RSL out front options
Moderator: Moderator Team
Can anyone shed any light on the out front mount for the Bontrager RSL MTB handle bars, I have seen the far less expensive SL7 bar out front mount looks very similar in fitment and design.. would it work on the RSL, cheers
- Attachments
-
- 7DEB153C-1753-48B8-906C-D2314999A085.jpeg (37.31 KiB) Viewed 974 times
-
- EB7AC36B-D7D7-4010-845E-6BFBE3D1B154.jpeg (51.1 KiB) Viewed 974 times
The SL7 mount attaches to the stem, through a hole in the face plate, so there's no way you'd be able to attach it to the RSL one-piece set-up.
Unless that bar has bolts on the underside, making accommodation for an out-front mount, you may be best with something mounting to the top cap. With a steeper stem angle, my preference is the K-Edge adjustable mount - https://k-edge.com/products/adjustable-stem-mount
If the stem angle isn't too steep, they also have a non-adjustable mount that is cheaper and lighter. Either way you end up with a clean underside to the stem and your Garmin or Wahoo is a bit better protected from crashes. No help mounting lights though.
Unless that bar has bolts on the underside, making accommodation for an out-front mount, you may be best with something mounting to the top cap. With a steeper stem angle, my preference is the K-Edge adjustable mount - https://k-edge.com/products/adjustable-stem-mount
If the stem angle isn't too steep, they also have a non-adjustable mount that is cheaper and lighter. Either way you end up with a clean underside to the stem and your Garmin or Wahoo is a bit better protected from crashes. No help mounting lights though.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
You're overthinking it... Per bullet point number three on their own product specs for that bar, "Seamless accessory integration with Blendr (mounts sold separately)"
https://view.publitas.com/trek-bicycle/ ... r23/page/1
https://view.publitas.com/trek-bicycle/ ... r23/page/1
