Moderator: Moderator Team
...and a padded Berk Lupina. I went for the narrow model with the round rails; weight is 85g.
Weight is now back to an OCD pleasing 5.98kg.
....and pics with the new saddle and cage:
Do you know what the actual width of the Vittoria Corsa 25mms?
I'm purchasing this frame an want to know what will actually fit. I'll have a size 52 and some people say that 25s will fit these frames but others don't... Thanks!
JoeFlan wrote:I have a 52cm of the same frame and came to the conclusion that a measured 25mm tire fits in the rear. A measured 26mm fits if you have a stiff rear wheel, but the clearance between the rear chain stays is pretty tight and not worth the extra risk.
Thanks Joe! Seems like this is a good frame to get low weight without breaking the bank!
I didn't measure the Vittorias. However I've just measured the Continentals with a vernier and they are exactly 25mm on the rims. I'd say the Vittorias were very a similar width as the gap to the chainstay looks incridibly similar to how it did with them fitted.
I'm looking for one of the newer Evo frames which have more clearance as currently it seems fine, but it is very close. Will be a good opportunity to swap to a Hi-Mod too.
Being a non-High-Mod built, I’d like to share my thoughts on my brand new 2018 SS-E Dura-ace 9100 (Non-HM) size 54.
Out of the box, without pedals, bottle cage and bar tape, it sits at 6.85kg. I have it complete at 7.2kg with keo classic pedals which is more than I thought it would be since it comes with the Hollowgram carbon clinchers.
I’ll be back here often for my mods!
Height from bottom of rail to top of saddle is 35mm.
Whilst I was measuring I grabbed a few pics to show a few updates I did towards the end of the summer:
- 3t Dorico Ltd post that I stripped the logos and paint off and re-painted with a thin dusting of satin black
- Ti bolts replaced with black Ti bolts
- Similar Topics
- Last post
- 13 Replies
- 2026 Views
Last post by garjo
Mon Oct 02, 2017 5:29 pm
- 1 Replies
- 349 Views
Last post by Wookski
Sat Feb 24, 2018 12:24 am
SuperSix Evo Nano Black Inc. custom build 5.57kg
Last post by Nixster « Tue Oct 10, 2017 9:10 pmReplies: 17
Posted in Introduce Yourself / Gallery - Please use metric weights.by sussexhills » Thu Oct 05, 2017 11:27 am » in Introduce Yourself / Gallery - Please use metric weights.
- 17 Replies
- 3327 Views
Last post by Nixster
Tue Oct 10, 2017 9:10 pm
Going Aero with Cervelo S5 (6.69kg)
Last post by scottmmw « Tue Dec 05, 2017 6:52 pmReplies: 5
Posted in Introduce Yourself / Gallery - Please use metric weights.by gurk700 » Tue Dec 05, 2017 6:56 am » in Introduce Yourself / Gallery - Please use metric weights.
- 5 Replies
- 1513 Views
Last post by scottmmw
Tue Dec 05, 2017 6:52 pm
- 0 Replies
- 1237 Views
Last post by Fishergrad08
Sat Jul 29, 2017 10:14 pm