tune SpeedNeedle seatpost compatibility list

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

Post Reply
tcurtbike
Best Freak bike poster
Posts: 426
Joined: Mon May 25, 2009 9:34 am
Location: VIC, Australia

by tcurtbike

I can confirm the Speedneedle is compatible with the Zipp Service Course SL post. You may need a longer bolt at the front if you want to run anymore of an angle than photographed however.

Image
Last edited by tcurtbike on Mon Dec 25, 2017 5:21 am, edited 1 time in total.

benread
Posts: 5
Joined: Tue Mar 19, 2013 5:58 am

by benread

Does anyone know if the Speedneedle is compatible with a ENVE 27.2 mm, 400 mm, 25 mm Seat back post?

by Weenie


CGT
Posts: 397
Joined: Fri Jan 05, 2007 5:33 pm
Location: Stockholm, Sweden

by CGT

It is, you just need the wedges for oversized rails.

nrsnow
Posts: 267
Joined: Fri Aug 11, 2006 2:30 am

by nrsnow

Tune Speedneddle Marathon and Scott Spark LTD Ritchey Stubby?
Ridley Excalibur

Scott Spark LTD 8.15kg (retired)

Giant NRS (Retired)
http://weightweenies.starbike.com/forum/viewtopic.php?f=1&t=104531

User avatar
Mads Kock
Posts: 2767
Joined: Thu May 26, 2005 7:52 am
Location: Malmö, Sweden
Contact:

by Mads Kock

nrsnow wrote:Tune Speedneddle Marathon and Scott Spark LTD Ritchey Stubby?


No problems - just get the mounts for oversize carbon rails.

nrsnow
Posts: 267
Joined: Fri Aug 11, 2006 2:30 am

by nrsnow

Mads Kock wrote:
nrsnow wrote:Tune Speedneddle Marathon and Scott Spark LTD Ritchey Stubby?


No problems - just get the mounts for oversize carbon rails.


that could be a problem. Do you know where I could get the mounts?
Ridley Excalibur

Scott Spark LTD 8.15kg (retired)

Giant NRS (Retired)
http://weightweenies.starbike.com/forum/viewtopic.php?f=1&t=104531

8oken
Posts: 30
Joined: Tue Jan 06, 2004 6:16 pm
Location: Nantes, France

by 8oken

Hi everybody,

What about Specialized Sport alloy (27.2mm) seatpost ?

Thanks,

N.

carlesfeliu
Posts: 1
Joined: Thu Aug 22, 2013 6:39 pm

by carlesfeliu

Hi all, what about "Canyo VCLS Post" seat post? Someone mounted Speedneedle in a Canyon road bike?

Thanks,
Carles

timojabumba
Posts: 4
Joined: Sun Sep 29, 2013 5:38 pm

by timojabumba

SN works with Gravity Dropper Turbo LP

Chongteng
Posts: 2
Joined: Sun Sep 08, 2013 11:30 am

by Chongteng

Would it work with 3T Ionic Seatpost ?

Oswald
Posts: 792
Joined: Thu Jan 08, 2004 10:11 pm

by Oswald

Is the Speedneedle Alcantara compatible with the BMC GF01 TTC seatpost?

User avatar
toiyuet
Posts: 169
Joined: Wed Dec 14, 2011 2:47 pm
Location: Hong Kong

by toiyuet

I can confirm the Speedneedle is compatible with the Sevens cycles Ti post. You may need a bolt 10~15mm longer.
Attachments
P3318227.JPG
Last edited by toiyuet on Fri Mar 04, 2016 4:00 pm, edited 2 times in total.

User avatar
the_marsbar
Posts: 1022
Joined: Wed May 13, 2009 5:23 pm
Location: Denmark
Contact:

by the_marsbar

Does anyone know if the Speedneedle is compatible with FSA K-Force Light seatposts with the minimal top clamp (MTC)?

PoorCyclist
Posts: 414
Joined: Wed Dec 07, 2011 1:26 am
Location: California's country side

by PoorCyclist

the_marsbar wrote:Does anyone know if the Speedneedle is compatible with FSA K-Force Light seatposts with the minimal top clamp (MTC)?


Same question here as well, have seen this post used with various oval carbon rails
But unsure for oversized round

by Weenie


DanW
Posts: 1037
Joined: Fri May 02, 2008 5:39 pm
Location: Here, there and everywhere

by DanW

Speedneedle works fine on a KS Lev Integra Ci.

A longer front bolt might be needed if you want to be very nose high but it is fine for me with the nose roughly at the same level as the tail.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post