My Rigid 29er -7690g (16.95 lbs)

Who are you (no off-topic talk please)

Moderator: Moderator Team

Post Reply
Posts: 3844
Joined: Thu Nov 10, 2005 5:31 pm

by BmanX

I have been away from the cycling scene for a while and just getting back to riding after sorting out some back issues for a couple of years. I needed a few projects while I was not riding and here is one of the first ones. I wanted to get a 29er to see how they ride and used some parts that I had laying around so it could be lighter and will be lighter. I had it originally built up with XX disc brakes but they just sucked and needed bleeding every ride so I ditched them for some XO brakes instead.

I do not have the weights for each part but the finished weight is 7690g (16.95 lbs.) I would love to get a Berk seat/post combo for this build. I also have to take off the bars and cranks and sand them down to all black and redo the clear coat after.

Carbon 29er frame and fork.
Stan's Crest ZTR wheelset
KCNC skewers
Eggbeater SS padals
FSA carbon cranks with spiderless 32t chainring
KMC X10SL chain
KCNC foam grips
X0 brakes
Aligator rotars
3 ti, 3 aluminum bolts per rotor
Hylix carbon bars
Omni racer BB
Uno lightweight stem with ti bolts
XX rear derailleur
XX rear shifter
Aligator Mini Shift housing and cable.
Thomson Masterpiece post
Omni racer seat post clamp
Fizik Arione CX Braided saddle (just because I had it)
Rocket Ron tires with I can't remember how much Stan's sealant inside. I had to add some extra to get them to seal correctly.

Pub Pedals (black) on the way as well so I can slip them over the Egg Beaters and ride around in shoes with my kids.


Cervelo SLC 5960g/13.13 lbs

Post Reply
  • Similar Topics
    Last post