Stripping a 1st gen Madone (The ugly)

Who are you (no off-topic talk please)

Moderator: Moderator Team

milroy
Posts: 197
Joined: Wed Feb 04, 2009 5:37 am

by milroy

Following majklnajt’s quest for an early gen Madone, I’ve commenced restoration of my gen 1. (it’s a 56 and no use to him)

The paint was in poor shape and so I had decided some time ago to strip it back and I only recently started that process. Here is what I’ve got.

Image

Image

The carbon is kind of weird. Rather than smooth, it has a fine weave texture similar to linen. This leads me to think that sanding isn’t going to be an option b/c I’ll start eating into the fibres before I have removed all the paint. If I can’t get all the paint off with stripper, I’ll be stuck.

Anyways, I’m actually thinking of leaving it somewhat as it appears in the photos. Kind of like a distressed piece of furniture.
Last edited by milroy on Mon Dec 03, 2012 3:38 am, edited 1 time in total.

User avatar
SWijland
Posts: 853
Joined: Tue Aug 08, 2006 1:41 pm
Location: The Netherlands
Contact:

by SWijland

If I were you I would change the name of the topic to indicate what you are doing, if you want more advice on what you are doing.

Always love people who try to remove the paint off old CF frames. The results are awesome every time IMHO. No sure what the stuff is beneath the paint and the CF, but as far as I can tell it is not carbon, so you should be safe when you remove it by sanding.

User avatar
mellowJohnny
Posts: 484
Joined: Thu Aug 16, 2012 12:56 am
Location: YYZ

by mellowJohnny

^ Agreed. I am by no means a carbon expert, but from what I've read in the past the top "exposed" weave layer is usually cosmetic. You could try to sand it off - you'll then likely be down to the "real" UD carbon of the frame.

artray
Posts: 1365
Joined: Fri Oct 07, 2011 2:08 pm

by artray

That does look a bit odd . If it's painted I don't see the need for a cosmetic layer on top but that is what it looks like. Have you tried using a knife/blade and just cut into the paint and pull it towards you. On my old Trek the paint came off pretty easy using the knife method. Looking at the photo it seems you have already broken the cosmetic layer so you might as well go for it ...good luck :beerchug:

User avatar
LouisN
Posts: 2341
Joined: Mon Feb 19, 2007 3:44 am
Location: Canada

by LouisN

I like the "Mad Max" look of the frame like it is on the first pic :beerchug:

Tat would be a nice aesthetics change from what we are used to see. Lots of "post modernism" influences in there...just add some protection on it.

I suggest you change the title for : "- Look at the custom work Dario Pegoretti did on my Trek frame!!!" ;).

Louis :)

nicrump
Posts: 744
Joined: Thu Oct 23, 2003 5:18 pm
Location: Austin
Contact:

by nicrump

that is a fiberglass scrim. it is used in molding applications sometimes when, for whatever reason, a nice surface cannot be obtained.

User avatar
wilson78
Posts: 120
Joined: Mon Jan 11, 2010 10:49 pm

by wilson78

This could quite cool if done right, something along the lines of the "rat look" that's popular in VW circles.
Making it look really used and abused, but retaining the potential to go surprisingly fast. :thumbup:
My Titanium Lemond (RIP):
viewtopic.php?f=10&t=84352" onclick="window.open(this.href);return false;
The Trek:
viewtopic.php?f=10&t=109635

djay001
Posts: 89
Joined: Thu Dec 22, 2011 3:59 pm

by djay001

I have stripped an old trek 5200 with razor blade and i got this finish on some part of the bike like de BB sheel.

But the rest of the bike was beter, for these part i just wet sand it, and you are going to see these fine weave texture disaper and you will slowly see a nice UD carbon finish.

User avatar
prendrefeu
Posts: 8609
Joined: Wed Oct 31, 2007 10:32 pm
Location: Los Feliz, Los Angeles, California
Contact:

by prendrefeu

Ditto to changing the thread title.
Also, move your topic over to the Road forum where there are a number of people who have done what you are doing.
This is, currently, the Gallery.
Exp001 || Other projects in the works.

User avatar
majklnajt
Posts: 3708
Joined: Thu Apr 10, 2008 6:40 pm
Location: Lenart, Slovenia EUROPE

by majklnajt

Looking fwd to this!! It may motivate me too for something lika that... :thumbup:
Current bike:
TREK Madone ~Remastered~ - FOR SALE

My ex bikes:
TREK Madone 5.9 SL
COLNAGO C50 nl12

munk93
Posts: 408
Joined: Tue Jan 29, 2008 8:20 pm
Location: Denmark

by munk93

I wet-sanded my Madone 07. Still rides great. The "beauty", og fiberglasslayer was also on my bike. That was the layer I sanded down to. I thought it was some micro carbon waving. Off course i couldn't avoid sanding into it, but most of it stayed.

limba
Posts: 956
Joined: Tue Dec 16, 2003 4:24 am

by limba

I was going to say leave it like that. Ride it looking like a mess. At least no one will steal it. :)

oreoboreo
Posts: 509
Joined: Tue Aug 09, 2011 2:25 pm
Location: Aloha, Oregon/ Poipu, Kauai Hawaii

by oreoboreo

It will make a great looking "Rat" bike. as noted like a old Rat rod
Let's finish the ride with a 20% grade.

2011 Scott Addict R1 DA 7900 Matt black
2012 Scott CR1 Pro Ultegra 6700
2015 Specialized SWorks Tarmac Da 9000
2016 Specialized SWorks Tarmac DA 9100

milroy
Posts: 197
Joined: Wed Feb 04, 2009 5:37 am

by milroy

Thanks for the replies.

If I understand correctly, the weave is just an imprint in the surface and can be sanded smooth without damaging the frame?

My OCD nature got the better of me on the weekend and I've stripped off more paint and primer/filler. (I can't stop!)
As someone said, it is scraping off fairly easily. I'm still not really sure what I'm going to do with it.

Image

Image

User avatar
majklnajt
Posts: 3708
Joined: Thu Apr 10, 2008 6:40 pm
Location: Lenart, Slovenia EUROPE

by majklnajt

Awesome!
Did you weigh the frame before starting to strip the paint off? I wonder whats the weight difference?? :)
Current bike:
TREK Madone ~Remastered~ - FOR SALE

My ex bikes:
TREK Madone 5.9 SL
COLNAGO C50 nl12

Post Reply
  • Similar Topics
    Replies
    Views
    Last post