to 34t for trips to the Alps.
Current:
S-Works SL8 RTP (build in progress) | Diverge Comp Carbon
Retired:
S-Works SL7 | S-Works Venge | Ultimate CF SLX Mk IV | Ultimate CF SLX Mk III | S5 | R3 | Cento | ...
S-Works SL8 RTP (build in progress) | Diverge Comp Carbon
Retired:
S-Works SL7 | S-Works Venge | Ultimate CF SLX Mk IV | Ultimate CF SLX Mk III | S5 | R3 | Cento | ...
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Hi!
Well done, looks great.
I'm thinking about the same frame, but I'm unsure concerning the size (56 vs 58). I'm 1.83cm, inseam 87cm and my saddle height ist 78cm. Could you please tell me what your measurements are? And how much saddle-handlebar-drop you have (top saddle - top handlebar). Thanks!
Nicolas
Well done, looks great.
I'm thinking about the same frame, but I'm unsure concerning the size (56 vs 58). I'm 1.83cm, inseam 87cm and my saddle height ist 78cm. Could you please tell me what your measurements are? And how much saddle-handlebar-drop you have (top saddle - top handlebar). Thanks!
Nicolas
nbon wrote:Hi!
Well done, looks great.
I'm thinking about the same frame, but I'm unsure concerning the size (56 vs 58). I'm 1.83cm, inseam 87cm and my saddle height ist 78cm. Could you please tell me what your measurements are? And how much saddle-handlebar-drop you have (top saddle - top handlebar). Thanks!
Nicolas
Unless you want a very agressive riding position, I would go for the 58. Take a look at mine. Saddle height is 77 cm with 9,5 cm bar to saddle drop.
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=125560&start=30
Current bikes:
Scott Addict Premium Disc 2018
Scott Addict Orica Greenedge 2015
Retired:
Canyon Endurace CF SLX 2016
Canyon Ultimate CF SLX 2013
Scott Addict Premium Disc 2018
Scott Addict Orica Greenedge 2015
Retired:
Canyon Endurace CF SLX 2016
Canyon Ultimate CF SLX 2013
-
- Posts: 263
- Joined: Sat Apr 26, 2008 4:14 pm
- Location: The Elongated Country
@nbon My saddle height is 78,5cm. I am 186,5cm tall and switched the standard 110mm stem to a 120mm. Can´t measure drop since I don´t have the bike at hand.
Current:
S-Works SL8 RTP (build in progress) | Diverge Comp Carbon
Retired:
S-Works SL7 | S-Works Venge | Ultimate CF SLX Mk IV | Ultimate CF SLX Mk III | S5 | R3 | Cento | ...
S-Works SL8 RTP (build in progress) | Diverge Comp Carbon
Retired:
S-Works SL7 | S-Works Venge | Ultimate CF SLX Mk IV | Ultimate CF SLX Mk III | S5 | R3 | Cento | ...
-
- Posts: 263
- Joined: Sat Apr 26, 2008 4:14 pm
- Location: The Elongated Country
First a couple of pics I had on the camera:
Frame weight including top headset bearing and all hardware (cage bolts, seat clamp, der. hanger).
Uncut fork incl. lower headset bearing
Seatpost
Stem 120mm, which should be lucky it matches the bike perfectly. Otherwise it would go straight off, what a porker...
Frame weight including top headset bearing and all hardware (cage bolts, seat clamp, der. hanger).
Uncut fork incl. lower headset bearing
Seatpost
Stem 120mm, which should be lucky it matches the bike perfectly. Otherwise it would go straight off, what a porker...
Current:
S-Works SL8 RTP (build in progress) | Diverge Comp Carbon
Retired:
S-Works SL7 | S-Works Venge | Ultimate CF SLX Mk IV | Ultimate CF SLX Mk III | S5 | R3 | Cento | ...
S-Works SL8 RTP (build in progress) | Diverge Comp Carbon
Retired:
S-Works SL7 | S-Works Venge | Ultimate CF SLX Mk IV | Ultimate CF SLX Mk III | S5 | R3 | Cento | ...
-
- Posts: 263
- Joined: Sat Apr 26, 2008 4:14 pm
- Location: The Elongated Country
Recently bought a pair of fall/spring wheels. Really like the classics/climber look.
It´s Visions carbon tubular rim (23mm wide and 24mm high) paired to simple hubs and spokes, a Planet X special which I picked up on sale. Claimed weight 1520g.
Shod with 25mm Conti Sprinters. Seemed like a more interesting choice than Fulcrum Racing 3:s or any other middle range alu clincher. I´ll get back with riding impressions.
I have also bought some genuine Zipp all black decals so the fast wheels will also get a makeover.
It´s Visions carbon tubular rim (23mm wide and 24mm high) paired to simple hubs and spokes, a Planet X special which I picked up on sale. Claimed weight 1520g.
Shod with 25mm Conti Sprinters. Seemed like a more interesting choice than Fulcrum Racing 3:s or any other middle range alu clincher. I´ll get back with riding impressions.
I have also bought some genuine Zipp all black decals so the fast wheels will also get a makeover.
Current:
S-Works SL8 RTP (build in progress) | Diverge Comp Carbon
Retired:
S-Works SL7 | S-Works Venge | Ultimate CF SLX Mk IV | Ultimate CF SLX Mk III | S5 | R3 | Cento | ...
S-Works SL8 RTP (build in progress) | Diverge Comp Carbon
Retired:
S-Works SL7 | S-Works Venge | Ultimate CF SLX Mk IV | Ultimate CF SLX Mk III | S5 | R3 | Cento | ...
Love that look! I think the Zipps will look better with the black decals, too. Awesome bike.
Have you thought about taking the Zipp logo's off the wheels? I was hesitant to take my Enve Logo's off for the longest time. Took them off and wish i would have done it so much earlier, especially with the gum wall tires
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com