2014 Cannondale CAAD 10 (Updated 03/01/16)
Moderators: maxim809, MrCurrieinahurry, Moderator Team
New photos/cassette/cables: Sitting at 7.214kg. Also tidied up the front end a bit using heat shrink tubing and epoxy.
Last edited by rheosibal on Wed Aug 23, 2017 11:27 pm, edited 3 times in total.
Instagram: joserheo
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
The tires are great, haven't seen much mileage (~300mi) since they're not used outside of racing
Instagram: joserheo
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
-
Citizenfox
- Posts: 220
- Joined: Fri Apr 03, 2015 1:22 pm
Such an awesome bike and thread. I'm downgrading too. I'm taking a flat black CAAD10 frame I pikced up to the shop Tuesday. If it checks out they will order an ENVE 2.0 for it then all the parts from my Madone come over - Ultegra, mavic krysium Blacks, Fizik..... I can't tell you how many times I've checked out these pics!
Thanks for the kind words. Awesome build, can't wait to see it although I'd recommend sticking with the stock fork over a 2.0
Instagram: joserheo
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
-
Citizenfox
- Posts: 220
- Joined: Fri Apr 03, 2015 1:22 pm
I see what you're saying and I wouldn't have just replaced it, but I don't have the stock fork. Cannondale recommends the 2.0 as replacement....and it's cool.
Slides right through the given e-wire cable stop. I pm'd you a detailed picture
Instagram: joserheo
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
-
Beancouter
- Posts: 866
- Joined: Fri Apr 20, 2012 9:04 pm
Rheosibal - do you mind posting the pic of the chain stay routing - I have the Di2 fixings but the hole isn't big enough for the e cable- was just going to use a normal grommet but worth checking. Also, in the BB have you don't anything to hold the chain stay e cable away from the crank spindle? Any other tips great fully received - first time Di build!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Beancounter, I can email you a picture. The hole in the provided e-wire grommet for the chain stay is too small. You'll need to drill a hole with a slightly larger diameter and it'll fit right through.
In terms of the BB, the e-wire cables bend between the downtube, seat tube, and chain stay without any cable rub from the spindle. Just make sure they are tucked away neatly in each of the tubes without much play.
Good luck with the build!
In terms of the BB, the e-wire cables bend between the downtube, seat tube, and chain stay without any cable rub from the spindle. Just make sure they are tucked away neatly in each of the tubes without much play.
Good luck with the build!
Instagram: joserheo
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
New training wheels. H-Plus Son TB14, Ultegra 6800, DT Competition (32H, 3 Cross).
Last edited by rheosibal on Wed Jan 13, 2016 5:03 pm, edited 1 time in total.
Instagram: joserheo
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
|| Mosaic RT-1 || Cannondale Evo || Cannondale CAAD10 ||
