Felt F1 custom paint
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
- Posts: 149
- Joined: Sat Jul 24, 2010 12:11 am
So I picked up a repaired Felt F1 frame in 2021 with the intent to repaint it so thats just what I did! Unfortunately I dont have most of the weights recorded... I really didn't do a good job at getting them all logged. But she comes in at 6.27KG with the spare tube/light.
The frame had a repair on the top tube so the new paint had to cover most of the top tube area. Then the front mech mount was removed and bondo used to fill the area. So that had to get painted to properly cover all the ugly. I got the vinyl graphics from a guy on eBay. A local shop here took all my information then never got back to me, each time I went in they said they would be done soon but never answered my calls or emails. But the ones I got were perfect for what I needed. The first layer of paint was purple/pink that received a layer of glitter. Then the first orange was layed proceeded by another orange. that makes up the bulk of the paint, and the yellow was stencle on top. then a couple layers of clear coat went on. It does save a few sections of the original Hincape graphics.
Frame Felt F1 Hincape 970
Fork Felt F1 Hincape 280
Headset Extralite
seatpost clamp Wolftooth
Seatpost Darimo 27.2 118
Seat Berk 93
Stem Darimo 100mm
Bar Darimo 42cm
Bartape ESI Grips
bottle cages China(replacing)
Outer Cables Jagwire
Inner Cables Jagwire
Brakes EE Brakes
Front derailleur NA
Rear derailleur SRAM Force
Crankset Cannondale SI 420
Bottom Bracket Acer Bearings 44
Chainrings Garbaruk 52t 131
Chainring bolts NA
Chain KMC 12
Shifters SRAM Red W/ Ratio 255
Cassette China 12s 11-34t
Wheels:
hubs Circus Monkey
Spokes Sapim CX Ray
Rims LightBicycle 55mm
Inntertubes RideNow
Tires Continental gp5000 25c
Pedals Time Expresso 15
The frame had a repair on the top tube so the new paint had to cover most of the top tube area. Then the front mech mount was removed and bondo used to fill the area. So that had to get painted to properly cover all the ugly. I got the vinyl graphics from a guy on eBay. A local shop here took all my information then never got back to me, each time I went in they said they would be done soon but never answered my calls or emails. But the ones I got were perfect for what I needed. The first layer of paint was purple/pink that received a layer of glitter. Then the first orange was layed proceeded by another orange. that makes up the bulk of the paint, and the yellow was stencle on top. then a couple layers of clear coat went on. It does save a few sections of the original Hincape graphics.
Frame Felt F1 Hincape 970
Fork Felt F1 Hincape 280
Headset Extralite
seatpost clamp Wolftooth
Seatpost Darimo 27.2 118
Seat Berk 93
Stem Darimo 100mm
Bar Darimo 42cm
Bartape ESI Grips
bottle cages China(replacing)
Outer Cables Jagwire
Inner Cables Jagwire
Brakes EE Brakes
Front derailleur NA
Rear derailleur SRAM Force
Crankset Cannondale SI 420
Bottom Bracket Acer Bearings 44
Chainrings Garbaruk 52t 131
Chainring bolts NA
Chain KMC 12
Shifters SRAM Red W/ Ratio 255
Cassette China 12s 11-34t
Wheels:
hubs Circus Monkey
Spokes Sapim CX Ray
Rims LightBicycle 55mm
Inntertubes RideNow
Tires Continental gp5000 25c
Pedals Time Expresso 15

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 217
- Joined: Wed Jan 08, 2020 9:06 pm
Cool project.
Not sold on the colouring of the chainring and gear/brake cables though. Sometimes less is more, but each to their own!
Not sold on the colouring of the chainring and gear/brake cables though. Sometimes less is more, but each to their own!
-
- Posts: 149
- Joined: Sat Jul 24, 2010 12:11 am
One vote yes on the chainring
One vote no on the chainring...
The gearing is a little extreme but around here I end up below sea level during rides... I may have to transition to a larger cassette or smaller ring if I go elsewhere.
Sent from my Pixel 6 using Tapatalk
One vote no on the chainring...
The gearing is a little extreme but around here I end up below sea level during rides... I may have to transition to a larger cassette or smaller ring if I go elsewhere.
Sent from my Pixel 6 using Tapatalk
Im not commenting on the gearing but an applause for the bold choide on the color side!
Well done and looks pretty good!

Well done and looks pretty good!
Ha! Looks really good - like the bold coloring
Looks wild 

Amazing! For me it's still not enough colour. What about bar end plugs or cable ends in purple or orange too?
Great detail on the nipples and cable
Great detail on the nipples and cable
"I want to absorb all of your pop culture"
-
- Posts: 149
- Joined: Sat Jul 24, 2010 12:11 am
Because the bottle cages only fit tapered bottles I painted some orange to match the frame...Tallboy wrote:Amazing! For me it's still not enough colour. What about bar end plugs or cable ends in purple or orange too?
Great detail on the nipples and cable
But if anyone knows of a cheap aero derailleur cage I wouldn't mind getting one and some purple pulleys.

Sent from my Pixel 6 using Tapatalk
Hope and superstar do purple pulley wheels?
"I want to absorb all of your pop culture"
-
- Posts: 149
- Joined: Sat Jul 24, 2010 12:11 am
I've seen a few out there but I would get a new cage with it at the same time. But I don't think an aero wide range force cage is a thing. It would probably look misplaced on the bike anyway.Tallboy wrote:Hope and superstar do purple pulley wheels?
Sent from my Pixel 6 using Tapatalk
Those cages look great. My bike just got purple hope brakes fitted and it's made me realise my cages aren't a good colour match. Maybe I'll try orange or black
"I want to absorb all of your pop culture"

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com